Mechanical Properties Analysis of 4340 Steel Specimen Heat Treated in Oven and Quenching in Three Different Fluids

This paper proposes a statistical approach to analyze the mechanical properties of a standard test specimen, of cylindrical geometry and in steel 4340, with a diameter of 6 mm, heat-treated and quenched in three different fluids. Samples were evaluated in standard tensile test to access their characteristic quantities: hardness, modulus of elasticity, yield strength, tensile strength and ultimate deformation. The proposed approach is gradually being built (a) by a presentation of the experimental device, (b) a presentation of the experimental plan and the results of the mechanical tests, (c) anova analysis of variance and a representation of the output responses using the RSM response surface method, and (d) an analysis of the results and discussion. The feasibility and effectiveness of the proposed approach leads to a precise and reliable model capable of predicting the variation of mechanical properties, depending on the tempering temperature, the tempering time and the cooling capacity of the quenching medium.     

Mechanical investigation of tunnels: risk analysis and notation system

The current mechanical investigation strategy applied to RATP (Régie Autonome des Transpots Parisiens) tunnels is mainly based on visual inspection. All the works are inspected and every apparent fault is located and reported in inspection reports. However, this type of inspection detects only apparent faults without linking them to their causes. A new methodology of mechanical investigation is proposed in the framework of the ANR project MEDITOSS (Méthodologie de Diagnostic des Tunnels et Ouvrages Souterrains en Service), consisting in integrating mechanical investigation tools to better characterise the geometrical and mechanical state of the tunnel. This new strategy combines four techniques (ground penetrating radar, light dynamic penetrometer, endoscopy and geo-mechanical impedance). These techniques are applied to panels to obtain a ‘panel score’. This paper presents a risk analysis of the system studied (network of corridors and tunnels), by applying the bow-tie method in order to obtain information on its elements, its function and its pathologies. This analysis incorporates a quantitative characterisation method (scoring) to assess the state of corridors and tunnels. These methods are tested on infiltration and cracking pathologies for the risk analysis and on the notation of a corridor for the quantitative quantification.     

LED发光式LAN电缆测试器

电缆与连接器故障在LAN(局域网)中相对较常见。图1的电路可以测试直通或交叉式10BaseT、100BaseT或千兆位UTP(非屏蔽双绞线)和STP(屏蔽双绞线)电缆。电路会对每个链接线对作一次连续测试。当电缆两端RJ-45连接器的相应线对正确连     

J integral solution for semi-elliptical surface crack in high density poly-ethylene pipe under bending

The goal of this work is to analyse the severity of semi-elliptical crack defects and to study the degree of damage in the poly-ethylene pipe in bending during the crack propagation. The semi-elliptical cracks are considered in this work located in different position in the wall of the pipe. The three finite element method based on the computation of the J integral was used to analyse the fracture behaviour of these structures. The effect of the position, shape and size of the crack on the J integral values was highlighted. The effects of strain rate and the temperature on the J integral values were also examined. The obtained results show that the strain rates have a strong influence on the J integral values especially for circumferential crack at higher bending moment. However, the energy for circumferential crack is more important compared to axial crack. The effect of the depth of the crack becomes important when the ratio (a/t) reaches a critical value of 0.6 (a/t = 0.6), especially when the ratio a/c is weak (semi-elliptical crack, a/c = 0.2) where the J integral values becomes independently of the crack depth, this conclusion is opposite to the above for the poly-ethylene pipe subjected to internal pressure. We recall finally, that the temperature effect on circumferential cracks behaviour is more important compared to the axial cracks at critical crack size (a/c = 0.2 and a/t = 0.6). It is also shown that in the wall of pipe, the internal cracks are more dangerous than the external cracks.     

Synthesis and characterization of new pyrochlore solid solution Bi1.5Sb1.5Cu1−xMnxO7

A new pyrochlore solid solution with formula Bi_1.5Sb_1.5Cu_1−xMn_xO₇ has been synthesized using ceramic method at 1000 °C. The cell parameter decreases linearly with increasing manganese concentration. Rietveld refinements for (B_1.5Mn_0.5)(Sb_1.5Mn_0.5)O₇ compound using X-ray powder diffraction data confirmed an overall A₂B₂O₇ cubic pyrochlore structure with a = 10.42749 (4) Å and Fd-3m symmetry. The reliability factors are R_wp = 3.48%; R_p = 2.37%; R_exp = 1.65% and R_Bragg = 1.58%. The magnetic susceptibility measurements achieved between 4 and 300 K indicate a paramagnetic behaviour with an oxidation state “2+” of the manganese ion. The electric resistance measured using complex impedance spectroscopy method put in evidence a decrease of the electric resistance with the temperature, which reached 5 × 10² Ω at 675 K. Dielectric properties depend on the variation of frequency and temperature, results indicate a conductive compound.     

Storage technology of onion bulbs c.v. Rouge Amposta: effects of irradiation, maleic hydrazide and carbamate isopropyl, N-phenyl (CIP) on respiration rate and carbohydrates

The effects of γ-irradiation, maleic hydrazide (MH) and carbamate isopropyl, N-phenyl (CIP) on the carbohydrate content, respiration rate (RR) sprouting and rotting of red onion bulbs ( Allium cepa L.) c.v. Rouge Amposta stored at 4, 10 and 20 °C were investigated. Between 6 and 8 weeks soluble sugars increased in concentration and varied between 6.0 and 6.5% fresh weight both at 10 and 20 °C. However, this peak did not exceed 6.0% fresh weight at 4 °C. The basal amount of soluble sugars was about 3% fresh weight. The content appeared to be influenced by temperature, with greater accumulation at 10 and 20 °C than at 4 °C. The RR increased when the bulbs sprouted, whereas it was reduced by the following treatments: irradiation, MH and CIP, the respiration of irradiated bulbs decreased during the final stage of storage because of the death of the sprouts. The chemical treatment used were effective in controlling sprouting of the bulbs during storage, although not as effective as irradiation and chilling.     

Effect of beam sizes on the amplitude and phase of photothermal deflection signals for both uniform and nonuniform heating

A detailed theoretical treatment of a one- (1D) and three-dimensional (3D) photothermal deflection (PTD) technique is presented. Important effects of the probe beam size occur in PTD experiments when the radius of this beam is of the order of magnitude of the thermal diffusion length. The calculation of this effect is checked by experiments in paraffin oil at low modulation frequency as well as for 1D and for 3D. In this last case, we have considered two kinds of deflection: normal and transverse, and we have studied their variation for different values of the pump beam radius. The coincidence between theoretical and experimental curves confirms the validity of our theoretical model.