Manipulation of matter by electric and magnetic fields: Toward novel synthesis and processing routes of inorganic materials

The use of external electric and magnetic fields for the synthesis and processing of inorganic materials such as metals and ceramics has seen renewed interest in recent years. Electromagnetic energy can be utilized in different ways to improve or accelerate phase formation and stabilization, chemical ordering, densification and coarsening of particle-based materials (pore elimination and grain growth), and mechanical deformation (plasticity and creep). In these new synthesis and processing routes, the resulting microstructures and macroscopic material behavior are determined by the interaction of the applied fields with defects such as single or clustered point defects, dislocation networks, and interfaces. Multiscale experimental investigations and modeling are necessary to unveil the mechanisms underlying this field-assisted manipulation of matter.     

The role of microcrystalline structure on optical scattering characteristics of semi-crystalline thermoplastics and the accuracy of numerical input for IR-heating modeling

Infrared (IR) heating is widely used for thermoforming of thermoplastic polymers. The key benefit of radiation heating is that a significant amount of the radiative energy penetrates into the polymers thanks to their semi-transparency. For the case of heating unfilled semi-crystalline polymers, the relation between their microcrystalline structure and optical properties is the key to develop a predictive IR-heating model as microcrystalline structure introduces an optically heterogeneous medium. In this study, a relation between the microcrystalline structure of a polyethylene (PE) and its effect on the thermo-optical properties was experimentally analyzed considering a two-step analysis. At very first step, the relation was analyzed considering samples with identical thicknesses and different morphologies, characterized here in terms of degree of crystallinity (X_c (%)). Using Fourier Transform Infrared (FT-IR) spectroscopy and integrating sphere, optical characteristics of the PE samples were analyzed in near-infrared (NIR) and middle-infrared (MIR) spectral ranges. The analyses showed that a slight variation in X_c (%) has a great effect on the optical characteristics of PE, particularly the transmission characteristics in NIR range. The wavelength-dependent effect of X_c (%) on the transmission behaviors opened a discussion about the fact that the microcrystalline structures -in particular spherulites or their substructures such as lamellae- are responsible for optical scattering. Using the optical properties obtained from the two-step experimental analyses, two different thermo-optical properties were calculated, namely extinction and absorption coefficients, and used as a numerical input for the parametric numerical studies. The numerical studies were performed using an in-house developed radiation heat transfer algorithm -RAYHEAT-. Both the experimental and numerical analyses demonstrated the importance of the optical scattering regarding the identification of thermo-optical properties, used as a numerical input for radiation heat transfer models.     

Nanocrystalline Nd–Fe–B Anisotropic Magnets by Flash Spark Plasma Sintering

Flash spark plasma sintering (flash SPS) is an attractive method to obtain Nd–Fe–B magnets with anisotropic magnetic properties when starting from melt-spun powders. Compared to the benchmark processing route via hot pressing with subsequent die upsetting, flash SPS promises electroplasticity as an additional deformation mechanism and reduced tool wear, while maximizing magnetic properties by tailoring the microstructure—fully dense and high texture. A detailed parameter study is conducted to understand the influence of Flash SPS parameters on the densification and magnetic properties of commercial MQU-F powder. It is revealed that the presintering conditions and preheating temperature before applying the power pulse play a major role for tailoring grain size and texture in the case of hot deformation via Flash SPS. Detailed microstructure and magnetic domain evaluation disclose the texture enhancement with increasing flash SPS temperature at the expense of coercivity. The best compromise between remanence and coercivity (1.37 T and 1195 kA m⁻¹, respectively) is achieved through a combination of presintering at 500 °C for 120 s and preheating temperature of 600 °C, resulting in a magnet with energy product (BH)_max of 350 kJm⁻³. These findings show the potential of flash SPS to obtain fully dense anisotropic nanocrystalline magnets with high magnetic performance.     

A Perspective on Emerging and Future Sintering Technologies of Ceramic Materials

Novel sintering methods have emerged in the recent past years, which have raised great interest in the scientific community. Relying on electric field effects, high heating rates, the use of mechanical pressure, or hydrothermal conditions, they offer fundamental advantages compared to conventional sintering routes like minimizing the energy consumption and enhancing the process efficiency. This perspective aims at explaining these effects in a general way and presenting the status quo of using them for the processing of high-performing ceramic materials. In detail, this work focuses on flash sintering, ultrafast high-temperature sintering, spark plasma sintering, cold sintering, and photonic sintering methods based on different light sources. The specificities, potentials, and limitations of each method are compared, especially in the light of a possible industrialization.     

Analytic investigation of frequency sensitivity in microwave oscillators: Application to the computation of phase noise in a dielectric resonator oscillator

The conversion of low frequency noise into phase noise in microwave oscillators is studied through an analytical calculation of the pushing factor. This calculation is based on a simplified equivalent circuit for two types of active devices : field effect transistors (Fet) and heterojunction bipolar transistors (hbt). The preeminence in the conversion process of the gate- source capacitance in theFet and the base- emitter junction in thehbt is pointed out. Practical methods are proposed to reduce the phase noise in these circuits.     

Motion of points and lines in the uncalibrated case

In the present paper we address the problem of computing structure and motion, given a set point and/or line correspondences, in a monocular image sequence, when the camera is not calibrated.Considering point correspondences first, we analyse how to parameterize the retinal correspondences, in function of the chosen geometry: Euclidean, affine or projective geometry. The simplest of these parameterizations is called the FQs-representation and is a composite projective representation. The main result is that considering N+1 views in such a monocular image sequence, the retinal correspondences are parameterized by 11 N–4 parameters in the general projective case. Moreover, 3 other parameters are required to work in the affine case and 5 additional parameters in the Euclidean case. These 8 parameters are calibration parameters and must be calculated considering at least 8 external informations or constraints. The method being constructive, all these representations are made explicit.Then, considering line correspondences, we show how the the same parameterizations can be used when we analyse the motion of lines, in the uncalibrated case. The case of three views is extensively studied and a geometrical interpretation is proposed, introducing the notion of trifocal geometry which generalizes the well known epipolar geometry. It is also discussed how to introduce line correspondences, in a framework based on point correspondences, using the same equations.Finally, considering the F Qs-representation, one implementation is proposed as a motion module, taking retinal correspondences as input, and providing and estimation of the 11 N–4 retinal motion parameters. As discussed in this paper, this module can also estimate the 3D depth of the points up to an affine and projective transformation, defined by the 8 parameters identified in the first section. Experimental results are provided.     

An improved algorithm for disaggregating microwave-derived soil moisture based on red, near-infrared and thermal-infrared data

Accurate high-resolution soil moisture data are needed for a range of agricultural and hydrologic activities. To improve the spatial resolution of ∼ 40 km resolution passive microwave-derived soil moisture, a methodology based on 1 km resolution MODIS (MODerate resolution Imaging Spectroradiometer) red, near-infrared and thermal-infrared data has been implemented at 4 km resolution. The three components of that method are (i) fractional vegetation cover, (ii) soil evaporative efficiency (defined as the ratio of actual to potential evaporation) and (iii) a downscaling relationship. In this paper, 36 different disaggregation algorithms are built from 3 fractional vegetation cover formulations, 3 soil evaporative efficiency models, and 4 downscaling relationships. All algorithms differ with regard to the representation of the nonlinear relationship between microwave-derived soil moisture and optical-derived soil evaporative efficiency. Airborne L-band data collected over an Australian agricultural area are used to both generate ∼ 40 km resolution microwave pixels and verify disaggregation results at 4 km resolution. Among the 36 disaggregation algorithms, one is identified as being more robust (insensitive to soil, vegetation and atmospheric variables) than the others with a mean slope between MODIS-disaggregated and L-band derived soil moisture of 0.94. The robustness of that algorithm is notably assessed by comparing the disaggregation results obtained using composited (averaged) Terra and Aqua MODIS data, and using data from Terra and Aqua separately. The error on disaggregated soil moisture is systematically reduced by compositing daily Terra and Aqua data with an error of 0.012 vol./vol.     

A survey on fraud and service misuse in voice over IP (VoIP) networks

The migration from circuit-switched networks to packet-switched networks necessitates the investigation of related issues such as service delivery, QoS, security, and service fraud and misuse. The latter can be seen as a combination of accounting and security aspects. In traditional telecommunication networks, fraud accounts for annual losses at an average of 3%–5% of the operators’ revenue and still increasing at a rate of more than 10% yearly. It is also expected that in VoIP networks, the situation will be worse due to the lack of strong built-in security mechanisms, and the use of open standards. This paper discusses the fraud problem in VoIP networks and evaluates the related available solutions.     

Deliberate word access: an intuition,a roadmap and some preliminary empirical results

No doubt, words play a major role in language production, hence finding them is of vital importance, be it for writing or for speaking (spontaneous discourse production, simultaneous translation). Words are stored in a dictionary, and the general belief holds, the more entries the better. Yet, to be truly useful the resource should contain not only many entries and a lot of information concerning each one of them, but also adequate navigational means to reveal the stored information. Information access depends crucially on the organization of the data (words) and the access keys (meaning/form), two factors largely overlooked. We will present here some ideas of how an existing electronic dictionary could be enhanced to support a speaker/writer to find the word s/he is looking for. To this end we suggest to add to an existing electronic dictionary an index based on the notion of association, i.e. words co-occurring in a well balanced corpus, the latter being supposed to represent the average citizen’s knowledge of the world. Before describing our approach, we will briefly take a critical look at the work being done by colleagues working on automatic, spontaneous or deliberate language production,—that is, computer-generated language, simulation of the mental lexicon, or WordNet (WN),—to see how adequate they are with regard to our goal.