Coating of stainless steel and titanium bipolar plates for anticorrosion in PEMFC: A review

Anticorrosion coating for stainless steel (SS) and titanium bipolar plates were evaluated to improve the corrosion resistance and electrical conductivity in PEMFC. The PEMFC offers clean and environmentally friendly usage in electrical power systems. The bipolar plates contribute 60%–80% of the total components of PEMFC stack with electrical conductivity >100 S cm^?1. Therefore, high conductivity and corrosion resistance are observed for long-term operations in PEMFC. Recent works has developed the cost-effective and feasible alternative materials to replace graphite bipolar plates. Metallic materials, such as SS and titanium, possess good electrical conductivity but poor corrosion resistance. Coating of SS and titanium bipolar plates can improve the corrosion resistance of metallic bipolar plates. Excellent performance of bipolar plates was recorded by using NbC coating for stainless steel materials. The ICR value using plasma surface alloying method was 8.47 mΩ cm² with a low current density (I_corr) between 0.051 and 0.058 μA cm^?2. The criteria for both current densities (<1 μA cm^?2) and electrical conductivity (<10 mΩ cm²) met the DOE's 2020 technical targets. In addition, conventional air brush method can be used for fabricating multilayer coatings onto substrates because it is self-cleaning, low cost and offers high volume and large area production. Vapor deposition method, a highly advanced coating technology using PVD, suitable for coating bipolar plates because it is environmentally friendly and can be used in high temperatures, producing materials with good impact strength and excellent abrasion resistance. PEMFC cost is still too high for large scale commercialization, which is the cost of raw material and processing to allow fabrication of thinner plates contributes substantially to the total PEMFC cost. Some future works on fuel cell anticorrosion research with reasonable coating method is suggested to reduce the cost in order to facilitate the move toward commercialization especially for SS and titanium bipolar plates.     

Non-Newtonian laminar pulsating heat and fluid flow in plane duct

In the present study, laminar pulsating power-law momentum and heat transfer in a uniformly heated plane duct is studied analytically. Assuming that fully developed conditions exist both hydrodynamically and thermally, a perturbation series method is utilized to derive analytical solutions for the momentum and energy balance equations, and the amplitude is prescribed as the perturbation parameter. For varying values of the power-law index ( $n$), representing pseudoplastic, Newtonian, and dilatant fluids, effects of dimensionless amplitude ( $ϵ$) and frequency ( $F$) on periodic and period-averaged friction factor and Nusselt number are obtained. The results obtained for Newtonian fluid are shown to be in good harmony with the corresponding findings in the open literature.     

Dual Activity BLEG-1 from Bacillus lehensis G1 Revealed Structural Resemblance to B3 Metallo-β-Lactamase and Glyoxalase II: An Insight into Its Enzyme Promiscuity and Evolutionary Divergence

Metallo-β-lactamases (MBLs) are class B β-lactamases from the metallo-hydrolase-like MBL-fold superfamily which act on a broad range of β-lactam antibiotics. A previous study on BLEG-1 (formerly called Bleg1_2437), a hypothetical protein from Bacillus lehensis G1, revealed sequence similarity and activity to B3 subclass MBLs, despite its evolutionary divergence from these enzymes. Its relatedness to glyoxalase II (GLXII) raises the possibility of its enzymatic promiscuity and unique structural features compared to other MBLs and GLXIIs. This present study highlights that BLEG-1 possessed both MBL and GLXII activities with similar catalytic efficiencies. Its crystal structure revealed highly similar active site configuration to YcbL and GloB GLXIIs from Salmonella enterica, and L1 B3 MBL from Stenotrophomonas maltophilia. However, different from GLXIIs, BLEG-1 has an insertion of an active-site loop, forming a binding cavity similar to B3 MBL at the N-terminal region. We propose that BLEG-1 could possibly have evolved from GLXII and adopted MBL activity through this insertion.     

Conductivity enhancement by controlled percolation of inorganic salt in multiphase hexanoyl chitosan/polystyrene polymer blends

Hexanoyl chitosan and polystyrene blends are immiscible by the elucidation of the glass transition temperature (T_g) as well as the viscometric and morphological analyses. Selective localization of the lithium salt in hexanoyl chitosan phase as the percolation pathway enhanced the conductivity in the blends as compared to the neat hexanoyl chitosan. The ionic conductivity of a polymer electrolyte is described by σ = enμ. Thus, estimation of charge carrier density (n) and mobility (μ) is important in order to assess the performance. In this work, these parameters are calculated using impedance spectroscopy and FTIR.     

Review of Dendritic Cells,Their Role in Clinical Immunology,and Distribution in Various Animal Species

Dendritic cells (DCs) are cells derived from the hematopoietic stem cells (HSCs) of the bone marrow and form a widely distributed cellular system throughout the body. They are the most efficient, potent, and professional antigen-presenting cells (APCs) of the immune system, inducing and dispersing a primary immune response by the activation of naïve T-cells, and playing an important role in the induction and maintenance of immune tolerance under homeostatic conditions. Thus, this review has elucidated the general aspects of DCs as well as the current dynamic perspectives and distribution of DCs in humans and in various species of animals that includes mouse, rat, birds, dog, cat, horse, cattle, sheep, pig, and non-human primates. Besides the role that DCs play in immune response, they also play a pathogenic role in many diseases, thus becoming a target in disease prevention and treatment. In addition, its roles in clinical immunology have also been addressed, which include its involvement in transplantation, autoimmune disease, viral infections, cancer, and as a vaccine target. Therefore, based on the current knowledge and understanding of the important roles they play, DCs can be used in the future as a powerful tool for manipulating the immune system.     

A review on energy scenario and sustainable energy in Indonesia

The global energy consumption is likely to grow faster than the population growth. The fuel consumption was growing from 6630 million tons of oil equivalents (Mtoe) in 1980 to 11,163 Mtoe in 2009. This projected consumption will increase 1.5% per year until 2030 and reach 16,900 Mtoe and the main drivers of this growth are mostly developing countries in Asia. Indonesia is one of the developing countries and energy supply is an important factor for all-around development. The country's energy consumption still depends on non-renewable energy such as crude oil, coal and natural gas as sources of energy. Utilization of fossil fuel continuously contributes to huge amount of greenhouse gases emission that leads to climate change. Facing such an unfavorable situation, the government of Indonesia prioritizes on energy supply securities by diversification of energy resources. The energy mixes in Indonesia based on five main resources; these are crude oil, natural gas, coal, hydropower, and renewable energy. Although the country encourages utilizing renewable energy, the contribution is only around 3%. Considering natural condition and geography, this country is blessed with great potential of renewable energy such as solar energy, wind energy, micro hydro and biomass energy. Noting the potential of renewable and sustainable energy resources in the country, the government must pay more attention on how to utilize it. Many efforts have been done to promote renewable energy such as to create energy policy and regulations, yet it still did not give any satisfactory result. Government, non-government agencies and the public should take a more proactive step to promote and use renewable energy in order to achieve the secure and environmentally sustainable energy resources.     

Synthesis of aluminum nanoparticles by electromagnetic levitational gas condensation method

A novel electromagnetic levitational gas condensation (ELGC) system was designed and manufactured for the synthesis of aluminum nanoparticles. Both liquid and membrane filtration systems were used for collecting the nanoparticles. Effects of induction coil design, input power and gas flow rate were investigated. It was found that the wet collection in toluene resulted in a smaller particle size than the dry collection on membrane filter. While using low argon flow rate, coarser particles were produced, high argon flow rate intensified the particle coalescence. The best argon flow rate for the synthesis of aluminum nanoparticles was found about 10-15 lit/min.