Phase formation and microstructure of Nd<Superscript>+3</Superscript> doped Pb(Mg<Subscript>1/3</Subscript>Nb<Subscript>2/3</Subscript>)O<Subscript>3</Subscript> prepared by sol–gel method

The aim of this study was to investigate the effects of the rare earth element neodymium on the phase formation and microstructural development of relaxor ferroelectric lead magnesium niobate, Pb(Mg_1/3Nb_2/3)O₃ (PMN) system. Perovskite phase PMN powders were prepared using the sol–gel method and the effect of neodymium doping was investigated at different doping levels ranging from 0.1 mol% to 30 mol%. The precursors employed in the sol–gel process were lead (II) acetate, magnesium ethoxide, and niobium (V) ethoxide. All the experiments were performed at room temperature while the calcination temperatures ranged between 800 °C and 1,100 °C. Results showed that it was possible to obtain the pure perovskite phase at 950 °C using the sol–gel method. Nd⁺³ addition influenced the phase formation and microstructure of the multicomponent system. Pyrochlore was detected along with the perovskite phase above 10 mol% Nd. Results also demonstrated that grain size of the synthesized powders depended on the Nd⁺³ concentration.     

The effect of granulocyte colony-stimulating factor (G-CSF) on bacterial translocation in the splenectomized rat

BACKGROUND/AIMS: We created a study group in order to investigate the effects of splenectomy and filgrastim. Filgrastim is an immunomodulator granulocyte colony-stimulating factor (G-CSF), that affects bacterial translocation. MATERIALS AND METHODS: We created 3 study groups with 30 male Sprague-Dawley rats; the first group included sham splenectomy, the second group was splenectomy, and the third group was splenectomy+ filgrastim group. RESULTS: The mean bacterial colony count of the cecum were 2.5 x 10(9) in group 1, 1.2 x 10(10) in group 2 and 3.5 x 10(9) in group 3. The differences between these groups were accepted as statistically significant. The mean counts of the terminal ileum were 1.1 x 10(9) in group 1, 5.5 x 10(10) in group 2 and 2.5 x 10(10) in group 3. The p values of group 1-2 were 0.036 (statistically significant) and 0.123 in groups 2-3) were not statistically significant. The mean counts of the liver were 0.2 x 10(4), 1 x 10(10) and 3.4 x 10(5), respectively. In comparison of the groups the p values of the first and last 2 groups were found to be 0.047 (statistically significant). The mean counts of the mesenteric lymph node were 0.7 x 10(3), 1 x 10(10) and 0.9 x 10(6) respectively. The p values were 0.343 for the first and the last 2 groups both. As they were above 0.05, they were not statistically significant. The degrees of liver Kupffer cell hyperplasia were (+) 40%, (+2) 50% and (+3) 10% (group 1), (+) 10%, (+2) 40% and (+3) 50% (group 2), (+2) 60% and (+3) 40% (group 3) (p = 0.0039). The rates of the absence of pathology in mesenteric lymph nodes were 70% (group 1), 90% (group 2) and 100% (group 3) (p = 0.049). These findings were statistically significant. CONCLUSIONS: We found that splenectomy has activated the whole predisposing factors of bacterial translocation and created the latter itself. In addition, we showed that filgrastim, a recently widespread used G-CSF, decreases bacterial translocation significantly.     

Deep long short-term memory networks-based automatic recognition of six different digital modulation types under varying noise conditions

Neural Computing and Applications - In this paper, a new method based on deep learning has been proposed in order to recognize noise-digital modulation signals at varying noise levels...     

Diffraction of acoustic waves by a semi-infinite cylindrical impedance pipe of certain wall thickness

An asymptotic high-frequency solution is presented for the problem of diffraction of acoustic waves emanating from a ring source by a semi-infinite cylindrical pipe of certain wall thickness having different internal, external and end surface impedances. Through the application of the Fourier-transform technique in conjunction with the Mode Matching method, the diffraction problem is described by a modified Wiener–Hopf equation of the second kind and then solved approximately. Various numerical results illustrating the effects of the parameters of the problem on the diffraction phenomenon are presented.     

Three—body collisions involving Na（3P）,Rb（5S） and buffer gas atoms

Energy pooling in the Na-Rb vapor mixture has been investigated.While some kind of buffer gas is introduced into the cell the peculiar features appear.The buffer gas enhances the energy transfer betwwen Na(3P) and Rb(5S),which can be detected through the effects induced on the highly excited states populated by the Na(3P)/Rb(5P) and Rb(5P)/Rb(5P) collisions.     

Mapping classifiers and datasets

Given the posterior probability estimates of 14 classifiers on 38 datasets, we plot two-dimensional maps of classifiers and datasets using principal component analysis (PCA) and Isomap. The similarity between classifiers indicate correlation (or diversity) between them and can be used in deciding whether to include both in an ensemble. Similarly, datasets which are too similar need not both be used in a general comparison experiment. The results show that (i) most of the datasets (approximately two third) we used are similar to each other, (ii) multilayer perceptrons and k-nearest neighbor variants are more similar to each other than support vector machine and decision tree variants, (iii) the number of classes and the sample size has an effect on similarity.     

HEAT AND MASS TRANSFER IN IMPINGEMENT DRYING

ABSTRACT

In industrial drying applications, efficient transfer of heat and mass between a drying medium and the material being dried is very critical for the overall economics of the operation. Impinging jets are therefore widely used for their enhanced tmnsport characteristics, especially for drying of continuous sheets of materials such as paper and textiles. In such applications, a thin sheet of material, as wide as 6m in cross machine direction, speeds at velocities as high as 90 km/hr under high velocity jets emerging from a confining surface parallel to the material surface. Many variables and effects need to k considered for proper design of such impinging jet systems: nozzle geometry and size, nozzle configuration, location of exhaust pons, nozzle-to-surface separation, jet-to-jet separation, cross flow, jet exit velocity and surface motion. For permeable materials, additional enhancement of heat and mass transfer that occur when some of the impinging gas is removed through the material makes this option an atmctive one.

Here, we review the above effects and offer predictive correlations from literature which may be used in the design of high velocity impinging jet systems.     

Synthesis,characterization and cytotoxicity of novel modified poly[(maleic anhydride)‐ co‐(vinyl acetate)]/noradrenaline conjugate

Poly[(maleic anhydride)‐co‐(vinyl acetate)] (MAVA) copolymer was synthesized by free radical polymerization reaction, in methyl ethyl ketone at 80 °C, using benzoyl peroxide as the initiator. The copolymer was then modified with a biomolecule, noradrenaline (NA). The modification reaction was performed at 70 °C in dimethylformamide containing triethylamine as the catalyst. The modified polymer was named MAVA/NA. Structural characterization of the copolymer and the modified product was carried out by Fourier transform infrared (FTIR) and ¹H NMR and ¹³C NMR spectroscopy. The FTIR, ¹H NMR and ¹³C NMR spectra confirmed that NA was successfully covalently bound to the MAVA copolymer backbone. Surface morphology was visualized by atomic force microscopy. The cumulative release of NA from MAVA/NA was determined in phosphate buffered saline solution for 7 days at 37 °C and compared with MAVA. Cytotoxicity of the MAVA/NA was evaluated by using a mouse fibroblast cell line (L929). Results obtained indicated that MAVA/NA had almost no toxicity and no negative effect on cell viability at 250 µg mL^?1 concentration. © 2012 Society of Chemical Industry     

Modification of maleic anhydride–styrene copolymer with noradrenaline by chemical and enzymatic methods

Maleic anhydride copolymer was modified with another biologically active agent, noradrenaline (NA), using both chemical and enzymatic methods. The modification and synthesized products were named as follows: chemical modification, MASTNAc; enzymatic modification, MASTNAe; enzymatically synthesized MASTNA from individual monomers, MASTNAem. Chemical and enzymatic reactions were performed at 70°C and 38°C, respectively. In the chemical reactions azobisisobutyronitrile was used as the initiator. In the enzymatic reactions, an extracellular extract, including an enzyme with peroxidase‐like activity, was used. All the reactions were performed in an organic medium, methyl ethyl ketone. Structural characterization of the copolymer and modified copolymer were carried out by Fourier transform infrared (FTIR) and nuclear magnetic resonance (¹H NMR). FTIR and ¹H NMR spectra confirmed that NA was successfully covalently bound onto the MAST copolymer backbone by both chemical and enzymatic methods. Surface morphology of the samples was studied by scanning electron microscopy. Results obtained indicated that chemical and enzymatic addition of NA to MAST backbone yielded products having quite similar physical and chemical properties. On the other hand, MASTNA‐modified copolymer synthesized by individual monomers appeared to be different in its chemical structure. Furthermore, enzymatic modification and synthesis appeared to provide a good alternative method because it required much milder conditions such as low temperature, and better product qualities: higher solubility in water, higher yield and purity. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011