The effect of nitrogen flow rate on TiBN coatings deposited on cold work tool steel

TiBN coatings have high hardness and high adhesion. Due to these excellent properties there has been increasing interest in TiBN coatings. In this study, TiBN coatings were deposited on AISI D2 cold work tool steel and silicon wafers by closed field unbalanced magnetron sputtering (CFUBMS). The structural, mechanical and adhesion properties of these coatings were analysed by X-ray diffraction, scanning electron microscopy, microhardness test, indentation test and scratch tests. TiBN coatings produced by magnetron sputtering exhibited a dense and columnar structure. These results indicate that TiB₂, TiN and h-BN exist in crystalline forms at all coatings. The highest hardness was obtained at the lowest nitrogen flow rate. Very few cracks were observed at the edge of the indentation marks at the highest nitrogen flow rate. The highest critical load obtained with scratch test was identified as 102?N.     

Effects of ammonium polyphosphate and triphenyl phosphate on the flame retardancy,thermal, and mechanical properties of glass fiber–reinforced PLA/PC composites

The purpose of this study is to increase of the flammability properties of the glass fiber (GF)–reinforced poly (lactic acid)/polycarbonate (PLA/PC) composites. Ammonium polyphosphate (APP) and triphenyl phosphate (TPP) were used as flame retardants that are including the organic phosphor to increase flame retardancy of GF‐reinforced composites. APP, TPP, and APP‐TPP mixture flame retardant including composites were prepared by using extrusion and injection molding methods. The properties of the composites were determined by the tensile test, limiting oxygen index (LOI), differential scanning calorimetry (DSC), and heat release rate (HRR) test. The minimum T_g value was observed for the TPP including PLA/PC composites in DSC analysis. The highest tensile strength was observed in GF‐reinforced PLA/PC composites. In the LOI test, GF including composite was burned with the lowest concentration of oxygen, and burning time was the longest of this composite. However, the shortest burning time was obtained by using the mixture flame retardant system. The flame retardancy properties of GF‐reinforced PLA/PC composite was improved by using mixture flame retardant. When analyzed the results of HRR, time to ignition (TTI), and mass loss rate together, the best value was obtained for the composite including APP.     

Preparation of chitosan‐coated magnetite nanoparticles and application for immobilization of laccase

In this study, immobilization of laccase (L) enzyme on magnetite (Fe₃O₄) nanoparticles was achieved, so that the immobilized enzyme could be used repeatedly. For this purpose, Fe₃O₄ nanoparticles were coated and functionalized with chitosan (CS) and laccase from Trametes versicolor was immobilized onto chitosan‐coated magnetic nanoparticles (Fe₃O₄‐CS) by adsorption or covalent binding after activating the hydroxyl groups of chitosan with carbodiimide (EDAC) or cyanuric chloride (CC). For chitosan‐coated magnetic nanoparticles, the thickness of CS layer was estimated as 1.0–4.8 nm by TEM, isoelectric point was detected as 6.86 by zeta (ζ)‐potential measurements, and the saturation magnetization was determined as 25.2 emu g^?1 by VSM, indicating that these nanoparticles were almost superparamagnetic. For free laccase and immobilized laccase systems, the optimum pH, temperature, and kinetic parameters were investigated; and the change of the activity against repeated use of the immobilized systems were examined. The results indicated that all immobilized systems retained more than 71% of their initial activity at the end of 30 batch uses. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Polyindene/organo‐montmorillonite conducting nanocomposites. I. Synthesis,characterization, and electrokinetic properties

In this study, Na‐montmorillonite was organically modified with cetyltrimethylammoniumbromide (CTAB) and intercalated with in‐situ polymerized indene. Polyindene(PIn)/Organo‐MMT nanocomposites were obtained with three different compositions and coded as: K1: [PIn(94.5%)/O‐MMT(5.5%)], K2: [PIn(92.8%)/O‐MMT(7.2%)], and K3: [PIn(87.9%)/O‐MMT(12.1%)]. These nanocomposites were subjected to full characterization with various techniques. Electrokinetic studies were conducted to reveal the zeta (ζ)‐potential characteristics of the nanocomposites. ζ‐potentials of the materials were observed to decrease with increasing O‐MMT content. The cationic (CTAB) and anionic (sodium dodecylsulfate) surfactants were shifted the ζ‐potentials of the colloidal dispersions to more positive and more negative regions, respectively whereas nonionic surfactant (Triton X‐100) caused almost no change. The pH and temperature were observed to shift the ζ‐potential values of the nanocomposites to more negative and slightly more positive regions, respectively. With the addition of mono (NaCl), di (BaCl₂) and three (AlCl₃) valent salts, the ζ‐potential of the nanocomposites were shifted to more negative, more positive, and much more positive regions, respectively. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Poly(2‐hydroxyethyl methacrylate)/boric acid composite hydrogel as soft contact lens material: Thermal,optical, rheological,and enhanced antibacterial properties

The present work proposes to fabricate a composite hydrogel material that well characterized, transparent, biocompatible, and self‐antibacterial as potential soft contact lens material. For this purpose, poly(2‐hydroxyethyl methacrylate) (PHEMA)/boric acid (BA) composite hydrogels were successfully prepared by chemical crosslinking with BA through in situ polymerization using different BA ratios between 1 and 10% w/w. Afterward, the compositions, thermal stability, transparence, oxygen permeability, water uptake capacity, swelling ratio as well as morphological and rheological properties, in vitro degradability, in vitro cytotoxicity, and antibacterial properties of the all prepared materials were analyzed using a series of different techniques. The thermal stability, hydrophilicity, water uptake, oxygen permeability gradually increased depending ratio of BA, which is desirable for biomaterial. While the transparence and refractive index decreased, the composite hydrogels, except for BA content of 10 wt %, maintained enough transparency to be used for contact lens. In addition, PHEMA/BA composite hydrogels exhibited good cytocompatibility (PHEMA‐1%BA and PHEMA‐3%BA) and excellent antibacterial activity against Gram‐positive (Staphylococcus aureus and Enterococcus faecium) and Gram‐negative (Escherichia coli and Pseudomonas aeruginosa) bacteria. Overall, the results demonstrated that the obtained PHEMA/BA composite hydrogels could be considered as self‐antibacterial contact lens and a potential composite biomaterial for other applications. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46575.     

Synthesis and characterization of 2‐hydroxyethylmethacrylate/2‐(3‐indol‐yl)ethylmethacrylamide‐based novel hydrogels as drug carrier with in vitro antibacterial properties

In this study, a new cationic monomer 2‐(3‐indol‐yl)ethylmethacrylamide (IEMA) derived from tryptamine was synthesized in a single step and characterized by Fourier transform infrared (FTIR), ¹H‐NMR, and ¹³C‐NMR. Then, one‐step preparation of novel poly[2‐hydroxyethylmethacrylate‐c‐2‐(3‐indol‐yl)ethylmethacrylamide], or p(HEMA‐c‐IEMA), copolymeric hydrogels has been performed successfully with IEMA and 2‐hydroxyethylmethacrylate (HEMA) as monomers using free radical aqueous polymerization. The hydrogels were characterized with scanning electron microscopy, FTIR, elemental analysis, thermogravimetric analysis, and texture profile analysis instruments. p(HEMA‐c‐IEMA) hydrogels were used for swelling, diffusion, drug release, and antibacterial activity studies. The drug‐release behavior of the hydrogels was determined as a function of time at 37 °C in pH 1.2 and 7.2. The swelling and drug‐release studies showed that an increased IEMA amount caused a higher increase in swelling and drug‐release values. Additionally, zero‐order, first‐order, and Higuchi equation kinetic models were applied to the drug‐release data, and the data fit well in the Higuchi model, and the Peppas power‐law model was applied to the release mechanism. Finally, the antibacterial activities of the hydrogels were screened against Gram‐positive bacteria (Bacillus cereus and Staphylococcus aureus) and Gram‐negative bacteria (Escherichia coli and Salmonella typhimurium). © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45550.     

Synthesis and characterization of novel fluorine‐containing methacrylate copolymers: Reactivity ratios,thermal properties,and antimicrobial activity

The free‐radical‐initiated copolymerization of 2‐(4‐acetylphenoxy)‐2‐oxoethyl‐2‐methylacrylate (AOEMA) and 2‐(4‐benzoylphenoxy)‐2‐oxoethyl‐2‐methylacrylate (BOEMA) with 2‐[(4‐fluorophenyoxy]‐2‐oxoethyl‐2‐methylacrylate (FPEMA) were carried out in 1,4‐dioxane solution at 65°C using 2,2′‐azobisisobutyronitrile as an initiator with different monomer‐to‐monomer ratios in the feed. The monomers and copolymers were characterized by FTIR and ¹H‐ and ¹³C‐NMR spectral studies. ¹H‐NMR analysis was used to determine the molar fractions of AOEMA, BOEMA, and FPEMA in the copolymers. The reactivity ratios of the monomers were determined by the application of Fineman‐Ross and Kelen‐Tudos methods. The analysis of reactivity ratios revealed that BOEMA and AOEMA are less reactive than FPEMA, and copolymers formed are statistically in nature. The molecular weights (M _w and M _n) and polydispersity index of the polymers were determined using gel permeation chromatography. Thermogravimetric analysis of the polymers reveals that the thermal stability of the copolymers increases with an increase in the mole fraction of FPEMA in the copolymers. Glass transition temperatures of the copolymers were found to decrease with an increase in the mole fraction of FPEMA in the copolymers. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Possibility of producing lightweight,heat insulating bricks from pumice and H3PO4- or NH4NO3-hardened molasses binder

This investigation is based on the production of lightweight, heat-insulating, water-resistant or water-repellent materials from lightweight aggregates, such as pumice and/or expanded perlite, without using cement or plaster as a binder. The results of this investigation reveal that a H₃PO₄- or NH₄NO₃-hardened molasses binder with the addition of 2.5% borax could be an alternative binder for the production of lightweight, heat-insulating materials with moderate tensile strength. When these bricks were exposed to temperatures up to 825 °C, they did not lose their strength but, rather gained strength. Therefore, molasses binder could be an alternative to cement or plaster binder for construction and building materials with specific properties.     

A coordinate transformation approach for efficient repeated solution of Helmholtz equation pertaining to obstacle scattering by shape deformations

A computational model is developed for efficient solutions of electromagnetic scattering from obstacles having random surface deformations or irregularities (such as roughness or randomly-positioned bump on the surface), by combining the Monte Carlo method with the principles of transformation electromagnetics in the context of finite element method. In conventional implementation of the Monte Carlo technique in such problems, a set of random rough surfaces is defined from a given probability distribution; a mesh is generated anew for each surface realization; and the problem is solved for each surface. Hence, this repeated mesh generation process places a heavy burden on CPU time. In the proposed approach, a single mesh is created assuming smooth surface, and a transformation medium is designed on the smooth surface of the object. Constitutive parameters of the medium are obtained by the coordinate transformation technique combined with the form-invariance property of Maxwell’s equations. At each surface realization, only the material parameters are modified according to the geometry of the deformed surface, thereby avoiding repeated mesh generation process. In this way, a simple, single and uniform mesh is employed; and CPU time is reduced to a great extent. The technique is demonstrated via various finite element simulations for the solution of two-dimensional, Helmholtz-type and transverse magnetic scattering problems.     

Developing Predictive Equations to Model the Visual Demand of In-Vehicle Touchscreen HMIs

Touchscreen human–machine interfaces (HMIs) are commonly employed as the primary control interface and touch-point of vehicles. However, there has been very little theoretical work to model the demand associated with such devices in the automotive domain. Instead, touchscreen HMIs intended for deployment within vehicles tend to undergo time-consuming and expensive empirical testing and user trials, typically requiring fully functioning prototypes, test rigs, and extensive experimental protocols. While such testing is invaluable and must remain within the normal design/development cycle, there are clear benefits, both fiscal and practical, to the theoretical modeling of human performance. We describe the development of a preliminary model of human performance that makes a priori predictions of the visual demand (total glance time, number of glances, and mean glance duration) elicited by in-vehicle touchscreen HMI designs, when used concurrently with driving. The model incorporates information theoretic components based on Hick–Hyman Law decision/search time and Fitts’ Law pointing time and considers anticipation afforded by structuring and repeated exposure to an interface. Encouraging validation results, obtained by applying the model to a real-world prototype touchscreen HMI, suggest that it may provide an effective design and evaluation tool, capable of making valuable predictions regarding the limits of visual demand/performance associated with in-vehicle HMIs, much earlier in the design cycle than traditional design evaluation techniques. Further validation work is required to explore the behavior associated with more complex tasks requiring multiple screen interactions, as well as other HMI design elements and interaction techniques. Results are discussed in the context of facilitating the design of in-vehicle touchscreen HMI to minimize visual demand.