BERRY SEEDS: A SOURCE OF SPECIALTY OILS WITH HIGH CONTENT OF BIOACTIVES AND NUTRITIONAL VALUE

Selected berry seed oils from blackberry, blueberry, cranberry, strawberry, red raspberry and kiwi were characterized for their quality and nutritional characteristics. These oils are by-products of berry juice production that have only recently gained commercial interest. Free fatty acid content was below 1.6% for all examined oil samples. Peroxide value ranged between 0.6 and 44 mg O₂/kg oil for blackberry and kiwi seed oils, respectively, and p -anisidine value varied from 6 in cranberry to 23 in strawberry. Linolenic acid content ranged from 17.53% in blackberry seed oil to 57.60% in kiwi seed oil. The oxidative stability of all oils was rather low (0.17 h for kiwi to 8.4 h for blackberry at 97.8C). Phytosterol contents ranged between 403 and 692 mg/100 g for blackberry and cranberry, respectively. The content of tocols (tocopherol  +  tocotrienol) varied from 34.4 for kiwi to 2,133 mg/kg for red raspberry seed oils.

PRACTICAL APPLICATIONS

A waste stream of fruit processing is used to extract the oil from berry seeds. Such oils are particularly rich in essential fatty acids (with a favorable low n-6/n-3 ratio) and antioxidants. They are incorporated in cosmetic preparations such as hand and body creams, and shampoos. Their composition is also interesting from a nutritional point of view. As the commercial interest is growing, chemical studies are necessary to elucidate the composition, activity and stability of different berry seed oils.     

Synthesis of nitrogen incorporated diamond-like carbon thin films using microwave surface-wave plasma CVD

Nitrogenated diamond-like (DLC:N) carbon thin films have been deposited by microwave surface wave plasma chemical vapor deposition on silicon and quartz substrates, using argon gas, camphor dissolved in ethyl alcohol composition and nitrogen as plasma source. The deposited DLC:N films were characterized for their chemical, optical, structural and electrical properties through X-ray photoelectron spectroscopy, UV/VIS/NIR spectroscopy, Raman spectroscopy, atomic force microscope and current–voltage characteristics. Optical band gap decreased (2.7 to 2.4 eV) with increasing Ar gas flow rate. The photovoltaic measurements of DLC:N / p-Si structure show that the open-circuit voltage (V_oc) of 168.8 mV and a short-circuit current density (J_sc) of 8.4 μA/cm² under light illumination (AM 1.5 100 mW/cm²). The energy conversion efficiency and fill factor were found to be 3.4 × 10^{− 4}% and 0.238 respectively.     

A model for the transverse strain response of unidirectional ceramic matrix composites during tensile testing

A comprehensive micromechanical model relating the longitudinal stress and transverse strain of unidirectional fibre toughened ceramic matrix composites (CMCs) is presented. The model uses different cylindrical unit-cells to describe the composite throughout a tensile test and considers all relevant damage mechanisms. The proposed model takes into account the Poisson contraction of fibre and matrix, the relief of thermal residual stresses upon damage development, and the build-up of compressive radial stresses at the interface due to mismatch between fibre and matrix after debonding and sliding. Thus the modelled transverse strain response depends on a wide range of microstructural and micromechanical parameters. The approach is checked by comparing the experimentally observed and simulated response of a unidirectional SiC/CAS composite of which all constituent properties were determined experimentally. The agreement between experiment and theory is excellent.     

Fatigue design of structures under thermomechanical loadings

This paper presents a global approach to the design of structures that experience thermomechanical fatigue loading, which has been applied successfully in the case of cast‐‐iron exhaust manifolds. After a presentation of the design context in the automotive industry, the important hypotheses and choices of this approach, based on a thermal 3D computation, an elastoviscoplastic constitutive law and the dissipated energy per cycle as a damage indicator associated with a failure criterion, are first pointed out. Two particular aspects are described in more detail: the viscoplastic constitutive models, which permit a finite element analysis of complex structures and the fatigue criterion based on the dissipated energy per cycle. The FEM results associated with this damage indicator permit the construction of a design curve independent of temperature; an agreement is observed between the predicted durability and the results of isothermal as well as non isothermal tests on specimens and thermomechanical fatigue tests on real components on an engine bench. These results show that thermomechanical fatigue design of complex structures can be performed in an industrial context.     

THE EFFECT OF LACTIC ACID DECONTAMINATION ON THE MICROFLORA ON MEAT

Meat acquires a characteristic microflora after slaughter and butchering. This normal microflora may be beneficial in that it occupies a niche that would otherwise permit unimpeded growth of potential pathogens. Lactic acid decontamination (LAD) is intended to eliminate pathogens but also affects the normal microflora. The immediate effect was studied by means of an in-vitro model. Experiments using this model achieved a reduction in the mesophilic Enterobacteriaceae on meat by 1 to 3 log₁₀ colony forming units and shifted the predominant microflora in the direction of Gram-positive bacteria and yeasts. Colony counts were an unreliable indicator of LAD-induced reductions in Gramnegative foodborne pathogens. Their reduction depended on the ratio of the more lactic acid resistant Gram-positive bacteria to the more sensitive Gram-negative bacteria. The rank order of lactic acid-resistance of nonpathogens present on meat was yeasts = lactobacilli > psychrotrophic Gram-positive bacteria > mesophilic Enterobacteriaceae. Psychrotrophic Gram-negative bacteria were the most sensitive.     

Pollen morphological investigations of family Cactaceae and its taxonomic implication by light microscopy and scanning electron microscopy

The family Cactaceae is the diversified group of angiosperm plants whose pollen statistics has been used for taxonomic identification. In this article, we present the pollen morphology of eight species belong to seven taxonomically complex genera of Cactaceae including Astrophytum, Cylindropuntia, Echinocereus, Echinopsis, Mammillaria, Opuntia, and Thelocactus using light and scanning electron microscopy. The pollen grains were acetolyzed, measured, described, and electron photomicrographs were taken. Cactaceae can be characterized by presenting different palynomorphological features including pollen type, sculpturing, polar and equatorial diameter, aperture orientation, exine thickness, P/E ratio, and echini features. Four types of pollen shapes, that is, prolate spheroidal (three species), subprolate (two species), prolate (two species), and oblate spheroidal in Echinocereus reichenbachii were observed. The polar and equatorial diameter observed maximum in O. ficus indica 116.95 and 112.27 μm while minimum in M. compressa 38.42 and 21.05 μm. Pollen of two types, tricolpate in members of subfamily Cactioideae and pantoporate in the Opuntioideae were examined. The fertility percentage has been observed maximum in Opuntia macrocentra (83.84%) and minimum in Opuntia ficus‐indica (57.89%). Exine sculpturing showing great variations such as granulate, reticulate, granulate perforate and micro‐echinate foveolate ornamentation was examined only in Echinopsis eyriesii. A key to species, based on pollen micromorphological attributes, has been constructed for correct identification of complex cactus species.     

Element distinctness on one-tape Turing machines: a complete solution

We give a complete characterization of the complexity of the element distinctness problem for n elements of bits each on deterministic and nondeterministic one-tape Turing machines. We present an algorithm running in time for deterministic machines and nondeterministic solutions that are of time complexity . For elements of logarithmic size , on nondeterministic machines, these results close the gap between the known lower bound and the previous upper bound . Additional lower bounds are given to show that the upper bounds are optimal for all other possible relations between m and n. The upper bounds employ hashing techniques, while the lower bounds make use of the communication complexity of set disjointness.Received: 23 April 2001, Published online: 2 September 2003Holger Petersen: Supported by Deutsche Akademie der Naturforscher Leopoldina, grant number BMBF-LPD 9901/8-1 of Bundesministerium für Bildung und Forschung.     

激光熔区中应力缓解的X射线衍射法测定

AISI 304奥氏体不锈钢表面经激光熔化处理,引入一个大的张应力,它可用注Ne的方法使其缓解本文介绍测量0.1μm薄层应力变化的原理和技术,由测得的应力分布曲线证明了注Ne缓解表面张应力的效果