Cuticular hydrocarbons ofReticulitermes virginicus (Banks) and their role as potential species- and caste-recognition cues

The cuticular hydrocarbon components of four castes ofReticulitermes virginicus (Banks) have been identified and quantitated. Components identified includen-alkanes; 2-, 3-, 11-, 13-, and 15-methyl-alkanes; 11,15-dimethylalkanes, (Z)-9-alkenes; (Z,Z)-7,9-dienes; and (E/Z)-6,9-dienes ranging in carbon number from C₂₁ to C₄₀. All caste forms ofR.virginicus contained the same components, but showed caste-specific proportions. Comparison of these hydrocarbons with those of the sympatric termiteR. flavipes (Kollar) suggest that cuticular hydrocarbons might serve as species- and caste-recognition cues. A bioassay was developed to test this species-recognition hypothesis, with the experimental results supporting the hypothesis.Isoptera: Rhinotermitidae.     

Microstructure and Flow Behavior of Fresh Cement Paste

A rheological technique (creep/recovery) was used, in combination with scanning electron microscopy, to study the effects of hydration on both the microstructure and flow properties of fresh cement paste during the induction period, which is the first few hours after cement and water are mixed. The principal hydration product was calcium silicate hydrate (C-S-H), which was first observed in the neck areas between cement particles. At the same time, yield stress increased progressively, which reflected a strengthening of bonds between particles attributed to the C-S-H. Failure strain also increased, which reflected a fundamental change in the nature of that bond. Based on rheological measurements, the activation energy of the hydration process during this time period was estimated to be 5.2 kcal/mol (˜22 kJ/mol).     

Formation of bed agglomeration in a fluidized multi-waste incinerator

A case study was carried out to investigate the bed agglomeration observed in a fluidized bed incinerator when burning blends of three wastes (carbon soot, biosludge and fuel oil). Several instrumental approaches were employed (i.e. XRF, SEM, XRD, and ICP-AES) to identify the bed materials (fresh sand and degrader sand) and clinkers formed in the full-scale incinerator tests. Several elements (V, Al, S, Na, Fe, Ni, P, and Cl), which normally are associated with the formation of low melting point compounds, were found in the waste blends at high content levels. The clinker bridges were identified to be associated with Al, Fe, V, K, Na, S, Ni, and Si elements.The effects of temperature and blending ratio were investigated in a muffle furnace. Carbon soot is believed to be more susceptible to the clinker formation than the other two fuels. Thermodynamic multi-phase multi-component equilibrium calculations predict that the main low melting point species could be Al₂(SO₄)₃, Fe₂(SO₄)₃, Na₂SO₄, NaCl, Na₂SiO₃ and V₂O₅. This information is useful to understand the chemistry of clinker formation. Also, it helps to develop methods for the control and possible elimination of the agglomeration problem for the design fuels.     

A description of phase inversion behaviour in agitated liquid-liquid dispersions under the influence of the Marangoni effect

The influence of the Marangoni effect on phase inversion behaviour is examined by integrating a microscopic study of the drop coalescence process, in which thin film drainage in the presence of insoluble surfactant occurs, into a macroscopic phase inversion model which has been developed previously using a Monte Carlo technique. This is achieved via an immobility factor, obtained from a comparison of the film drainage times for surfactant-laden systems and surfactant-free systems as a function of the drop approach velocity, surface Péclet number, initial surfactant concentration and the Hamaker constant, which is then used to modify the coalescence probability in the phase inversion model. On the one hand, the results indicate that the Marangoni effect removes any influence that the viscosity ratio has on phase inversion due to immobilisation of the interface, thus shielding the flow in the film from the effects of the flow in the dispersed phase; the point at which phase inversion occurs therefore tends towards equivolume holdups with the addition of surfactant. On the other hand, when comparisons are made with pure systems in which surfactant is absent, the system is seen to be either stabilised or de-stabilised from inversion depending on the viscosity ratio of the system. This is attributed to the influence of surfactant on the dispersion morphologies on either side of the inversion (i.e. water-in-oil dispersions and oil-in-water dispersions) and depends on the dispersed phase holdup; the Marangoni effect is felt stronger when the dispersed phase holdup is low.     

A biomarker of n−3 compliance in patients taking fish oil for rheumatoid arthritis

Dietary fish oil supplements have been shown to have benefits in rheumatoid arthritis (RA), other inflammatory diseases, and in cardiovascular disease. As with any medical advice, variability will exist with regard to adherence and consequent biochemical or pharmacophysiologic effects. The aim was to explore the utility of plasma phospholipid EPA as a measure of n−3 PUFA intake and response to standardized therapeutic advice given in an outpatient or office practice setting, to increase dietary n−3 PUFA, including a fish oil supplement. Patients with early RA were given verbal and written advice to alter their dietary n−3 PUFA intake, including ingestion of 20 mL of bottled fish oil on juice daily. The advice included instructions to increase n−3 PUFA and to avoid foods rich in n−6 PUFA. Every 3 mon, blood samples were obtained for analysis of plasma phospholipid FA. Plasma phospholipid EPA was used as the primary index of n−3 PUFA intake. A diverse response was seen, with about one-third of patients achieving a substantial elevation of plasma phospholipid EPA over the 12-mon study period. A third had little change, with the remainder achieving intermediate levels. Data obtained longitudinally from individual patients indicated that substantial elevations of EPA (>5% total plasma phospholipid FA) could be maintained for more than 3 yr. Plasma phospholipid EPA is a convenient measure of adherence to advice to take a dietary n−3 PUFA-rich fish oil supplement. This measure may prove a useful adjunct to intention to treat analyses in determining the effect of dietary fish oil supplements on long-term outcomes in arthritis and other chronic inflammatory diseases. It may also provide a guide to the effectiveness of therapeutic and preventive messages designed to increase n−3 PUFA intake.     

Mechanical analysis of hollow fiber membrane integrity in water reuse applications

In order to gain insight into membrane fiber failure (i.e., loss of integrity), properties of five hollow fiber membranes and four hollow fiber modules were evaluated. Specifically, membrane material, membrane symmetry, fiber modulus of elasticity, fiber diameter and thickness, module potting technique, module flow pattern (inside-out or outside-in), and coliform breakthrough were investigated. The approach combined evaluation of the above properties with mathematical modeling of structure-fluid interactions to comprehensively evaluate the properties most important for maintaining hollow fiber membrane integrity. Tensile strength testing revealed that the strongest fiber was an asymmetric polyacrylonitrile membrane fiber. The weakest fiber was a symmetric polyethylene membrane fiber. Pilot plant testing on the four membrane modules revealed that membrane symmetry may be a more important factor than potting technique for hollow fiber integrity. Results from the SEM and tensile testing were used as input to a finite element analysis model used to evaluate time-dependent structure-fluid interactions. It was found that additional stresses at the juncture of the potting material and the hollow fiber membranes exist. These stresses likely lead to the formation of fractures.     

Barium Metaplumbate Ceramic Electrodes for Ceramic Capacitors

A novel approach to reduce electrode costs in ceramic capacitors is presented. Barium metaplumbate (BaPbO₃) was fired onto sintered commercial (Ba, Sr)TiO₃ disk capacitors as external electrodes. Samples were compared to disk capacitors of the same composition with electrodes made of sputtered gold and air-dried silver. The ceramic electrode led to substantial changes in the insulation resistance and dc breakdown strengths, but other properties remained the same. The feasibility of using BaPbO₃ electrodes strongly depends on chemical reactions between the electrode and dielectric.     

Bright-field scanning confocal electron microscopy using a double aberration-corrected transmission electron microscope

Scanning confocal electron microscopy (SCEM) offers a mechanism for three-dimensional imaging of materials, which makes use of the reduced depth of field in an aberration-corrected transmission electron microscope. The simplest configuration of SCEM is the bright-field mode. In this paper we present experimental data and simulations showing the form of bright-field SCEM images. We show that the depth dependence of the three-dimensional image can be explained in terms of two-dimensional images formed in the detector plane. For a crystalline sample, this so-called probe image is shown to be similar to a conventional diffraction pattern. Experimental results and simulations show how the diffracted probes in this image are elongated in thicker crystals and the use of this elongation to estimate sample thickness is explored.     

Developing a knowledge-based perspective on coordination: The case of global software projects

We have attempted to bring together two areas which are challenging for both IS research and practice: forms of coordination and management of knowledge in the context of global, virtual software development projects. We developed a more comprehensive, knowledge-based model of how coordination can be achieved, and\illustrated the heuristic and explanatory power of the model when applied to global software projects experiencing different degrees of success. We first reviewed the literature on coordination and determined what is known about coordination of knowledge in global software projects. From this we developed a new, distinctive knowledge-based model of coordination, which was then employed to analyze two case studies of global software projects, at SAP and Baan, to illustrate the utility of the model.     

J. H. Kulick, J. M. Jarem, R. G. Lindquist, S. T. Kowel, and M. W. Friends are with the Department of Electrical and Computer Engineering, University of Alabama in Huntsville, Huntsville, Alabama 35899

The development and modeling of a liquid-crystal phase grating for real-time diffractive three-dimensional displays are discussed. The system being developed, which is called the ICVision system, utilizes a number of ideas that will result in a rugged, low-power three-dimensional display offering both vertical and horizontal parallax and eventually full color. Fringing fields created between interdigitated electrodes formed on top of VLSI die will induce a diffraction pattern in a thin layer of liquid crystal that will cover the die. A detailed electrostatic and diffraction analysis of liquid-crystal phase-grating regions that will make up the final display is given here. The electrostatic analysis is developed by use of the method of moments. The diffraction analysis is developed by use of rigorous coupled-wave diffraction theory. The numerical results obtrained from the mathematical model are compared with experimental diffraction results from preliminary LCD cells that have been assembled as prototype ICVision devices.