Qualitativ-quantitative Simulation, ein Instrument zur Analyse nichtlinearer Regelkreise

Qualitative-quantitative simulation is one of the most productive and promising research areas in Artificial Intelligence to emerge in recent years. This method provides an elegant way for an exhaustive analysis of uncertain dynamic systems. The application of the qualitative-quantitative simulation is shown in this paper. The important question about the stability of a quanlitatively described dynamical system is solved by a novel analytic method.     

Codierte Modulation in modernen Übertragungssystemen

Modern communication systems offer high speed and reliable data transmission services. The quality of these services is achieved by combining coded multi-level modulation techniques and modern digital signal processing (Viterbi-decoding) in the receiver. In this paper we first present an introduction to Trellis Coded Modulation (TCM) and then some new results on unversal techniques adapted for the AWGN-channel as well as for the fading channel. It is shown that TCM is well suited for communication channels with time variant characteristics (e.g. mobile communication channels), especially when our new codes are applied.     

Formation of titanium and cobalt germanides on Si (100) using rapid thermal processing

Titanium and cobalt germanides have been formed on Si (100) substrates using rapid thermal processing. Germanium was deposited by rapid thermal chemical vapor deposition prior to metal evaporation. Solid phase reactions were then performed using rapid thermal annealing in either Ar or N₂ ambients. Germanide formation has been found to occur in a manner similar to the formation of corresponding silicides. The sheet resistance was found to be dependent on annealing ambient (Ar or N₂) for titanium germanide formation, but not for cobalt germanide formation. The resistivities of titanium and cobalt germanides were found to be 20 μΩ-cm and 35.3μΩ-cm, corresponding to TiGe₂ and Co₂Ge, respectively. During solid phase reactions of Ti with Ge, we have found that the Ti₆Ge₅ phase forms prior to TiGe₂. The TiGe₂ phase was found to form approximately at 800° C. Cobalt germanide formation was found to occur at relatively low temperatures (425° C); however, the stability of the material is poor at elevated temperatures.     

Use of sea water in the flotation of carbonate rich sedimentary phosphate rock

There is an appreciable amount of carbonaceous sedimentary phosphate deposits in the northern Africa and the Middle East which are expected to gain importance in the near future because of the depletion of the deposits in Florida. In many of the regions where phosphate deposits are found there is a shortage of fresh water, and sea is not very far. The use of sea water instead of fresh water in flotation of carbonaceous phosphate rock is successfully demonstrated. Thus an appreciable reduction in the operating cost and an ample amount of saving in the fresh water resources of the region is expected.     

Investigation of the stability of tablets prepared from sucrose and citric acid anhydride utilizing response surface methodology

Inversion of sucrose is a stability problem particularly of candies with acidic taste that contain sucrose and small amounts of organic acids such as citric acid, since the free d-fructose produced by hydrolysis is hygroscopic. The following possibilities were investigated for preventing the hydrolysis of sucrose in tablets containing sucrose and citric acid: Adding various amounts of tri-sodium citrate to the formulation to neutralize the citric acid, (Hot) melt coating of citric acid and tri-sodium citrate with a vegetable fat at different coating ratios, variation of the ratio of coated citric acid and tri-sodium citrate in formulations, and compressing the formulations with different compression forces. After tablet processing and storage of tablets, the concentration of d-fructose was determined on the basis of enzymatic reactions. A response surface central composite design was used. The above-mentioned variations were chosen as independent variables and the amount of d-fructose was chosen as response variable. The lowest rates of inversion could be achieved by increasing the content of tri-sodium citrate and the ratio of coating material and decreasing the ratio of coated citric acid and tri-sodium citrate in the tablet formulations. The compression force had no significant effect on the inversion of sucrose.     

Synthesis and characterization of novel polyacrylate-clay sol-gel materials

Organo-functional silanes which were able to form chemical bonds with kaolinite and could also have an affinity to the materials of concern here, were studied by the sol-gel process. Polymethacrylate with trialkoxy silyl functional groups were prepared, hydrolysed and co-condensed with kaolinite. The progress of the hydrolysis, which proceeded very slowly, was followed by Karl-Fischer titration. Thermal behavior was investigated by differential thermal analysis. The extent of the reaction leading to network formation was qualitatively followed by Fourier transform-infrared spectroscopy and X-ray diffraction. Free-radical polymerization was carried out ultrasonically in the presence of a catalyst. Trimethoxy silane end-capped silane was found to be covalently bonded to kaolinite. The copolymers, with various amounts of kaolinite, were then hydrolysed and co-condensed in the presence of a catalyst to yield sol-gel materials which have a controllable combination of properties of both the polymer and kaolinite.     

The effect of elevated temperature and silicon addition on a cobalt-based wear resistant superalloy

The effects of an elevated temperature and a 5 wt% silicon addition on the resultant microstructure and inherent phases of Stellite 6 were investigated by using room and high temperature optical microscopy, X-ray diffraction, scanning electron microscopy (SEM) and also bulk hardness and microhardness measurements. It has been observed that exposing Stellite 6 to heat treatments at 1000°C results in a characteristic textured structure and coarsening of interdendritic regions due to bulk diffusion. In addition, both dendritic and interdendritic hardness values increase due to texture formation and increased amounts of carbide and intermetallic phases, respectively. On the other hand, silicon addition to Stellite 6 causes the transformation of the original spongy dendritic microstructure in as-cast Stellite 6 to a eutectic dendritic and skeleton interdendritic structure. Also, when silicon added Stellite 6 was heat treated at 1000°C, particulates emanating from the interdendritic skeleton become irregularly dispersed in the dendritic region. In addition, similarly to Stellite 6; a high temperature heat treatment results in an increase in hardness values of silicon added Stellite 6 due to the presence of an Co₂ Si intermetallic phase.     

General solution of one-dimensional,time dependent coupled heat flow systems

A new, powerful method of analysis, involving the combined use of finite integral transform and finite element techniques, is presented for the solution of time dependent heat flow systems composed of many one-dimensional elements connected through the nodes. This method leads to an eigenvalue problem which is not of the conventional Sturm-Liouville type. A procedure for the determination of the eigenvalues is described. The solution obtained is in the form of an infinite series and contains quasi-steady and transient terms. The general solution obtained can be applied in the mathematical modelling of many engineering applications such as the determination of the penetration of the daily temperature cycle into buildings, the analysis of heat transfer in array of extended surfaces in compact heat exchangers, and many others.