Mesostructured mixed Mo–V–Nb oxides for propane ammoxidation

Mesostructured Mo–V–Nb mixed oxide phases were prepared by reacting inorganic precursors in the presence of cationic, anionic and alkylamine surfactants. The occurrence of these mesostructured phases was explained in part by charge-matching considerations at the inorganic–organic interface. Other interactions, such as covalent bonding between the surfactant headgroup and metal atoms, could direct the self-assembly process. Despite of the limited thermal stability of the mesophases, the air-calcined phases were catalytically active and selective for propane ammoxidation to acrylonitrile and acetonitrile. The selectivities to acrylonitrile and acetonitrile were as high as 26 and 49 mol%, respectively, at 66% propane conversion.     

Modelling of anodic dissolution of pure aluminium in sodium chloride

A mathematical model for simulating a passive aluminium (Al) surface with a pit in which active electrochemical metal dissolution occurs has been developed. The model includes hydrolysis products of Al and the species obtained as a result of homogeneous reactions between chloride and Al³⁺ ions and Al hydrolysis products. The model does not assume the equilibrium state in solution: all terms in homogeneous reactions are treated explicitly using kinetic constants taken from the literature. The validity of assuming reaction equilibrium has been addressed. Solution potential values and species concentrations are predicted for different dissolution current densities. The acidity in the pit is explained by the hydrolysis of Al³⁺; an analytical expression for the pH values at the pit bottom for a given dissolution current density is presented.The model is applied to a real capillary geometry used in electrochemical microcell experiments. It was found that for r_cap/r_pit < 100, where r_cap and r_pit are the capillary end and pit radii, respectively, the insulating capillary wall affects the species concentrations and the solution potential. Moreover, for r_cap/r_pit < 20, the shape of the capillary, which might not be cylindrical, should be taken into account.     

Pore bifurcation, growth and pore termination in nanoporous alumina with concave and convex surfaces

The growth of nanoporous alumina on concave or convex aluminium surfaces has been investigated. The number of pores during anodic oxidation increases or decreases almost linearly with the thickness of the oxide which is due to bifurcation or termination of single pores during alumina growth. The anodic oxidation has been constantly conducted in oxalic acid at 40 V. Therefore the average interpore distance has not changed during alumina growth. In earlier papers it has been shown that a bifurcation of pores is the result of the change of voltage and the electrolyte. In this work we have demonstrated that a termination or a bifurcation of pores is also possible by structuring the aluminium to a curved surface with concave or convex properties before oxidation. Those results do not depend on the substrate characteristics or on the alumina preparation techniques.     

Isolation, solubility and in vitro hydrolysis of chickpea vicilin-like protein

The chickpea vicilin-like globulin was isolated and chromatographed on Sepharose CL-6B and Sephacryl S-300. The native globulin with a molecular weight of 140 kDa was resolved in Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) in seven polypeptide bands in the range of 12.4-67 kDa. The solubility profile of the protein in water and NaCl solutions was typical of a legume globulin. The purified vicilin-like globulin, native and heated, was hydrolyzed by pepsin, trypsin and chymotrypsin. The hydrolysis patterns indicated that the native vicilin-like protein was only partially degraded by the enzymes in comparison with casein. Heating increased its susceptibility to hydrolysis relative to the native form, for all the enzymes. However, the results obtained by the pH-drop method revealed that the in vitro digestibility of the vicilin-like protein was not altered by heating, while 11S-like and total globulins suffered a small increase, indicating that the structural characteristics of storage globulins may be important factors limiting the protein digestion.     

Effect of the Phase Composition of Barium-Calcium Alumoscandates on the Emission Properties of Impregnated Cathodes

The effect of scandium oxide additions on the emission properties of impregnated tungsten cathodes was investigated. The synthesis of alumoscandates in the BaO ― CaO ― Sc₂O₃ ― Al₂O₃ system were studied by x-ray diffraction, thermography, and petrographic analysis. The hygroscopic properties of the emission-active material was determined. Based on the results of emission tests the recommended optimal compositions of emission-active material are 2.4 BaO·0.6 CaO·0.1 Sc₂O₃·0.9 Al₂O₃ and 2.6 BaO·1.9 CaO·0.1 Sc₂O₃·0.9 Al₂O₃. Cathodes based on these compositions had lifetimes greater than 10000 h operating in the temperature range 900-1000°C at current densities of 15-20 A/cm² in a vacuum of the order of 10⁻⁶ Torr.

     

InP based semiconductor structures for radiation detection

We report the preparation of semi-insulating InP single crystals of p-type conductivity and intentionally undoped p-type epitaxial layers for radiation detection. We focus on (i) the growth of InP single crystals doped with copper by the Czochralski technique and their subsequent temperature annealing to convert them to a semi-insulating (SI) state of p-type conductivity, and (ii) the growth of thick (>10 μm) p-type InP layers by liquid phase epitaxy with an admixture of Pr and Dy. Grown layers and single crystals were examined by low-temperature photoluminescence spectroscopy, capacitance-voltage and temperature dependent Hall measurements. An efficient purification due to rare earth (RE) admixture has been observed and layers grown with the addition of Pr and Dy exhibit the change of electrical conductivity from n to p at certain RE concentration in the melt. Dominant acceptors responsible for conductivity conversion have been identified. Three types of detection structures exploiting the Schottky or Schottky like contacts on pure and SI p-type InP or exploiting the p–n junction were designed.     

Determination of flavonoids in a Citrus fruit extract by LC–DAD and LC–MS

Flavonoids are a group of polyphenolic compounds with health-related properties. Citrus fruits are rich in flavonoids and their extracts are being used as functional ingredients for several industrial products. A new high performance liquid chromatography technique with an UV photodiode-array detector was used to analyze flavonoids of an extract of Citrus species. To our knowledge this is the first study that reports isoquercitrin presence at a level of 77.3 mg/100 g in a sample made of Citrus fruits; four other flavonoids were quantified as rutin (326.59 mg/100 g), naringin (338.36 mg/100 g), quercetin (96.35 mg/100 g) and naringenin (2.35 mg/100 g). Identification was confirmed by a liquid chromatography mass spectrometer system. Method validation was achieved, providing an analytical technique that can be used to detect trace amounts of these compounds in Citrus extracts with an extremely rapid sample preparation.     

Mitigation technologies and measures in the energy sector of Kazakstan

An important commitment in the UN Framework Convention on Climate Change is to conduct mitigation analysis and to communicate climate change measures and polices. In major part reducing CO₂ as well as the other greenhouse gas emissions in Kazakstan can be a side-product of measures addressed to increasing energy efficiency. Since such measures are very important for the national economy, mitigation strategies in the energy sector of Kazakstan are directly connected with the general national strategy of the energy sector development. This paper outlines the main measures and technologies in energy sector of Kazakstan which can lead to GHG emissions reduction and presents the results of current mitigation assessment.

The mitigation analysis addressed to energy production sector. A baseline and six mitigation scenarios were developed to evaluate the most attractive mitigation options, focusing on specific technologies which have been already included in sustainable energy programs. According to the baseline projection, Kazakstan's CO₂ emissions will not exceed their 1990 level until 2005. The potential for CO₂ emission reduction is estimated to be about 11% of the baseline emission level by the end of considered period (in 2020). The main mitigation options in the energy production sector in terms of mitigation potential and technical and economical feasibility include rehabilitation of thermal power plants aimed to increasing efficiency, use of nuclear energy, and further expansion in the use of hydro energy based on small hydroelectric power plants.