Adenosine and 2′‐Deoxyadenosine Modified with Boron Cluster Pharmacophores as New Classes of Human Blood Platelet Function Modulators

Novel types of adenosine and 2′‐deoxyadenosine derivatives containing boron clusters at positions C2′, N6, or C8 were synthesized. The effect of these modified compounds on platelet function was studied. Modification of adenosine at the C2′ position with a para‐carborane cluster (C₂B₁₀H₁₁) results in efficient inhibition of platelet function, including aggregation, protein secretion, and P‐selectin expression induced by thrombin or ADP. These preliminary findings and the new chemistry proposed form the basis for the development of a new class of adenosine analogues that modulate human blood platelet activities.     

Cytotoxicity Study of UV-Laser-Irradiated PLLA Surfaces Subjected to Bio-Ceramisation: A New Way towards Implant Surface Modification

In this research we subjected samples of poly(L-lactide) (PLLA) extruded film to ultraviolet (193 nm ArF excimer laser) radiation below the ablation threshold. The modified film was immersed in Simulated Body Fluid (SBF) at 37 °C for 1 day or 7 days to obtain a layer of apatite ceramic (CaP) coating on the modified PLLA surface. The samples were characterized by means of optical profilometry, which indicated an increase in average roughness (Ra) from 25 nm for the unmodified PLLA to over 580 nm for irradiated PLLA incubated in SBF for 1 day. At the same time, the water contact angle decreased from 78° for neat PLLA to 35° for irradiated PLLA incubated in SBF, which suggests its higher hydrophilicity. The obtained materials were investigated by means of cell response fibroblasts (3T3) and macrophage-like cells (RAW 264.7). Properties of the obtained composites were compared to the unmodified PLLA film as well as to the UV-laser irradiated PLLA. The activation of the PLLA surface by laser irradiation led to a distinct increase in cytotoxicity, while the treatment with SBF and the deposition of apatite ceramic had only a limited preventive effect on this harmful impact and depended on the cell type. Fibroblasts were found to have good tolerance for the irradiated and ceramic-covered PLLA, but macrophages seem to interact with the substrate leading to the release of cytotoxic products.     

Optical characterization of HfO2 thin films

Hafnia films prepared onto silicon wafers at three substrate temperatures of 40, 160 and 280 °C are optically characterized utilizing the multi-sample method. The characterization uses the combination of variable angle spectroscopic ellipsometry and spectroscopic reflectometry within the spectral region 1.24-6.5 eV (190-1000 nm). The structural model of the HfO₂ films includes boundary nanometric roughness, thickness non-uniformity and refractive index profile. Spectral dependences of the film optical constants are expressed using a recently developed parametrized joint density of states model describing the dielectric response of both interband transitions and excitations of localized states below the band gap. It is shown that the observed weak absorption below the band gap does not correspond to the Urbach tail.     

Space Tourism: Waiting for Ignition

Space tourism is in its infancy, having been launched a little over a decade ago by billionaire businessman Dennis Tito's venture into Space. Ondřej Doule , Assistant Professor of Human-Centered Design and Aerospace Engineering at the Florida Institute of Technology, and Chair of the Space Architecture Technical Committee at the AIAA, considers the shift that will have to be made in designing Space Architecture as space shuttles and stations transition from being ostensibly high-security labs into floating hotels.     

Anti-SARS-CoV-2 Strategies and the Potential Role of miRNA in the Assessment of COVID-19 Morbidity,Recurrence, and Therapy

Recently, we have experienced a serious pandemic. Despite significant technological advances in molecular technologies, it is very challenging to slow down the infection spread. It appeared that due to globalization, SARS-CoV-2 spread easily and adapted to new environments or geographical or weather zones. Additionally, new variants are emerging that show different infection potential and clinical outcomes. On the other hand, we have some experience with other pandemics and some solutions in virus elimination that could be adapted. This is of high importance since, as the latest reports demonstrate, vaccine technology might not follow the new, mutated virus outbreaks. Thus, identification of novel strategies and markers or diagnostic methods is highly necessary. For this reason, we present some of the latest views on SARS-CoV-2/COVID-19 therapeutic strategies and raise a solution based on miRNA. We believe that in the face of the rapidly increasing global situation and based on analogical studies of other viruses, the possibility of using the biological potential of miRNA technology is very promising. It could be used as a promising diagnostic and prognostic factor, as well as a therapeutic target and tool.     

Polypyrrole thin films for gas sensors prepared by Matrix-Assisted Pulsed Laser Evaporation technology: Effect of deposition parameters on material properties

Thin films of polypyrrole (PPY) were prepared by Matrix-Assisted Pulsed Laser Evaporation (MAPLE) technology from two matrices: water and dimethylsulfoxide (DMSO). The deposition was carried out using a KrF excimer laser (laser fluence F ranged from 0.1 to 0.6 J cm^− 2). This work deals with optimization of two deposition parameters - laser fluence and number of pulses - for both matrices. From the deposition curves, the fluence thresholds, F_th, and maximum growth rates were subsequently determined (water matrix: F_th ~ 0.40-0.45 J cm^− 2, maximum growth rate 0.16 nm pulse^− 1; DMSO matrix: F_th ~ 0.25-0.30 J cm^− 2; maximum growth rate 0.20 nm pulse^− 1). The changes in chemical composition of deposited layers were studied by Attenuated Total Reflection Fourier Transform Infrared spectroscopy. Surface morphology was characterized by Atomic Force Microscopy. A discussion is also presented concerning relationships between laser fluence and chemical composition of deposited layers with respect to their potential application in gas sensors. Finally, the response of a sensor with a MAPLE deposited PPY active layer to air humidity is presented.     

In vivo optical detection of pH in microscopic tissue samples of Arabidopsis thaliana

Minimally invasive in vivo measurement of pH in microscopic biological samples of μm or μl size, e.g. plant cells, tissues and saps, may help to explain complex biological processes. Consequently, techniques to achieve such measurements are a focus of interest for botanists. This paper describes a technique for the in vivo measurement of pH in the range pH 5.0 to pH 7.8 in microscopic plant tissue samples of Arabidopsis thaliana based on a ratiometric fluorescence method using low-loss robust tapered fiber probes. For this purpose tapered fiber probes were prepared and coated with a detection layer containing ion-paired fluorescent pH-transducer 8-hydroxypyrene-1,3,6-trisulfonic acid trisodium salt (c-HPTS). A fluorescence ratiometric approach was employed based on excitation at 415 nm and 450 nm and on the comparison of the fluorescence response at 515 nm. The suitability of tapered fiber probes for local detection of pH between 5.0 and 7.8 was demonstrated. A pH sensitivity of 0.15 pH units was achieved within the pH ranges 5.0–5.9 and 7.1–7.8, and this was improved to 0.04 pH units within the pH range 5.9–7.1. Spatial resolution of the probes was better than 20 μm and a time response within 15–20 s was achieved. Despite the minute dimensions of the tapered fiber probes the setup developed was relatively robust and compact in construction and performed reliably. It has been successfully employed for the in vivo local determination of pH of mechanically resistant plant tissues of A. thaliana of microscopic scale. The detection of momentary pH gradients across the intact plant seems to be a good tool for the determination of changes in pH in response to experimental treatments affecting for example enzyme activities, availability of mineral nutrients, hormonal control of plant development and plant responses to environmental cues.     

Auxin Metabolite Profiling in Isolated and Intact Plant Nuclei

The plant nucleus plays an irreplaceable role in cellular control and regulation by auxin (indole-3-acetic acid, IAA) mainly because canonical auxin signaling takes place here. Auxin can enter the nucleus from either the endoplasmic reticulum or cytosol. Therefore, new information about the auxin metabolome (auxinome) in the nucleus can illuminate our understanding of subcellular auxin homeostasis. Different methods of nuclear isolation from various plant tissues have been described previously, but information about auxin metabolite levels in nuclei is still fragmented and insufficient. Herein, we tested several published nucleus isolation protocols based on differential centrifugation or flow cytometry. The optimized sorting protocol leading to promising yield, intactness, and purity was then combined with an ultra-sensitive mass spectrometry analysis. Using this approach, we can present the first complex report on the auxinome of isolated nuclei from cell cultures of Arabidopsis and tobacco. Moreover, our results show dynamic changes in auxin homeostasis at the intranuclear level after treatment of protoplasts with free IAA, or indole as a precursor of auxin biosynthesis. Finally, we can conclude that the methodological procedure combining flow cytometry and mass spectrometry offers new horizons for the study of auxin homeostasis at the subcellular level.     

Changing Temperature Conditions during Somatic Embryo Maturation Result in Pinus pinaster Plants with Altered Response to Heat Stress

Under the global warming scenario, obtaining plant material with improved tolerance to abiotic stresses is a challenge for afforestation programs. In this work, maritime pine (Pinus pinaster Aiton) plants were produced from somatic embryos matured at different temperatures (18, 23, or 28 °C, named after M18, M23, and M28, respectively) and after 2 years in the greenhouse a heat stress treatment (45 °C for 3 h/day for 10 days) was applied. Temperature variation during embryo development resulted in altered phenotypes (leaf histology, proline content, photosynthetic rates, and hormone profile) before and after stress. The thickness of chlorenchyma was initially larger in M28 plants, but was significantly reduced after heat stress, while increased in M18 plants. Irrespective of their origin, when these plants were subjected to a heat treatment, relative water content (RWC) and photosynthetic carbon assimilation rates were not significantly affected, although M18 plants increased net photosynthesis rate after 10 days recovery (tR). M18 plants showed proline contents that increased dramatically (2.4-fold) when subjected to heat stress, while proline contents remained unaffected in M23 and M28 plants. Heat stress significantly increased abscisic acid (ABA) content in the needles of maritime pine plants (1.4-, 3.6- and 1.9-fold in M18, M23, and M28 plants, respectively), while indole-3-acetic acid content only increased in needles from M23 plants. After the heat treatment, the total cytokinin contents of needles decreased significantly, particularly in M18 and M28 plants, although levels of active forms (cytokinin bases) did not change in M18 plants. In conclusion, our results suggest that maturation of maritime pine somatic embryos at lower temperature resulted in plants with better performance when subjected to subsequent high temperature stress, as demonstrated by faster and higher proline increase, lower increases in ABA levels, no reduction in active cytokinin, and a better net photosynthesis rate recovery.