Development of porous ceramics with well-controlled porosities and pore sizes from apatite fibers and their evaluations

Porous hydroxyapatite (HAp) ceramics possessing well-controlled porosities and pore sizes were developed by firing apatite-fiber compacts mixed with carbon beads and agar. The total porosities could be controlled in the range from 40 to 85% by varying compaction pressure (20-40 MPa), firing temperature (1000-1300 degrees C) and carbon/HAp ratio (0/10-10/10 (w/w)). Most of the pores were regarded as open pores. The pore sizes were mainly affected by the carbon-bead diameter (5, 20 or 150 microm) and partly by the compaction pressure and the firing temperature. The pore sizes of the porous HAp ceramics derived from the carbon beads of 150 microm in diameter were distributed in the two separate ranges of several micrometers and more than 100 microm.     

Self-assembly of a silica-surfactant nanocomposite in a porous alumina membrane

A mesoporous membrane composed of nanochannels with a uniform diameter has a potential use for precise size-exclusive separation of molecules. Here, we report a novel method to form a hybrid membrane composed of silica-surfactant nanocomposite and a porous alumina membrane, by which size-selective transport of molecules across the membrane becomes possible. The nanocomposite formed inside each columnar alumina pore was an assembly of surfactant-templated silica-nanochannels with a channel diameter of 3.4 nm; the channel direction being predominantly oriented along the wall of the columnar alumina pore. Molecules could be transported across the membrane including the silica-surfactant nanocomposite with a capability of nanometre-order size-exclusive separation. Our proposed membrane system has a potential use not only for separation science, but also catalysis and chip technologies.     

The influence of a fibre structure on optical loss in a graded-index fibre

For designing a fibre structure, the influence of structural parameters on optical loss is investigated experimentally for a graded-index fibre. The fibre with large cladding/outer-layer index difference and small cladding thickness is found to have large excess loss near excitation points, such as a launching point and a splicing point.     

Liquid holdup and heat transfer coefficient between bed and wall in liquid solid and gas-liquid-solid fluidized beds

In fluidized beds of 0.052 and 0.12 m i.d. air, water and aqueous solutions of carboxymethyl cellulose (viscosity = 9.0 X 10^-4- 52 X 10^-2 Pa s), and glass beads were used as gas, liquid and solid phase, respectively. The diameters of the glass beads were 4.2 X 10^-4 6.6 X 10^-4 1.2 X l0^-3, and 2.2 X 10^-3 m.The liquid holdup in the gas-liquid-solid fluidized bed was well correlated by modifying the Garside and Al-Dibouni's equation with the gas phase Froude number.The wall heat transfer coefficient of the gas-liquid-solid fluidized beds in the range of stable fluidization state runs correlated as a function of modified Nusselt number, modified Reynolds number and gas phase Froude number.     

Observation of New Longitudinal and Transverse Josephson Plasma Modes in the Parallel Magnetic Fields: Underdoped YBCO

Josephson plasma reflectivity edge in YBa₂Cu₃O_6.6 (T _c=59 K) was measured in parallel magnetic fields HCuO₂ up to 7 T. Upon application of the field, the Josephson plasma edge splits to two reflectivity edges, forming a new peak at finite frequency. Optical conductivity obtained by Kramers–Kronig analysis indicates that a new transverse Josephson plasma mode appears under parallel fields. We propose that the new mode originates from the modulation of the insulating layers with and without Josephson vortices, as has been suggested by free-energy calculations of Josephson vortices with moderate densities.     

2-Aminoethoxydiphenyl borate (2-APB) inhibits capacitative calcium entry independently of the function of inositol 1,4,5-trisphosphate receptors

Capacitative calcium entry (CCE), the mechanism that replenishes intracellular calcium stores after depletion, is essential to intracellular calcium signaling. CCE is mediated by the channels in the plasma membrane generally referred to as "store operated channels (SOCs)". However, the molecular identity of the SOCs has never been determined, and the mechanism of the activation of SOCs remains to be elucidated. Recent studies have demonstrated that 2-aminoethoxydiphenyl borate (2-APB), which has been found to be an antagonist of inositol 1,4,5-trisphosphate receptors (IP3Rs), inhibits CCE, suggesting that IP3Rs channel activity is essential to the generation of CCE. However, CCE has also been reported to occur normally in IP3R-deficient cells. In order to resolve this discrepancy, we investigated the effect of 2-APB on CCE in IP3Rs-deficient cells. In response to store depletion with thapsigargin or N,N,N',N'-tetrakis (2-pyridylmethyl) ethylene diamine (TPEN), CCE was generated in IP3Rs-deficient cells the same as in wild-type cells, however, 2-APB abolished CCE in IP3Rs-deficient cells, despite the fact that this cell line does not possess functional IP3Rs. We also examined the effect of 2-APB on several types of TRP Ca2+ channels, which exhibit properties similar to those of SOCs. 2-APB had a different inhibitory effect on spontaneous and thapsigargin-induced Ba2+ influx in cells that transiently expressed individual TRP subtypes. These results suggest that the channel activity of IP3Rs is not essential to the generation of CCE in this cell line and that 2-APB inhibits CCE independently of the function of IP3Rs.     

A service provisioning system for distributed personalization with private data protection

Personalized services can provide significant user benefits since they adapt their behavior to better support the user. Personalized services use a variety of data related to the user to decide their behavior. Thus personalized service needs a provisioning system that can collect the data that impacts service behavior and allows selection of the most appropriate service. However, in the coming ubiquitous environment, some data necessary for determining service behavior might be unavailable due to two possible reasons. One is that the data does not exit. The other is that the data exists but cannot be accessed. For example, users do not want to disclose their personal information, and service providers do not also want to expose data related to their knowhow in services. This paper describes a new service provisioning system for distributed personalization with private data protection. Specifically, the system selects applicable services by assessing how well each candidate service behaves when some data is missing. It then executes those selected services while hiding the users’ and providers’ private data in a distributed manner. We first summarize the requirements for a personalized service system, and introduce our fundamental policies for the system. The two main components of our system are then described in detail. One component is a service assessment mechanism that can judge if a service can work without data that can be used for adaptation. The second component is a service execution mechanism that can utilize private data while still ensuring privacy. This component divides service logic and executes divided logic where necessary data is available. The paper finally describes our prototype implementation and its performance evaluation results.     

Present status of beryllides for fusion and industrial applications in Japan

Beryllides have remarkable characteristics besides their low density, such as high radiation resistance, high chemical stability, low hydrogen isotope retention and good high temperature mechanical strength especially for fusion applications. In order to have a practical usage for industrial applications, it is important to compile a set of quantitative data on such properties. It is also important to develop fabrication and processing paths to assure the processing of inherently brittle beryllides.The characterization and manufacturing technologies development have been carried out mainly on the Be₁₂Ti interemetallic compounds at the Be-rich side of the Be-Ti binary system. In the present paper, up-dated results on several properties are described for the compound fabricated by hot isostatic pressing (HIP) and ingot metallurgy. Mechanical properties of the compounds having a duplex microstructure with neighboring phases are evaluated by compressive tests from room temperature to 1273 K. Radiation damage of the compound is preliminary studied by charged particle irradiation. Oxidation in air and the interaction with water vapor are evaluated. Thermal desorption of the deuterium is examined by using transmission electron microscopy (TEM) and thermal desorption spectrometry (TDS). Through these evaluations it seems that Be₁₂Ti is superior as neutron multiplier with respect to pure Be metal.     

Numerical Study of C–V Characteristics of Double-Gate Ultrathin SOI MOSFETs

Capacitance-voltage (C-V) characteristics of double-gate ultrathin silicon-on-insulator (SOI) MOSFETs are numerically investigated in detail. The measured back-gate bias dependence is reproduced by the Poisson-Schrodinger solver including the highly precise physical models for many-body interactions of carrier-carrier and carrier-ion, and for incomplete ionization of doping impurities in whole semiconductor regions of n⁺poly-Si/oxide/SOI/oxide/p-Si capacitor including the volume inversion. In addition, we study the higher subband effect at higher temperature in detail, in order to deduce the impacts of self-heating and nonstatic transport