Principles of reference-aided decision making

A unified approach to decision making with extremal many-criteria models, expert estimates, and voting is developed on the basis of reference and distance concepts and taxonomy methods. It involves the solution of many-criteria problems with the Pareto optimum. Examples demonstrating the effectiveness and universality of the approach are given.     

All-optical phase-independent logic elements based on phase shiftinduced by coherent soliton collisions

We demonstrate, for the first time to our knowledge, that a fast coherent collision between two Kerr spatial solitons can give rise to a significant phase shift for both interacting beams. The maximal collision-induced phase shift ≈π rad takes place when the amplitudes of the solitons are equal (η₁=η₂) and the length of the interaction zone is comparable with a soliton phase period. Depending on the ratio η₂/η₁, and the collision angle between the solitons, the magnitude of the phase shift can be varied within a reasonable range, for example from 180° to 40°. The analysis of the effect performed by the finite-difference beam-propagation method has shown that it is insensitive to the initial phase difference between the incident beams (δ_i), even in the case when η ₁≠η₂. It has been demonstrated that the phenomenon can be used for all-optical three-soliton logic elements, which are capable of providing more than 3-dB signal amplification and possess bi -independent output characteristics     

Microwave beam imaging by recombination continuum from the positive column of gas discharge in a cesium vapor-xenon mixture

A new sensitive method for imaging of the spatial distribution of microwave intensity is proposed. The method is based on the imaging of the 6P-recombination continuum of cesium, emitted from a nonequilibrium plasma of the positive column of gas discharge in a cesium vapor-xenon mixture. It is demonstrated that the spatial distribution of intensity of 35-GHz microwave radiation measured by this method in a focal plane of a lens well coincides with the pattern obtained with the aid of a movable microwave detector. The time resolution of the proposed microwave imaging system reaches 1 ms.     

Analytic Methods of Calculation of the Contact Interaction of Thin-Walled Structural Elements (Review)

We describe main models and methods for the calculation of contact rigidity and wear resistance of friction couples using thin-walled structural elements such as beams, plates, or shells. We analyze certain specific features of their contact interaction on the basis of theories describing stress-strain state. We also consider mathematical models of the wear of junctions that take into account the frictional heating of contacting surfaces and anisotropy of their properties. A series of theoretical calculations is corroborated experimentally.     

The concept of an endurance limit for adhesive joints

The effect of cyclic stressing on the strength of single lap adhesive joints has been studied and a considerable reduction in strength observed when the maximum stress exceeds about 40% of the ultimate tensile strength, but whether or not a true endurance limit exists is not proven. Fallacies are shown in some of the techniques which have been proposed for studying the fatigue behaviour of adhesive joints.     

The role of hydrodynamic stress on the phenotypic characteristics of single and binary biofilms of Pseudomonas fluorescens.

This study investigates the phenotype of turbulent (Re = 5,200) and laminar (Re = 2,000) flow-generated Pseudomonas fluorescens biofilms. Three P. fluorescens strains, the type strain ATCC 13525 and two strains isolated from an industrial processing plant, D3-348 and D3-350, were used throughout this study. The isolated strains were used to form single and binary biofilms. The biofilm physiology (metabolic activity, cellular density, mass, extracellular polymeric substances, structural characteristics and outer membrane proteins [OMP] expression) was compared. The results indicate that, for every situation, turbulent flow-generated biofilms were more active (p < 0.05), had more mass per cm(2) (p < 0.05), a higher cellular density (p < 0.05), distinct morphology, similar matrix proteins (p > 0.1) and identical (isolated strains -single and binary biofilms) and higher (type strain) matrix polysaccharides contents (p < 0.05) than laminar flow-generated biofilms. Flow-generated biofilms formed by the type strain revealed a considerably higher cellular density and amount of matrix polysaccharides than single and binary biofilms formed by the isolated strains (p < 0.05). Similar OMP expression was detected for the several single strains and for the binary situation, not dependent on the hydrodynamic conditions. Binary biofilms revealed an equal coexistence of the isolated strains with apparent neutral interactions. In summary, the biofilms formed by the type strain represent, apparently, the worst situation in a context of control. The results obtained clearly illustrate the importance of considering strain variation and hydrodynamics in biofilm development, and complement previous studies which have focused on physical aspects of structural and density differences.     

Error of measurement of coolant temperature in VVÉR-440 reactor

Translated from Atomnaya Énergiya, Vol. 67, No. 5, pp. 358–359, November, 1989.     

Features of the photoconductivity of iodine-doped cotton fibers illuminated in the fundamental absorption range

The photoelectric properties of cotton fibers treated with iodine were studied in the fundamental absorption range. The samples exhibit a sublinear illumination-current characteristic and a long-term relaxation of photoconductivity (PC) after UV irradiation (hν=5 eV) of the iodine-doped fibers. A PC mechanism is proposed which explains both the nonlinear variation of photocurrent with illumination intensity and the PC decay according to a bimolecular recombination law after UV irradiation of the iodine-doped fiber in the fundamental absorption range.     

Investigation of the initial stage of borating tantalum

The results of investigation of initial stage of the tantalum borating as well as the effect of oxygen and hydrogen on it are presented. The scheme of the initial stage of tantalum boron saturation is proposed.     

New high-efficiency low-waste technology at the Vyksa Metallurgical Plant for operating metallurgical equipment with the use of Kompaks® monitoring systems

Introduction of the BER? KOMPAKS® automated system at the Vyksa Metallurgical Plant to safely and efficiently manage the operation of the plant’s equipment has allowed the facility to begin operating that equipment based on real-time evaluations of its actual physical condition. Introduction of the new system has also allowed better coordination of repair-scheduling with ongoing production operations, significantly improved the reliability and readiness of the equipment for operation at 100% capacity, completely eliminated the human factor from the process of monitoring the condition of equipment, and made it possible to check the quality and timeliness of equipment maintenance and repair work so as to ensure safe, efficient operation of the entire production complex.