Electrochemical properties of composite materials based on graphite and vanadium disilicide

Electrodes with different composition were prepared by the method of pressing followed by sintering of the graphite and vanadium disilicide powders, and their electrochemical and corrosion properties in water solutions of electrolytes were studied.Translated from Inzhenerno-Fizicheskii Zhuraal, Vol. 52, No. 5, pp. 802–707, May, 1987.     

High-temperature sensible-heat storage options

Alkali-metal carbonate salts meet the requirements for high-temperature solar central receiver systems, but because of their corrosiveness they present special problems in the design of storage tanks. In order to reduce corrosion and temperature sufficiently to retain strength in the storage containing wall, internal and thermal insulation is required. We present design options and operation criteria for sensible-heat, molten-salt storage with internal insulation.     

Pattern Effect Removal Technique for Semiconductor-Optical-Amplifier-Based Wavelength Conversion

A technique to overcome pattern dependence in semiconductor-optical-amplifier-based wavelength converters is presented. The technique is based on a careful selection of red- and blue-shifted spectral components having complementary pattern effects in the output spectrum of a wavelength-converted signal. Significant signal quality improvements are reported at a bit rate of 40 Gb/s.     

Phase equilibria in the system Al-Rh

Methods of differential thermal analysis, x-ray diffraction, microstructural analysis and electron probe microanalysis are used to study alloys of the Al-Rh system over the whole concentration range. It is established that the phase of equiatomic composition AlRh melts congruently at 2060°C and it has an extended range of homogeneity (45.1–54.2 at.% Rh). The solubility of aluminum in rhodium reaches 9 at.%, decreasing to 6 at.% at 850°C. Coordinates are determined for the eutectic point l ⇆ AlRh + 〈Rh〉 as 70 at.% Rh and 1715°C. The existence of intermediate phases, their crystal structure, and also the method of forming phases in the field of composition rich in aluminum given in publications are confirmed. __________ Translated from Poroshkovaya Metallurgiya, Nos. 5–6(449), pp. 48–56, May–June, 2006.     

Use of a 5-caffeoylquinic Acid/Caffeine Ratio to Monitor the Coffee Roasting Process

The extent of alteration in the chemical composition of coffee beans roasted to develop the flavor and aroma associated with coffee beverage was reliably monitored by observing the decomposition of naturally occurring 5-caffeoylquinic acid (5-CQA) and ratioing this concentration to that of the relatively heat stable caffeine. An HPLC method was developed by which simultaneous quantification of 5-CQA and caffeine could be used to monitor degree of roast.     

PROBABILISTIC MODELLING OF LIGNIN LIQUEFACTION

The results of the thermal and catalytic reactions of lignin model compounds are used in the a priori prediction of its liquefaction. Lignin was defined probabilistically as an ensemble of single ring aromatics with substituents on each of their six ring positions. Elements in a substituent vector x¹, for each ring position i, were matched into all possible combinations to describe lignin. Initial number fractions, or probabilities, for each vector element were ascertained through inspection of lignin structural data. The reaction of lignins altered the probabilities within each substituent vector, and reaction products were also calculated by matching all combinations of vector elements for each ring position. Model compound results provided the identities and rates of change of vector elements.

This simulation of lignin liquefaction predicted the yields of permanent gases, aqueous liquids, single- and two-ring phenolic products, and a carbonaceous residue. The impact of the distribution of oligomeric sizes on catalyst effectiveness was probed.     

Analysis of conduction heat transfer problems in steady, 2D regions with circular holes using a special boundary integral method

A special boundary integral method developed for two-dimensional regions containing circular holes is used to calculate temperature and heat transfer on the boundaries of several selected regions. The geometrical configuration of the region is arbitrary and convective boundary conditions are assumed. An important feature of the method is analytic representation of temperature and its normal derivative on the interior circular holes in the form of a harmonic series. This makes the application of the boundary integral method convenient and free from conditioning problems associated with small interior boundaries. Heat transfer from circular isothermal interior holes are calculated for several illustrative examples using three terms of the harmonic series representation for heat transfer at each of the circular boundaries. The results are presented and discussed.     

Characterization of an ASIC for CPG sensors with grid-only depth of interaction sensing

A new version of the front-end application specific integrated circuit (ASIC) for co-planar-grid (CPG) sensors is presented. Compared to the first version, the ASIC is optimized for signal/noise performance, modified in peaking time, and it implements timing signals to measure the depth of interaction using the grids signals only. Experimental results using state-of the-art CPG sensors and different approaches for reducing the error due to electron trapping are reported. A new technique that makes use of the sum and difference of the grids signals is also presented.