Convective transfer processes in chemically stable and reacting liquids with an internal structure

Dynamic processes are studied in media with softly and hardly internal destroyable configurations. A method is examined for the measurement of properties of media with spatial separation of the chemical transformation stages and thermal hydrodynamic measurements.Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 53, No. 5, pp. 781–789, November, 1987.     

Time-series model for wireless fading channels in isotropic and nonisotropic scattering environments

An autoregressive (AR) model is presented for isotropic and nonisotropic scattering environments characterized by Rice factor 0/spl les/K相似文献   

Dynamics of photosynthetic pigments in an Andean lake in Colombia

Guatavita Lake is a small, sheltered tropical high mountain lake located in the Colombian Andes, with a closed watershed and a maximum depth of 25 m. It is the freshwater source for human consumption in nearby small towns, as well as being a site of cultural value for the country, as it was a sacred place to indigenous peoples until about five centuries ago. As the structure and function of this aquatic ecosystem is poorly understood, this study provides initial knowledge on its phytoplankton biomass dynamics, which should be useful in designing efficient management plans with environmental baseline information for similar lakes elsewhere. Physical and chemical data, and photosynthetic pigment concentrations, were measured for the period November 1999–November 2000 at the central vertical axis of Guatavita Lake. The vertical profile of the chlorophyll‐a concentration was closely related to the dissolved inorganic nitrogen concentrations and the thermal stratification characteristics. The maximum chlorophyll‐a concentration in the metalimnion was recorded for the thermal stratification period (November 1999–June 2000). Deepening of the maximum chlorophyll‐a concentration began in February, continuing to June, when it reached its lowest value at the 15 m depth. The phytoplankton biomass values showed an increment within the entire water column at the beginning of the mixing period (July). The relation between the metalimnetic peak of chlorophyll‐a and the dissolved inorganic nitrogen concentration suggests the growth of the phytoplankton community is limited mainly by the availability of nitrogen.     

PECVD of diamond-like carbon (a-C:H) from the decomposition of methane in a high-density inductively coupled discharge

The paper describes an experimental investigation of the diamond-like carbon deposition process from methane precursor with an innovative high-density inductively coupled plasma source. It appears that a high plasma density allows a fast growth of diamond-like carbon coatings exhibiting a high hardness. In contrast to what is usually found in the literature, it seems that the ion species participate significantly to the growth of the carbon film when exposed to a high ion flux.     

To Be or Not to Be Electronic Money, That's the Question

The European Electronic Money Directive contains a definition of electronic money. However, determining which systems involving the use of electronic value fall under its scope can be more complicated than one might think. This issue is explored in this article through consideration of the question of whether prepaid mobile phone credits qualify as electronic money—a question that is currently being debated by telecommunications operators and regulators.     

The X-HPD—conceptual study of a large spherical hybrid photodetector

We present the results of a conceptual study demonstrating the feasibility of a large spherical hybrid photodetector with central anode. A prototype tube with 208 mm diameter and an anode in form of a metallic cube has been fabricated. In the final version of the so-called X-HPD concept the anode will be a scintillator cube with plated faces and a small photodetector to readout the bottom. The bialkali photocathode covers three quarters of the sphere surface. Combined use of this cathode in transmissive and reflective mode leads to effective quantum efficiency values exceeding those obtained in conventional hemispherical PMT designs. Further features of the concept are a photoelectron collection efficiency approaching 100% and a photon amplification in the scintillator crystal leading to a distinct single photoelectron signal.

Using a custom built electron accelerator based on a CsI transmissive photocathode, LSO and YAP block crystals in geometries adapted to the anode of an X-HPD have been tested with single photoelectrons in the 10–30 keV energy range. The scintillation light was readout with a conventional PMT or a Si-PM. More than 30 photoelectrons per incident electron could be detected with the PMT.     

Off-axis fatigue cracking behaviour in notched fibre metal laminates

The off‐axis fatigue cracking behaviour of notched fibre metal laminates under constant amplitude loading conditions was investigated experimentally and numerically. It was found that the off‐axis fatigue crack initiation life decreased as the off‐axis angles increased. This indicated that the off‐axis laminates raised the applied stress level in the aluminium (Al) layer and subsequently resulted in earlier cracking in the Al layer. The off‐axis fatigue crack initiation lives of notched fibre metal laminates were predicted using lamination theory and an energy‐based critical plane fatigue damage analysis from the literature. After a crack initiated in the Al layer, it was observed that the crack path angles of the off‐axis specimens were neither perpendicular to the fibre nor to the loading direction. A finite‐element model was established for predicting the crack path angles.     

A direct estimate of JIc from the load versus load-line displacement record

The purpose of this study is to examine the current standard fracture toughness test procedure to determine if there could be an easier method to get a J_Ic value from the test record. The current method for determining J_Ic involves a detailed computational and construction procedure. The objective in this study is to simplify the analysis for the determination of J_Ic. The results of this study show that the load and displacement record for a fracture toughness test can be used to directly estimate a J_Q value, a provisional value for fracture toughness, J_Ic. The J value taken at the maximum load point can be used along with an adjustment factor to estimate a J_Q value. This J_Q estimate is close to the one obtained from the construction procedure of ASTM Standard E 1820. When a unit‐sized specimen is tested, that is, a specimen with a width of 50 mm and a thickness of 25 mm the maximum load point provides a direct estimate of J_Q. Other sizes require a size adjustment factor, which is simply a square root relationship between the width of the test specimen and a unit width. The proposed new method of estimating J_Q is simple in concept and requires a minimum number of calculations. It appears to produce values of J_Q which are comparable to those obtained from the ASTM E1820 construction procedure and may produce less scatter.     

Significance of the elastic peak stress evaluated by FE analyses at the point of singularity of sharp V-notched components

The paper presents an expression useful to estimate the notch stress intensity factor (NSIF) from finite element analyses carried out by using a mesh pattern with a constant element size. The evaluation of the NSIF from a numerical analysis of the local stress field usually requires very refined meshes and then large computational effort. The usefulness of the presented expression is that (i) only the elastic peak stress numerically evaluated at the V‐notch tip is needed and no longer the whole stress–distance set of data; (ii) the adopted meshes are rather coarse if compared to those necessary for the evaluation of the whole local stress field. The proposed expression needs the evaluation of a virtual V‐notch tip radius, i.e. the radius which would produce the same elastic peak stress than that calculated by FEM at the sharp V‐notch tip by means of a given mesh pattern. Once such a radius has been theoretically determined for a given geometry, the expression can be applied in a wide range of notch depths and opening angles.