Solar building—European Union Research and Development Programmes

The European Commission's (EC) energy R&D programmes have completed two decades of progress. In the building sector special attention has been given to technology transfer and research dissemination, because of the particular problems which arise given the characteristics of the European construction industry, its diversity and fractured structure, and rather conservative nature.Projects such as the earlier Project MONITOR and BUILDING 2000, and the more recent INNOBUILD and SOLINFO projects and the Solar House programme together represent an unusual, if not unparalleled, effort aimed at bringing about technical change in building design and providing the necessary design and evaluation support and tools to professional architects and students and, to a lesser extent, to engineers. These projects are complemented by (and draw heavily from) an ambitious but clearly-targeted series of research projects investigating major energy-related issues concerning the heating, cooling and daylighting of buildings and deficiencies in knowledge of climate and human comfort, and building performance; activities such as the construction of passive solar test centres in ten EU Member States, each typically with four identical test cells equipped with interchangeable south walls, identical heating and cooling systems, sensors, and data acquisition systems. There is now in Europe considerable emphasis on the challenges of building in warmer climates, and on advancing daylighting design and performance and developing new materials.     

The influence of breast size on late radiation effects and association with radiotherapy dose inhomogeneity

A prospective assessment of late changes in breast appearance in 559 patients after tumour excision and radiotherapy for early breast cancer noted a strong association with breast size. Only 3/48 (6%) patients with small breasts developed moderate or severe late changes compared with 94/423 (22%) with medium sized breasts and 34/88 (39%) patients with large breasts (p < 0.001). One possibility is that greater radiation changes are related to greater dose inhomogeneity in women with large breasts. To explore this hypothesis, radiation dose distributions were assessed in a separate group of 37 women in whom three-level transverse computer tomographic images of the breast in the treatment position were available. A significant correlation was found between breast size and dose inhomogeneity which may account for the marked changes in breast appearance reported in women with large breasts.     

Exit of the pre-TCR from the ER/cis-Golgi is necessary for signaling differentiation, proliferation, and allelic exclusion in immature thymocytes

A major issue is whether surface expression of the pre-TCR is necessary for signaling the development of immature thymocytes. To address this question, we generated transgenic mice expressing a TCRbeta chain that had a strong endoplasmic reticulum (ER) retrieval signal (TCRbetaER) and that was expressed intracellularly but failed to reach the cell surface. In TCRbetaER transgenic mice, there was a failure of allelic exclusion. Also, the transgene failed to rescue the developmental defects observed in TCRbeta-null mice. In contrast, TCRbeta transgenes with a mutant ER retrieval sequence or lacking this sequence signaled efficient allelic exclusion and suppressed the TCRbeta-/- defect. These data show that exit of the pre-TCR from the ER/cis-Golgi is required for progression through the double-negative thymocyte checkpoint.     

An ergonomic evaluation of nursing assistants' job in a nursing home.

Thirty-eight nursing assistants (NAs) in a nursing home ranked and rated 16 different patient handling tasks for perceived stresses to the low back. The nursing assistants were observed for 79 4 h shifts and were videotaped for 14 4 h shifts to describe a typical workday and to determine the number of patient-handling tasks performed per shift, the use of assistive devices, and biomechanical stresses to the low back. In addition, data were collected on nursing assistants' and patients' characteristics. The top eight ranked tasks included transferring patient from toilet to wheelchair (WC), WC to toilet, WC to bed, bed to WC, bathtub to WC, chairlift to WC, weighing patients and lifting patients up in bed. The mean ratings of perceived exertion for these tasks were between 'somewhat hard' and 'hard'. The estimated compressive force on L5/S1 disc for the 50th percentile patient weight ranged from 3.7 to 4.9 KN. Nursing assistants worked in teams of two and performed 24 patient transfers per 8 h shift by manually lifting and carrying patients. Assistive devices (a hydraulic lift and gait belt) were used less than 2% of the time. Patient safety and comfort, lack of accessibility, physical stresses associated with the devices, lack of skill, increased transfer time, and lack of staffing were some of the reasons for not using these assistive devices. Environmental barriers (such as confined workplaces, an uneven floor surface, lack of adjustability of beds, stationary railings around the toilet, etc.) made the job more difficult. Nursing assistants had a high prevalence of low-back pain and 51% of nursing assistants visited a health care provider in the last three years for work related low-back pain.     

A sensing strategy for the reverse engineering of machined parts

The reverse engineering of machined parts requires sensing an existing part and producing a design (and perhaps a manufacturing process) for it. We have developed a reverse engineering system that has proven effective with a set of machined parts. This paper describes the system, presents some results, and discusses strategy for a new system.This work was supported by ARPA under ARO grant number DAAH04-93-G-0420, DARPA grant N00014-91-J-4123, NSF grant CDA 9024721, and a University of Utah Research Committee grant. All opinions, findings, conclusions or recommendations expressed in this document are those of the authors and do not necessarily reflect the views of the sponsoring agencies.     

The effect of growth hormone replacement on cortisol metabolism and glucocorticoid sensitivity in hypopituitary adults

OBJECTIVE: Growth hormone (GH) replacement therapy in hypopituitary adults is associated with sodium and water retention. The underlying mechanisms are incompletely understood and a possible contribution of altered cortisol metabolism or action has not been evaluated. We have investigated the effect of GH replacement therapy on cortisol metabolism, cortisol binding globulin and in-vitro glucocorticoid sensitivity in a group of adult hypopituitary patients. DESIGN AND PATIENTS: We studied 19 adult hypopituitary patients (18 adult onset, M:F, 6:13), who were receiving conventional hydrocortisone (16 patients), thyroxine (14 patients), triiodothyronine (1 patient), sex steroid (9 patients), human chorionic gonadotrophin (1 patient) or desmopressin (6 patients) replacement during a 6-month, double blind controlled trial of GH therapy (active:placebo, 8:11) followed by a 6-month open phase of GH (mean dose: 0.2 IU/kg/week, range 0.051-0.27) and after a 6-week washout phase following discontinuation of GH therapy. MEASUREMENTS: Twenty-four-hour urine free cortisol, cortisol metabolites (CoM), ratio 11-hydroxy/11-oxo CoM (F/E) and ratio 5 alpha/beta tetrahydrocortisol were measured at 6 months, 12 months and after the 6 week washout phase. Serum cortisol binding globulin was measured basally, at 6 months, 12 months and after washout. Glucocorticoid sensitivity was determined in lymphocyte preparations from 8 patients, during GH therapy and after washout, using an in-vitro technique dependent on dexamethasone suppression of phytohaemagglutinin-stimulated thymidine incorporation into DNA. Plasma renin activity and aldosterone were measured after 6-12 months GH therapy and after washout. RESULTS: After 6 months of GH, in patients on hydrocortisone (n = 9), there were significant decreases in CoM (mean decrement 21%, P < 0.01), F/E (mean decreased from 1.27 to 1.0, P = 0.04; reference range 0.33-1.29) and 5 alpha/5 beta tetrahydrocortisol (mean decreased from 0.67 to 0.48, P = 0.01) and a subsequent increase after washout. Patients not on hydrocortisone (n = 2) demonstrated a normal basal F/E falling by 25% on GH therapy but no change in CoM. During 12 months of GH therapy, patients on hydrocortisone (n = 7) demonstrated a further trend to decrement in CoM (P = 0.09) which reversed after washout (P = 0.04). Urine free cortisol tended to fall during GH therapy and increased significantly following washout after 12 months treatment (P < 0.02). Serum cortisol binding globulin decreased by 20% (P < 0.05) during 12 months GH treatment but remained within the reference range. In-vitro studies demonstrated a trend to reduced glucocorticoid sensitivity on GH therapy; the maximum inhibition of phytohaemagglutinin by dexamethasone tended to be less on GH therapy (P = 0.052) and was also lower than in 29 normal volunteers (P < 0.05). There were no significant changes in plasma renin but there was a small increment in aldosterone in recumbent patients (P = 0.04) during the open phase of GH therapy in the placebo arm. CONCLUSIONS: GH therapy in hypopituitary adults is associated with an apparent reduction in availability of administered hydrocortisone as measured by urine cortisol metabolites and urine free cortisol. This effect is unlikely to be clinically significant except possibly in ACTH deficient subjects on suboptimal hydrocortisone replacement. The changes in F/E suggest that GH may directly or indirectly modulate the activity of 11 beta-hydroxysteroid dehydrogenase. The apparent decrease in glucocorticoid sensitivity during GH therapy, demonstrated in vitro, merits further investigation.     

Computer simulations of time-dependent suppression of EOF by polymer coatings

We use molecular dynamics simulations in order to investigate the time evolution of the effect of adsorbed polymer coatings on the electro-osmotic flow (EOF) in a capillary. Weakly adsorbed coatings show no time-dependent performance, but they do not strongly reduce the EOF. On the other hand, strongly adsorbed coatings made of longer polymer chains are often quenched in non-equilibrium conformations that can strongly reduce the EOF over extremely long periods of time. For intermediate adsorption strengths, we observe that the EOF increases as a function of time due to the relaxation of the coating layer. The concentration of polymers in solution and the length of the polymer chains also affect the time-dependence of the EOF. These results show that the quality of electrophoretic separations can depend on the waiting time between the formation of the coating and the beginning of the separation. We conclude by suggesting experimental tests of our predictions.     

Nucleation and Growth Characteristics of Cavities during the Early Stages of Tensile Creep Deformation in a Superplastic Zirconia–20 wt% Alumina Composite

Constant-stress tensile creep experiments on a superplastic 3-mol%-yttria-stabilized tetragonal zirconia composite with 20 wt% alumina revealed that cavities nucleate relatively early during tensile deformation. The number of cavities nucleated increases with increasing imposed stress. The cavities nucleate at triple points associated largely with an alumina grain, and then grow rapidly in a cracklike manner to attain dimensions on the order of the grain facet size. It is suggested that coarser-grained superplastic ceramics exhibit lower ductility due to the ease in formation of such grain boundary facet-cracks and their interlinkage to form a macroscopic crack of critical dimensions.     

Liquid Immiscibility in the System K2O-B2O3-SiO2

The subliquidus miscibility gap in the system K₂O-B₂O₃-SiO₂ has been determined for compositions with molar ratios SiO₂/B₂O₃<2 and T≥550°C. The shape of the miscibility gap is an elongated dome similar in form to, but less extensive than those in the lithium and sodium borosilicate systems. The consolute composition (molar) and temperature are estimated to be 4 ± 1 K₂O -30±8 B₂O₃-66±8 SiO₂ and 629±5°C, respectively .     

AmbiKraf

This paper presents, AmbiKraf, a non-emissive fabric display that subtly animates patterns on common fabrics. We use thermochromic inks and peltier semiconductor elements to achieve this technology. With this technology we have produced numerous prototypes from animated wall paintings to pixilated fabric displays. The ability of this technology to subtly and ubiquitously change the color of the fabric itself has made us able to merge different fields and technologies with AmbiKraf. In addition, with an animated room divider screen, Ambikraf merged its technology with Japanese Byobu art to tighten the gap between traditional arts and contemporary technologies. Through this AmbiKraf Byobu art installation and other installations, we discuss the impact of this technology as a ubiquitous fabric display. With focus to improvements of some limitations of the existing system, we present our future vision that enables us to merge this technology into more applications fields thus making this technology a platform for ubiquitous interactions on our daily peripherals.