Durable Ultraflexible Organic Photovoltaics with Novel Metal‐Oxide‐Free Cathode

Flexible and stretchable organic photovoltaics (OPVs) are promising as a power source for wearable devices with multifunctions ranging from sensing to locomotion. Achieving mechanical robustness and high power conversion efficiency for ultraflexible OPVs is essential for their successful application. However, it is challenging to simultaneously achieve these features by the difficulty to maintain stable performance under a microscale bending radius. Ultraflexible OPVs are proposed by employing a novel metal‐oxide‐free cathode that consists of a printed ultrathin metallic transparent electrode and an organic electron transport layer to achieve high electron‐collecting capabilities and mechanical robustness. In fact, the proposed ultraflexible OPV achieves a power conversion efficiency of 9.7% and durability with 74% efficiency retention after 500 cycles of deformation at 37% compression through buckling. The proposed approach can be applied to active layers with different morphologies, thus suggesting its universality and potential for high‐performance ultraflexible OPV devices.     

A Method of Obtaining Catchment Basins with Contour Lines for Foam Image Segmentation

Foam image segmentation, represented by watershed algorithm, is wildly used in the extraction of bubble morphology features. H-minima transformation was proved to be effective in locating the catchment basins in the traditional watershed segmentation method. To further improve the accuracy of watershed segmentation, method of top-bottom-cap filters and method of morphological reconstruction were implied to marking the catchment basins. In this paper, instead of H-minima transformation, a method of contour lines is specially proposed to obtain the catchment basins for foam image segmentation by using top-bottom-cap filters and less morphological reconstruction. Experimental results in foam segmentation show that the proposed method is equally accurate but more efficient than the method of H-minima plus morphological reconstruction, and equally efficient but more accurate than the method of H-minima plus top-bottom-cap filters.     

Effect of interpolation on specular reflections in texture‐based automatic colonic polyp detection

Reflections of LED light cause unwanted noise effects called specular reflection (SR) on colonoscopic images. The aim of this study was to seek answers to the following two questions. (a) How are the texture features used in automatic detection of polyps affected by the interpolation on specular reflections? (b) If they are affected does it really affect the classification performance? In order to answer these questions, we used 610 colonoscopy images, and divided each image into tiles whose sizes were 32‐by‐32 pixels. From these tiles, we selected the ones without any specular reflection. We added different shape and size specular reflections cropped from real images onto the reflection‐free tiles. We then used the nearest neighbors, bilinear and bicubic interpolation techniques on the tiles on which SRs were added. On these tiles we extracted 116 texture features using 3 second‐order approaches, and 4 first‐order statistics. First, we used paired sample t test. Second, we performed automatic classification of polyps and background using random forest and k nearest neighbors (k‐NN) approaches using the texture features for different combinations of specular reflections added on the tiles from the polyp or background. The results showed that depending on the size of specular reflection, interpolation can cause a significant difference between the texture features that were coming from reflection‐free tiles and the same tiles on which interpolation was performed. In addition, we note that bicubic interpolation may be preferred to eliminate specular reflection when texture features are used for background and polyp discrimination.     

Compact bidirectional circularly polarized dedicated short range communication antenna for on‐board unit vehicle‐to‐everything applications

This article presents a newly circularly polarized (CP) antenna for V2X's dedicated short range communications applications. Its CP characteristic is enabled by a 70 Ω sequential phase feeding network and sequential rotation technique designed on top of the substrate. It has features of ≈90° phase difference in sequence between ports of S₂₁ = 2.4°, S₃₁ = ?87°, S₄₁ = ?180°, and S₅₁ = ?276°, resulting in a 2.19 dB axial ratio centered at 5.9 GHz. The length of the SP feeding network to each ports designed in the different form of meander lines are the key to control the generated phase at the center frequency It also contributes to the smaller final size of 0.59λ × 0.59λ. The proposed antenna operated from 5.850 to 5.925 GHz with a gain between 4 and 6 dBi. The gains are radiated in bidirectional mode due to the presence of the complimentary dipoles located on the opposite side of the substrate. These features indicate the suitability of the proposed antenna in compliance to the ITS‐G5 OBU V2X standard.     

Synthesis of poly(acrylonitrile‐co‐divinylbenzene‐co‐vinylbenzyl chloride)‐derived hypercrosslinked polymer microspheres and a preliminary evaluation of their potential for the solid‐phase capture of pharmaceuticals

Poly[acrylonitrile (AN)‐co‐divinylbenzene (DVB)‐co‐vinylbenzyl chloride (VBC)] terpolymers were synthesized by precipitation polymerization in the form of porous polymer microspheres. The poly(AN‐co‐DVB‐co‐VBC) polymers were then hypercrosslinked, via a Friedel‐Crafts reaction with FeCl₃ in nitrobenzene, to provide a significant uplift in the specific surface areas of the polymers. FTIR spectra of the hypercrosslinked poly(AN‐co‐DVB‐co‐VBC)s showed that the chloromethyl groups derived from VBC were consumed by the Friedel‐Crafts reactions, which was consistent with successful hypercrosslinking. Hypercrosslinking installed a number of new, small pores into the polymers, as evidenced by a dramatic increase in the specific surface areas upon hypercrosslinking (from ～530 to 1080 m² g^?1). The hypercrosslinked polymers are very interesting for a range of applications, not least of all for solid‐phase extraction (SPE) work, where the convenient physical form of the polymers (beaded format), their low mean particle diameters, and narrow particle size distributions, as well as their high specific surface areas and polar character (arising from the AN residues), make them attractive candidates as SPE sorbents. In this regard, in a preliminary study one of the hypercrosslinked polymers was utilized as an SPE sorbent for the capture of the polar pharmaceutical diclofenac from a polar environment. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45677.     

A computationally efficient selected mapping technique for reducing PAPR of OFDM

In orthogonal frequency division multiplexing (OFDM) system, high value of peak-to-average power ratio (PAPR) is an operational problem that may cause non-linear distortion resulting in high bit error rate. Selected mapping (SLM) is a well known technique that shows good PAPR reduction capability but inflicts added computational overhead. In this paper, using Riemann sequence based SLM method, we applied reverse searching technique to find out low PAPR yielding phase sequences with significant reduction in computational complexity. Additionally, we explored side-information free transmission that achieves higher throughput but sacrifices PAPR reduction. Finally, to overcome this loss in PAPR reduction, we proposed application of Square-rooting companding technique over the output OFDM transmitted signal. Simulation results show that the proposed method is able to compensate the sacrifice in PAPR and achieved PAPR reduction of 8.9 dB with very low computational overhead.     

Buckling and mechanical instability of ZnO nanorods grown on different substrates under uniaxial compression

Mechanical instability and buckling characterization of vertically aligned single-crystal ZnO nanorods grown on different substrates including Si, SiC and sapphire (α-Al(2)O(3)) was done quantitatively by the nanoindentation technique. The nanorods were grown on these substrates by the vapor-liquid-solid (VLS) method. The critical load for the ZnO nanorods grown on the Si, SiC and Al(2)O(3) substrates was found to be 188, 205 and 130?μN, respectively. These observed critical loads were for nanorods with 280?nm diameters and 900?nm length using Si as a substrate, while the corresponding values were 330?nm, 3300?nm, and 780?nm, 3000?nm in the case of SiC and Al(2)O(3) substrates, respectively. The corresponding buckling energies calculated from the force displacement curves were 8.46 × 10(-12), 1.158 × 10(-11) and 1.092 × 10(-11)?J, respectively. Based on the Euler model for long nanorods and the J B Johnson model (which is an extension of the Euler model) for intermediate nanorods, the modulus of elasticity of a single rod was calculated for each sample. Finally, the critical buckling stress and strain were also calculated for all samples. We found that the buckling characteristic is strongly dependent on the quality, lattice mismatch and adhesion of the nanorods with the substrate.     

Coating of stainless steel and titanium bipolar plates for anticorrosion in PEMFC: A review

Anticorrosion coating for stainless steel (SS) and titanium bipolar plates were evaluated to improve the corrosion resistance and electrical conductivity in PEMFC. The PEMFC offers clean and environmentally friendly usage in electrical power systems. The bipolar plates contribute 60%–80% of the total components of PEMFC stack with electrical conductivity >100 S cm^?1. Therefore, high conductivity and corrosion resistance are observed for long-term operations in PEMFC. Recent works has developed the cost-effective and feasible alternative materials to replace graphite bipolar plates. Metallic materials, such as SS and titanium, possess good electrical conductivity but poor corrosion resistance. Coating of SS and titanium bipolar plates can improve the corrosion resistance of metallic bipolar plates. Excellent performance of bipolar plates was recorded by using NbC coating for stainless steel materials. The ICR value using plasma surface alloying method was 8.47 mΩ cm² with a low current density (I_corr) between 0.051 and 0.058 μA cm^?2. The criteria for both current densities (<1 μA cm^?2) and electrical conductivity (<10 mΩ cm²) met the DOE's 2020 technical targets. In addition, conventional air brush method can be used for fabricating multilayer coatings onto substrates because it is self-cleaning, low cost and offers high volume and large area production. Vapor deposition method, a highly advanced coating technology using PVD, suitable for coating bipolar plates because it is environmentally friendly and can be used in high temperatures, producing materials with good impact strength and excellent abrasion resistance. PEMFC cost is still too high for large scale commercialization, which is the cost of raw material and processing to allow fabrication of thinner plates contributes substantially to the total PEMFC cost. Some future works on fuel cell anticorrosion research with reasonable coating method is suggested to reduce the cost in order to facilitate the move toward commercialization especially for SS and titanium bipolar plates.