Observation of apparent MOS regimes on Al/PECVD grown boron nitride/p-c-Si/Al MIS structure,investigated through admittance spectroscopy

PECVD grown boron nitride (BN) on crystalline silicon (c-Si) semiconductor was investigated by admittance measurement in the form of metal/insulator/semiconductor (MIS) structure. Apart from well-known regimes of traditional MOS structure, gradual bypassing of depletion layer was observed once ambient temperature (frequency) increased (decreased). Such an anomalous behavior was interpreted through modulations of charges located within BN film and/or at the interfacial layer of BN film/c-Si junction in terms of weighted average concept.     

An experimental optimization study on a tube-in-shell latent heat storage

Thermal energy storage (TES) using phase change materials (PCMs) has recently received considerable attention in the literature, due to its high storage capacity and isothermal behaviour during the storage (melting or charging) and removal (discharging or solidification). In this study, a novel modification on a tube-in-shell-type storage geometry is suggested. In the proposed geometry, the outer surface of the shell is inclined and it is the objective of this study to determine the optimum range for the inclination angle of the shell surface. Paraffin with a melting temperature of 58.06°C, which is supplied by the Merck Company, is used as the PCM. The PCM is stored in the vertical annular space between an inner tube through which the heat transfer fluid (HTF), hot water, is flowing and a concentrically placed outer shell. At first, the thermophysical properties of this paraffin are determined through the differential scanning calorimeter (DSC) analysis. Temporal behaviour of the PCM undergoing a non-isothermal solid–liquid phase change during its melting or charging by the HTF are determined for different values of the inlet temperature and the mass flow rate of the HTF. The new geometry is shown to respond well with the melting characteristics of the PCM and to enhance heat transfer inside the PCM for a specific range of the shell inclination angle. Copyright © 2006 John Wiley & Sons, Ltd.     

Screening of free radical scavenging capacity and antioxidant activities of Rosmarinus officinalis extracts with focus on location and harvesting times

Methanolic extracts from the leaves of Rosmarinus officinalis (rosemary) harvested from different locations of Turkey at four different times of the year were analyzed by HPLC, and their radical scavenging capacities and antioxidant activities were studied by various assays. The amounts of carnosol, carnosic acid and rosmarinic acid, active constituents of rosemary, varied in different geographical regions of growth, and also showed a seasonal variation. The levels of the constituents were higher in the warm months of June 2004 and September 2004. The antioxidant activities of 12 extracts were determined by in vitro DPPH radical scavenging activity, by Trolox equivalent antioxidant capacity (TEAC), and by reversing H₂O₂-induced erythrocyte membrane lipid peroxidation (EMLP). The two antioxidant enzyme activities of human erythrocyte, namely superoxide dismutase (SOD) and catalase (CAT), after in vitro incubation with the extracts, were also examined in order to see whether the observed effects are related to altered enzymatic efficiency. The resulting values were correlated with active metabolite and total phenol contents of the extracts. The results indicated that the plants harvested in September possessing higher levels of active constituent had superior antioxidant capacities compared to the ones collected at other times. With respect to the location, plants harvested from the Izmir region had lower total phenol and active constituent levels resulting in poorer antioxidant activity.     

Investigation of cylinder pressure for H2/CH4 mixtures at different loads

The purpose of this study is to experimentally analyze the performance and the pollutant emissions of a four-stroke spark-ignition engine operating on natural gas–hydrogen blends of 0%, 10%, 20% and 30% at full load and 65% load for different excess air ratios. This present work was carried out on a Ford engine. This is a four-stroke cycle four-cylinder spark-ignition engine with a bore × stroke of 80.6 × 88 mm and a compression ratio of 10:1. Experiments were made at a constant engine speed of 2000 rpm. CO, CO₂ and HC emission values and cylinder pressures were measured. The results showed that while the excess air ratio increases, CO and CO₂ emission values decrease.     

Photon energy absorption parameters for composite mixtures with boron compounds

Boron compounds that are used in the manufacturing of a variety of products are introduced to the environment in the form of waste. The radiation shielding measurements of mixtures that contain boron compounds is considered to be a topic of concern. The mass attenuation coefficients of (PbO and K₂B₄O₇⋅4H₂O) and (PbO and H₃BO₃) as functions of their changing contents have been measured in the X-ray energy range from 25.191 to 57.903 keV. These values are used to determine the effective atomic number of mixtures. The γ-rays emitted from an Am²⁴¹ annular source have been sent to secondary sources whose characteristic X-rays have been used for transmission arrangement. The characteristic X-rays of the secondary sources have been counted by a Si(Li) detector with a resolution of 149 eV at 5.9 keV. Also, the total effective atomic number of each mixture was determined by using the mixture rule. The measured values were compared with theoretically calculated values.     

Effective atomic numbers of some composite mixtures including borax

Effective atomic numbers for (PbO and Na₂B₄O₇10H₂O) and (UO₂(NO₃)₂, and Na₂B₄O₇10H₂O) mixtures against changing contents of PbO, Na₂B₄O₇10H₂O, and UO₂(NO₃)₂ were measured in the X-ray energy range from 25.0 to 58.0 keV. The gamma rays emitted by a ²⁴¹Am annular source have been sent on the absorbers which emits their characteristic X-rays to be used in transmission arrangement. The X-rays were counted by a Si(Li) detector with a resolution of 146 eV at 5.90 keV. The changing compositions of the compounds were assigned to be 0, 0.167, 0.333, 0.500, 0.666, 0.833 and total masses of the mixtures were adjusted to be identical. Also, the total effective atomic numbers of each mixture were estimated by using the mixture rule. The measured values were compared with estimated values for the mixtures.     

Profiling of in vitro neurobiological effects and phenolic acids of selected endemic Salvia species

The ethyl acetate and methanol extracts from 16 Salvia L. species were screened for their inhibitory activity against acetylcholinesterase, butyrylcholinesterase, lipoxygenase, and tyrosinase; the enzymes linked to neurodegeneration. Their antioxidant activity was also tested using DPPH radical scavenging, metal-chelation, and ferric-reducing antioxidant power (FRAP) assays. Total flavonoid content of the extracts was determined by AlCl₃ reagent, while HPLC technique was applied for analysis of various phenolic acids in the extracts. The extracts exerted weak cholinesterase and tyrosinase inhibition, and remarkable inhibition against lipoxygenase (13.07 ± 2.73-74.21 ± 5.61%) at 100 μg ml⁻¹. The methanol extracts showed higher antioxidant activity in DPPH radical scavenging and FRAP assays. The extracts were analyzed for their gallic, protocateuchic, p-hydroxy-benzoic, vanillic, caffeic, chlorogenic, syringic, o- and p-coumaric, ferulic, rosmarinic, and tr-cinnamic acid contents and the methanol extract of Salvia ekimiana (153.50 mg 100 g⁻¹) was revealed to be the richest in terms of rosmarinic acid.     

Band alignment of Cd(1 − x)ZnxS produced by spray pyrolysis method

Cd_(1 − x)Zn_xS thin films have been grown on glass substrates by the spray pyrolysis method using CdCl₂ (0.05 M), ZnCl₂ (0.05 M) and H₂NCSNH₂ (0.05 M) solutions and a substrate temperature of 260 °C. The energy band gap, which depends on the mole fraction × in the spray solution used for preparing the Cd_(1 − x)Zn_xS thin films, was determined. The energy band gaps of CdS and ZnS were determined from absorbance measurements in the visible range as 2.445 eV and 3.75 eV, respectively, using Tauc theory. On the other hand, the values calculated using Elliott-Toyozawa theory were 2.486 eV and 3.87 eV, respectively. The exciton binding energies of Cd_0.8Zn_0.2S and ZnS determined using Elliott-Toyozawa theory were 38 meV and 40 meV, respectively. X-ray diffraction results showed that the Cd_(1 − x)Zn_xS thin films formed were polycrystalline with hexagonal grain structure. Atomic force microscopy studies showed that the surface roughness of the Cd_(1 − x)Zn_xS thin films was about 50 nm. Grain sizes of the Cd_(1 − x)Zn_xS thin films varied between 100 and 760 nm.