The production of salad oil by fractional crystallization with solvents

A fractional crystallization method for the winterization of cottonseed oil with solvents was developed in our laboratories and pilot plant. Small amounts of solvent (e.g., 10% by weight of acetone) were mixed with the oil. This mixture was rapidly chilled to 0°C. and kept at this temperature for 3–4 hrs.; the liquid portion was separated from the solids. After solvent evaporation a salad oil of good quality was obtained. The yield is equal to or better than that obtained with conventional methods. The method is suitable for a continuous operation since rapid chilling can be used, and only a short over-all time is necessary. Great advantages of the process are the use of low amounts of solvent and of a refrigeration system not requiring temperatures below 0°C.     

Camera Control in Computer Graphics

Recent progress in modelling, animation and rendering means that rich, high fidelity virtual worlds are found in many interactive graphics applications. However, the viewer's experience of a 3D world is dependent on the nature of the virtual cinematography, in particular, the camera position, orientation and motion in relation to the elements of the scene and the action. Camera control encompasses viewpoint computation, motion planning and editing. We present a range of computer graphics applications and draw on insights from cinematographic practice in identifying their different requirements with regard to camera control. The nature of the camera control problem varies depending on these requirements, which range from augmented manual control (semi‐automatic) in interactive applications, to fully automated approaches. We review the full range of solution techniques from constraint‐based to optimization‐based approaches, and conclude with an examination of occlusion management and expressiveness in the context of declarative approaches to camera control.     

Grounding and ground fault protection of multiple generator installations on medium-voltage industrial and commercial power systems - Part 4: Conclusion and Bibliography Working Group Report

This paper discusses typical grounding practices and ground fault protection methods for medium-voltage generator stators, highlighting their merits and drawbacks. Particular attention is given to applications of multiple generators connected to a single bus. The paper also provides an overview of the generator damage mechanism during stator ground faults. Problem areas associated with each type of grounding are identified and solutions are discussed. The paper also provides a list of references on the topic. The paper is intended as a guide to aid engineers in selecting adequate grounding and ground fault protection schemes for medium-voltage industrial and commercial generators for new installations, for evaluating existing systems, and for future expansion of facilities, to minimize generator damage from stator ground faults. These topics are presented in four separate parts, Parts 1-4. Part 1 covers scope, introduction, user examples of stator ground failure, and theoretical basis for the problem. Part 2 discusses various grounding methods used in industrial applications. Part 3 describes protection methods for the various types of grounding and Part 4 provides a conclusion and bibliography of additional resource material.     

Improvement in wear resistance of plasma sprayed yttria stabilized zirconia coating using nanostructured powder

Plasma sprayed yttria stabilized zirconia coatings were prepared using nanostructured and conventional powders with optimized process parameters for the highest deposition efficiency, the smallest porosity and the highest microhardness. The tribological properties of these coatings against 100C6 steel were then tested with a ball-on-disc arrangement. Results showed that although the friction coefficients of the coatings sprayed using the nanostructured powder were slightly different from those of the coatings sprayed using the conventional powder, the former coatings were more wear resistant than the latter coatings. The wear mechanisms of all the coatings were explained in terms of adhesion-induced spallation and micro-fracturing of lamellae. The improvement in wear resistance of the coatings sprayed using the nanostructured powder could be mainly ascribed to the decrease of micrometer-sized defects such as pores and interlamellar and intralamellar cracks in the coatings.     

Increased risk for falling associated with obesity: mathematicalmodeling of postural control

Recent epidemiological studies report that obesity is positively related to fracture incidence. In the present experiment, a model of postural control was used to examine the impact of an abnormal distribution of body fat in the abdominal area upon postural stability. Obese and lightweight humanoids were destabilized by imposing a small initial angular speed from a neutral standing position. To avoid a loss of stability yielding a stepping reaction or a fall, an ankle torque is necessary to counteract the perturbation. Three torque parameters-ankle torque onset, time to peak torque, and muscular ankle torque-were entered in a program to simulate the intrinsic variability of the human postural control system. A loss of stability was detected when the center of pressure exceeded stability margins. The most striking observation is the nonlinear increase of torque needed to stabilize the humanoid when the motor response was chararterized by delayed temporal parameters. The effect was more pronounced when an anterior position of the center of mass was included in the simulations. This suggests that, when submitted to daily postural stresses and perturbations, obese persons (particularly those with an abnormal distribution of body fat in the abdominal area) may be at higher risk of falling than lightweight individuals     

Molecular Interactions of Tannic Acid with Proteins Associated with SARS-CoV-2 Infectivity

The overall impact of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) on our society is unprecedented. The identification of small natural ligands that could prevent the entry and/or replication of the coronavirus remains a pertinent approach to fight the coronavirus disease (COVID-19) pandemic. Previously, we showed that the phenolic compounds corilagin and 1,3,6-tri-O-galloyl-β-D-glucose (TGG) inhibit the interaction between the SARS-CoV-2 spike protein receptor binding domain (RBD) and angiotensin-converting enzyme 2 (ACE2), the SARS-CoV-2 target receptor on the cell membrane of the host organism. Building on these promising results, we now assess the effects of these phenolic ligands on two other crucial targets involved in SARS-CoV-2 cell entry and replication, respectively: transmembrane protease serine 2 (TMPRSS2) and 3-chymotrypsin like protease (3CLpro) inhibitors. Since corilagin, TGG, and tannic acid (TA) share many physicochemical and structural properties, we investigate the binding of TA to these targets. In this work, a combination of experimental methods (biochemical inhibition assays, surface plasmon resonance, and quartz crystal microbalance with dissipation monitoring) confirms the potential role of TA in the prevention of SARS-CoV-2 infectivity through the inhibition of extracellular RBD/ACE2 interactions and TMPRSS2 and 3CLpro activity. Moreover, molecular docking prediction followed by dynamic simulation and molecular mechanics Poisson–Boltzmann surface area (MMPBSA) free energy calculation also shows that TA binds to RBD, TMPRSS2, and 3CLpro with higher affinities than TGG and corilagin. Overall, these results suggest that naturally occurring TA is a promising candidate to prevent and inhibit the infectivity of SARS-CoV-2.     

Survey of users and providers of recycled water: quality concerns and directions for applied research

Users and providers of recycled water in Queensland, Australia, were canvassed to ascertain concerns about recycled water quality and directions for applied research. Some 79% of respondents had concerns about recycled water quality including microbiological components, such as viruses, parasites and bacteria, salinity related components, aggregate components, such as pH and solids, nutrients, organic components, including pesticides and endocrine disruptors, as well as quality variability. Relative differences in the proportion of concern for some quality characteristics were observed between the areas of different population density with those from the low population areas being more concerned than those from medium or high areas. Some users and providers observed changes in recycled water quality during distribution including nutrients, chlorine, solids, colour and odour. Some 52% of providers and 19% of current users propose to expand their usage and 30% of non-users propose to commence doing so in the next 5 years. Recycled water quality characteristics identified for applied research included microbiological components, organic components, nutrients and salinity.     

Preferences of therapists-in-training for client characteristics.

The preferences of 132 therapists-in-training for 16 client characteristics were investigated using a paired comparison methodology. Therapists most preferred to work with clients who were psychologically minded, shared similar attitudes and values, and had dissimilar personally troubling problems. They least preferred to work with clients who were not psychologically minded, had dissimilar attitudes and values, and were older. Order of preferences was not influenced by therapist sex, race, clinical experience, socioeconomic status, sexual orientation, or theoretical orientation. Limitations of this study as well as implications for further research and training are discussed. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

In situ, High-Resolution Measurement of Dissolved Sulfide Using Diffusive Gradients in Thin Films with Computer-Imaging Densitometry

The technique of diffusive gradients in thin films (DGT) has been developed for the measurement of dissolved sulfide. Sulfide species from the sampled waters diffuse through a polyacrylamide hydrogel and then react with pale yellow AgI((s)), incorporated at the surface of a second gel, to form black Ag(2)S((s)). The accumulated sulfide can be measured with a conventional purge-and-trap method followed by colorimetry (methylene blue). This enables the dissolved-sulfide concentration to be calculated under suitable conditions. Alternatively, the color change in the accumulating gel can be used to measure sulfide. A conventional flat-bed scanner, allied to imaging software, provided a densitometric measurement that was quantitatively related to the amount of sulfide accumulated. DGT measurements on synthetic solutions accurately determined the sulfide concentration (95% recovery), thereby confirming the unobstructed diffusion of HS(-) through the gel. The accumulated mass was inversely proportional to the diffusion-layer thickness as theoretically predicted. With the selected geometry, the limit of detection of the densitometric procedure for a 24-h deployment was 0.13 μmol L(-)(1), and the maximum concentration measurable was 60 μmol L(-)(1). When used in anoxic lacustrine waters, DGT provided sensible concentrations. It was also used to measure depth profiles at submillimeter resolution in estuarine surface sediments.     

Postural stability in diabetic polyneuropathy

OBJECTIVE: To examine whether sensory changes in lower limbs associated with diabetic sensory polyneuropathy compromise postural stability in different visual sensory conditions. RESEARCH DESIGN AND METHODS: The presence and severity of sensory neuropathy was evaluated with a clinical scale and measures of nerve conduction velocity in the lower limbs. Balance control was evaluated by testing subjects' postural stability (with a force platform) with vision, without vision, and during a recovery period after being without vision. RESULTS: Neuropathic patients showed larger ranges of sway, a faster sway speed, and a greater dispersion of sway than control subjects in all conditions. They also exhibited similar or less stable postural performance with vision than that of control subjects without vision. There was a strong relationship between the severity of the neuropathy and the postural stability. CONCLUSIONS: This experiment highlights that even with vision, the postural stability of neuropathic patients is impaired and may put them at higher risk of falling when performing more challenging daily tasks.