The long‐term effects of arteriovenous fistula creation on the development of pulmonary hypertension in hemodialysis patients

The aim of this prospective study was to evaluate long‐term effects of arteriovenous fistula (AVF) on the development of pulmonary arterial hypertension (PAH) and the relationship between blood flow rate of AVF and pulmonary artery pressure (PAP) in the patients with end‐stage renal disease (ESRD). This prospective study was performed in 20 patients with ESRD. Before an AVF was surgically created for hemodialysis, the patients were evaluated by echocardiography. Then, an AVF was surgically created in all patients. After mean 23.50 ± 2.25 months, the second evaluation was performed by echocardiography. Also, the blood flow rate of AVF was measured at the second echocardiographic evaluation. Pulmonary arterial hypertension was defined as a systolic PAP above 35 mmHg at rest. Mean age of 20 patients with ESRD was 55.05 ± 13.64 years; 11 of 20 patients were males. Pulmonary arterial hypertension was detected in 6 (30%) patients before AVF creation and in 4 (20%) patients after AVF creation. Systolic PAP value was meaningfully lower after AVF creation than before AVF creation (29.95 ± 10.26 mmHg vs. 35.35 ± 7.86 mmHg, respectively, P: 0.047). However, there was no significant difference between 2 time periods in terms of presence of PAH (P>0.05). Pulmonary artery pressure did not correlate with blood flow rate of AVF and duration after AVF creation (P>0.05). In hemodialysis patients, a surgically created AVF has no significant effect on the development of PAH within a long‐term period. Similarly, blood flow rate of AVF also did not affect remarkably systolic PAP within the long‐term period.     

A study on the characteristics of electrical discharge textured skin pass mill work roll

Electrical discharge texturing induces a recast white layer on the skin pass mill work roll surface, which forms the surface topography required for outer autobody steel strips and a heat-affected zone beneath it. The characteristics of these thermally influenced layers were studied by means of optical and scanning electron microscopes, X-ray diffractometer, radio frequency-glow discharge optical emission spectrometer and microhardness tester. It was found that the electrical discharge texturing led to a dramatic hardness drop in the white layer, which was attributed to the high amount of retained austenite. Moreover, softening was observed in over tempered section within heat-affected zone. Sub-zero and cryogenic treatments seem to be potential methods in order to restore the hardness of white layer and over tempered zone with an increase in both. Additionally, de-ionised water was found to be a promising dielectric liquid to abstain from retained austenite.     

Analysis of ISE in dynamic hardness measurements of β-Sn single crystals using a depth-sensing indentation technique

The dynamic indentation tests on (001) plane β-Sn single crystals having different growth directions under different peak indentation test load (10, 20, 30, 40, and 50 mN) has been investigated. The experimental results reveal that the measured hardness values exhibit a peak-load dependence, i.e., indentation size effect (ISE). Such peak-load dependence is then analyzed using the Meyer's law, the Hays–Kendall's approach, the Elastic/Plastic Deformation model, the Proportional Specimen Resistance (PSR) model, and the Modified PSR (MPSR) model. As a result, Modified PSR model is found to be the most effective for dynamic hardness determination of β-Sn single crystals.     

A site-isolated mononuclear iridium complex catalyst supported on MgO: Characterization by spectroscopy and aberration-corrected scanning transmission electron microscopy

Supported mononuclear iridium complexes with ethene ligands were prepared by the reaction of Ir(C₂H₄)₂(acac) (acac is CH₃COCHCOCH₃) with highly dehydroxylated MgO. Characterization of the supported species by extended X-ray absorption fine structure (EXAFS) and infrared (IR) spectroscopies showed that the resultant supported organometallic species were Ir(C₂H₄)₂, formed by the dissociation of the acac ligand from Ir(C₂H₄)₂(acac) and bonding of the Ir(C₂H₄)₂ species to the MgO surface. Direct evidence of the site-isolation of these mononuclear complexes was obtained by aberration-corrected scanning transmission electron microscopy (STEM); the images demonstrate the presence of the iridium complexes in the absence of any clusters. When the iridium complexes were probed with CO, the resulting IR spectra demonstrated the formation of Ir(CO)₂ complexes on the MgO surface. The breadth of the ν_CO bands demonstrates a substantial variation in the metal–support bonding, consistent with the heterogeneity of the MgO surface; the STEM images are not sufficient to characterize this heterogeneity. The supported iridium complexes catalyzed ethene hydrogenation at room temperature and atmospheric pressure in a flow reactor, and EXAFS spectra indicated that the mononuclear iridium species remained intact. STEM images of the used catalyst confirmed that almost all of the iridium complexes remained intact, but this method was sensitive enough to detect a small degree of aggregation of the iridium on the support.     

Characterization of Heat Treated Titanium-Based Implants by Nondestructive Eddy Current and Ultrasonic Tests

This study presents nondestructive characterization of microstructure and mechanical properties of heat treated Ti, Ti-Cu, and Ti-6Al-4V titanium-based alloys and 17-4 PH stainless steel alloy for biomedical implant applications. Ti, Ti-Cu, and 17-4 PH stainless steel based implants were produced by powder metallurgy. Ti-6Al-4V alloy was investigated as bulk wrought specimens. Effects of sintering temperature, aging, and grain size on mechanical properties were investigated by nondestructive and destructive tests comparatively. Ultrasonic velocity in specimens was measured by using pulse-echo and transmission methods. Electrical conductivity of specimens was determined by eddy current tests. Determination of Young’s modulus and strength is important in biomedical implants. Young’s modulus of specimens was calculated by using ultrasonic velocities. Calculated Young’s modulus values were compared and correlated with experimental values.     

The effects of different greenhouse covering materials on energy requirement,growth and yield of aubergine

Effects of UV stabilised polyethylene (UV+PE), IR absorbers polyethylene (IR+PE), double layers of polyethylene (D-Poly) and single layer of polyethylene (PE), as greenhouse covers, on aubergine growth, productivity and energy requirement were investigated in a late autumn season (2001). The late and final yields of plants grown in D-Poly houses were higher than those grown in UV+PE, IR+PE and PE. Light transmission was the highest in PE, intermediate in UV+PE and IR+PE, and the lowest in D-Poly houses. Relative humidity was the highest in D-Poly, intermediate in IR+PE and UV+PE, and the lowest in PE houses. The plants in D-Poly houses grew and developed faster (more leaves and flowers) than those in IR+PE, UV+PE and PE houses. Plant growth and development in UV+PE and IR+PE houses was similar. Economic analyses showed that aubergine production was economically viable in D-Poly, UV+PE and IR+PE houses. For aubergine production in climatic conditions similar to Black Sea Region, the D-Poly greenhouse is strongly recommended, because there was a higher productivity and a lower heating requirement in comparison to UV+PE, IR+PE and PE houses.