Fast-fading characterisation in urban mobile propagation at 855 MHz in Paris

Field trials in Paris at 855 MHz were used to show that fast fading could be characterised with a 1 m sampling step: the normalised field strength is first shown to be highly uncorrelated between two data points and then its statistical distribution is found to be well fitted by a Rayleigh law.     

Using pore space 3D geometrical modelling to simulate biological activity: Impact of soil structure

This study is the follow-up to a previous one devoted to soil pore space modelling. In the previous study, we proposed algorithms to represent soil pore space by means of optimal piecewise approximation using simple 3D geometrical primitives: balls, cylinders, cones, etc. In the present study, we use the ball-based piecewise approximation to simulate biological activity. The basic idea for modelling pore space consists in representing pore space using a minimal set of maximal balls (Delaunay spheres) recovering the shape skeleton. In this representation, each ball is considered as a maximal local cavity corresponding to the “intuitive” notion of a pore as described in the literature. The space segmentation induced by the network of balls (pores) is then used to spatialise biological dynamics. Organic matter and microbial decomposers are distributed within the balls (pores). A valuated graph representing the pore network, organic matter and microorganism distribution is then defined. Microbial soil organic matter decomposition is simulated by updating this valuated graph. The method has been implemented and tested on real data. As far as we know, this approach is the first one to formally link pore space geometry and biological dynamics. The long-term goal is to define geometrical typologies of pore space shape that can be attached to specific biological dynamic properties. This paper is a first attempt to achieve this goal.     

The grain-boundary resistance of CeO2 ceramics: A combined microscopy-spectroscopy-simulation study of a dilute solution

Weakly acceptor-doped ceria ceramics were characterized structurally and compositionally with advanced transmission electron microscopy (TEM) techniques and electrically with electrochemical impedance spectroscopy (EIS). The grain boundaries studied with TEM were found to be free of second phases. The impedance spectra, acquired in the range 703 ≤ T/K ≤ 893 in air, showed several arcs that were analyzed in terms of bulk, grain-boundary, and electrode responses. We ascribed the grain-boundary resistance to the presence of space-charge layers. Continuum-level simulations were used to calculate charge-carrier distributions (of acceptor cations, oxygen vacancies, and electrons) in these space-charge layers. The acceptor cations were assumed to be mobile at high (sintering) temperatures but immobile at the temperatures of the EIS measurements. Space-charge formation was assumed to be driven by the segregation of oxygen vacancies to the grain-boundary core. Comparisons of data from the simulations and from the EIS measurements yielded space-charge potentials and the segregation energy of vacancies to the grain-boundary core. The space-charge potentials from the simulations are compared with values obtained by applying the standard, analytical (Mott–Schottky and Gouy–Chapman) expressions. The importance of modelling space-charge layers from the thermodynamic level is demonstrated.     

Structural and Functional Characterization of 4-Hydroxyphenylacetate 3-Hydroxylase from Escherichia coli

The hydroxylation of phenols into polyphenols, which are valuable chemicals and pharmaceutical products, is a challenging reaction. The search for green synthetic processes has led to considering microorganisms and pure hydroxylases as catalysts for phenol hydroxylation. Herein, we report the structural and functional characterization of the flavin adenine dinucleotide (FAD)-dependent 4-hydroxyphenylacetate 3-monooxygenase from Escherichia coli, named HpaB. It is shown that this enzyme enjoys a relatively broad substrate specificity, which allows the conversion of a number of non-natural phenolic compounds, such as tyrosol, hydroxymandelic acid, coumaric acid, hydroxybenzoic acid and its methyl ester, and phenol, into the corresponding catechols. The reaction can be performed by using a simple chemical assay based on formate as the electron donor and the organometallic complex [Rh(bpy)Cp*(H₂O)]²⁺ (Cp*: 1,2,3,4,5-pentamethylcyclopentadiene, bpy: 2,2′-bipyridyl) as the catalyst for FAD reduction. The availability of a crystal structure of HpaB in complex with FAD at 1.8 Å resolution opens up the possibility of the rational tuning of the substrate specificity and activity of this interesting class of phenol hydroxylases.     

Formation of the Perovskite Phase in the PbMg1/3Nb2/3O3─PbTiO3 System

The reaction sequences during calcination of oxide mixtures were studied for the PbMg_1/3Nb_2/3O₃─PbTiO₃ (PMN-PT) system. The effect of reactivity and composition of the starting mixtures was investigated. In the present study, a B-site-deficient, cubic pyrochlore phase in the PbO-Nb₂O₅ system was formed at 500°C. The perovskite phase of PMN was formed at 7007deg;C through the diffusion of MgO into the pyrochlore phase. The lattice parameter of the pyrochlore phase decreased as this transformation to perovskite progressed.     

Iron-catalyzed oxidation of arsenic(III) by oxygen and by hydrogen peroxide: pH-dependent formation of oxidants in the Fenton reaction

The oxidation kinetics of As(III) with natural and technical oxidants is still notwell understood, despite its importance in understanding the behavior of arsenic in the environment and in arsenic removal procedures. We have studied the oxidation of 6.6 microM As(II) by dissolved oxygen and hydrogen peroxide in the presence of Fe(II,III) at pH 3.5-7.5, on a time scale of hours. As(III) was not measurably oxidized by O2, 20-100 microM H2O2, dissolved Fe(III), or iron(III) (hydr)-oxides as single oxidants, respectively. In contrast, As(III) was partially or completely oxidized in parallel to the oxidation of 20-90 microM Fe(II) by oxygen and by 20 microM H2O2 in aerated solutions. Addition of 2-propanol as an *OH-radical scavenger quenched the As(III) oxidation at low pH but had little effect at neutral pH. High bicarbonate concentrations (100 mM) lead to increased oxidation of As-(III). On the basis of these results, a reaction scheme is proposed in which H2O2 and Fe(II) form *OH radicals at low pH but a different oxidant, possibly an Fe(IV) species, at higher pH. With bicarbonate present, carbonate radicals might also be produced. The oxidant formed at neutral pH oxidizes As(III) and Fe(II) but does not react competitively with 2-propanol. Kinetic modeling of all data simultaneously explains the results quantitatively and provides estimates for reaction rate constants. The observation that As(III) is oxidized in parallel to the oxidation of Fe(II) by O2 and by H2O2 and that the As(III) oxidation is not inhibited by *OH-radical scavengers at neutral pH is significant for the understanding of arsenic redox reactions in the environment and in arsenic removal processes as well as for the understanding of Fenton reactions in general.     

Genetic diversity of Oenoccoccus oeni isolated from wines treated with phenolic extracts as antimicrobial agents

Molecular techniques have been applied to study the evolution of wine-associated lactic acid bacteria from red wines produced in the absence and presence of antimicrobial phenolic extracts, eucalyptus leaves and almond skins, and to genetically characterize representative Oenococcus oeni strains. Monitoring microbial populations by PCR-DGGE targeting the rpoB gene revealed that O. oeni was, as expected, the species responsible for malolactic fermentation (MLF). Representative strains from both extract-treated and not-treated wines were isolated and all were identified as O. oeni species, by 16S rRNA sequencing. Typing of isolated O. oeni strains based on the mutation of the rpoB gene suggested a more favorable adaptation of L strains (n = 63) than H strains (n = 3) to MLF. Moreover, PFGE analysis of the isolated O. oeni strains revealed 27 different genetic profiles, which indicates a rich biodiversity of indigenous O. oeni species in the winery. Finally, a higher number of genetic markers were shown in the genome of strains from control wines than strains from wines elaborated with phenolic extracts. These results provide a basis for further investigation of the molecular and evolutionary mechanisms leading to the prevalence of O. oeni in wines treated with polyphenols as inhibitor compounds.     

Identification of ritual blood in African artifacts using TOF-SIMS and synchrotron radiation microspectroscopies

A new protocol is implemented to demonstrate the presence of blood in the patina of African art objects from Mali. Divided into three steps, the protocol first consists in demonstrating the presence of proteins and localizing them in the sample's cross sections using time-of-flight secondary ion mass spectrometry (TOF-SIMS) and synchrotron-based infrared microspectrometry (microFT-IR). In a second time, TOF-SIMS is used to investigate heme, which is a blood marker. If heme is missing, which could mean that it is too degraded to be detected, X-ray microfluorescence (microXRF) and X-ray absorption near-edge microspectroscopy (microXANES) are used to prove the presence of iron in the protein area and to get a fingerprint of its chemical environment. This permits us thus to demonstrate that iron is indeed linked with proteins and not with mineral phases of the sample. Coupled with the ritual context of the objects, this constitutes a proof of the use of blood. Thanks to this protocol, which has the major advantage of avoiding false positive results, the presence of blood has been demonstrated in seven out of the eight studied samples.     

Sol–Gel Processing and Microwave Characteristics of Ba(Mg⅓Ta⅔)O3 Dielectrics

The sol–gel method has been developed for the preparation of pure Ba(Mg_1/3Ta_2/3)O₃ ceramics. This involves the reaction of the heterometallic alkoxide Ta₂Mg(OEt)₁₂ with hydrated barium hydroxide Ba(OH)₂·8H₂O. Complete crystallization of the sol–gel-derived powder is achieved at 600°C, leading to a cubic perovskite type phase. After sintering at 1400°C (2–5 h), a trigonal cell arises from Mg–Ta ordering (the degree of order is greater than 0.9), and about 98.5% of the theoretical density is obtained. Preliminary microwave dielectric measurements show that the dielectric constant and the unloaded Q _u of the ceramics are 24.2 and 6750, respectively, at 7.7 GHz.