Improved modulation techniques for PWM-VSI drives

PWM-VSI based AC motor drives have two main problems. The inverter is nonlinear which causes instability problems in some specific working points of the AC machine and it emits acoustic noise due to the switching frequency. Nonlinearities like dead-time in the inverter, load dependent DC-link voltage ripple and the voltage drop across the switches are modeled and compensated by improved modulation techniques in order to obtain an almost ideal inverter. Different feedback and feedforward techniques are proposed. The acoustic noise is reduced by using a random modulation strategy. Measurements show a significant improvement by using feedforward and feedback techniques for linearizing the inverter. An improvement in reduction of the acoustic noise emission is also achieved by using random modulation. It is concluded that a combination of a random modulation strategy and feedforward/feedback techniques gives an almost ideal AC motor drive system     

New developments in CdTe and CdZnTe detectors for X and γ-ray applications

There has been considerable recent progress in II-VI semiconductor material and in methods for improving performance of the associated radiation detectors. New high resistivity CdZnTe material, new contact technologies, new detector structures, new electronic correction methods have opened the field of nuclear and x-ray imaging for industrial and medical applications. The purpose of this paper is to review new developments in several of these fields. In addition, we will present some recent results at LETI concerning first the CdTe 2-D imaging system (20 × 30 mm² with 400 × 600 pixels) for dental radiology and second the CdZnTe fast pulse correction method applied to a 5 × 5 × 5 mm³ CdZnTe detector (energy resolution = 5% for detection efficiency of 85% at 122 keV) for medical imaging.     

Microbiological safety of kinema, a fermented soya bean food

Kinema is a fermented soya bean food of Nepal and the hilly regions of North-eastern States of India. Generally, the fermentation is dominated by Bacillus spp. that often cause alkalinity and desirable stickiness in the product. The present study was undertaken in a limited number of commercial (market) kinema samples to test for the presence of foodborne pathogens and their properties. Bacillus cereus was present in numbers exceeding 10⁴ cfu/g product in five of the tested 15 market samples. Enterobacteriaceae and coliform bacteria exceeded 10⁵ cfu/g in 10 of the 15 samples. Escherichia coli exceeding 10⁵ cfu/g was found in two samples. Staphylococcus aureus was not detected in any of the tested samples. Of 31 isolated typical and atypical strains of B. cereus, 18 representative strains were tested qualitatively for the ability to produce diarrhoeal type enterotoxin (BCET) using an Oxoid BCET-RPLA test kit. Overall, BCET was formed by 12 strains in BHIG (brain heart infusion broth +1% glucose), by seven strains on sterilized cooked rice, and by five strains on sterilized cooked soya beans. Semi-quantitative tests on BCET revealed that levels exceeding 256 ng/g soya beans, produced by single pure culture inoculation with the isolated B. cereus strains, were reduced to ≤ 8 ng/g by frying kinema in oil, a common procedure when making kinema curry. It was also shown in a mixed pure culture experiment that a kinema strain B. Subtilis DK-W1, is able to suppress growth and BCET formation by a selected toxin producing strain (BC7-5) of B. cereus. It is concluded that the traditional way of making kinema and its culinary use in curries is safe. However, for novel applications of kinema, safety precautions are advisable.     

Measurement of PLL phase error caused by power supply noise

The measurement of the accumulated phase error of phase-locked loops (PLLs) in microprocessor systems is discussed. A system which creates controlled power supply noise and measures the PLL response is described. Examples of the use of this technique are shown for a PLL used in a 400 MHz microprocessor     

Minimum effort factor approach for sensor-based control of a four-joint 6-dof redundant manipulator

A sensor-driven control model and a minimum effort control algorithm in terms of time and energy expended during the execution of a movement strategy are described and validated for a multijointed cooperating robotic manipulator. Considering smooth, human-like (anthropomorphic) movements, using joint motion profiles achievable in real time as well as sensory information from all joints, and evaluating the total work expended by each manipulator joint during the execution of a movement strategy, a minimum effort motion trajectory is synthesized to precisely and efficiently position the robotic arm end-effector. This sensor-based approach significantly reduces the computational requirements for such cooperative motion. The minimum effort control algorithm generates several human-like arm movement strategies and selects the best strategy on the basis of expendable effort. The algorithm has an inherent basis to deal with obstacles in an efficient way. Detailed examples are described from the simulation studies. © 1994 John Wiley & Sons, Inc.     

Keynote paper: Architectures for integrating manufacturing activities and enterprises

This paper is a summary of the major technical report (Williams et al., 1993) of the IFAC/IFIP Task Force on Architectures for Integrating Manufacturing Activities and Enterprises. It presents a synopsis of the investigations of pertinent architectures undertaken, and the findings generated relating to the suitability of various architectures for the integration task. It also presents the Task Force's recommendations for achieving a “complete” architecture in terms of the necessary capabilities by “completing” a currently available architecture. The Task Force also outlined how a “best” architecture could be achieved by selecting and combining the best features of the available architectures.