The impact of multiple failure modes on estimating product field reliability

A difficulty in reliability modeling is how to capture the impact of all of the various reliability defect types. The general approach to optimizing burn-in that we describe in this article addresses a multiple-defect environment. The approach has four main parts: (i) modeling the product's failure rate distribution, (ii) establishing the Pareto distribution of reliability defects, (iii) assessing the kinetic information of each reliability defect, and (iv) estimating the DPPM under product use conditions. This article compares and contrasts the acceleration effects of various extrinsic defects found in 130- and 90-nm CMOS technology products.     

Multivariate statistical analysis of a high rate biofilm process treating kraft mill bleach plant effluent.

This study reports on a multivariate analysis of the moving bed biofilm reactor (MBBR) wastewater treatment system at a Canadian pulp mill. The modelling approach involved a data overview by principal component analysis (PCA) followed by partial least squares (PLS) modelling with the objective of explaining and predicting changes in the BOD output of the reactor. Over two years of data with 87 process measurements were used to build the models. Variables were collected from the MBBR control scheme as well as upstream in the bleach plant and in digestion. To account for process dynamics, a variable lagging approach was used for variables with significant temporal correlations. It was found that wood type pulped at the mill was a significant variable governing reactor performance. Other important variables included flow parameters, faults in the temperature or pH control of the reactor, and some potential indirect indicators of biomass activity (residual nitrogen and pH out). The most predictive model was found to have an RMSEP value of 606 kgBOD/d, representing a 14.5% average error. This was a good fit, given the measurement error of the BOD test. Overall, the statistical approach was effective in describing and predicting MBBR treatment performance.     

On the social acceptability of inherently safe technologies

Some techniques have encountered public opposition which has delayed their implementation or even blocked it completely. Inherently safer technologies are a good idea and can certainly improve safety, but research on public perceptions of hazardous technologies suggest that safety is only loosely coupled to social acceptability. It is concluded that the notion of inherent safety does not necessarily make technologies more acceptable. It is proposed that the inherent safety concept should be extended to embrace procedural and institutional innovations that involve lay and expert groups in decision-making and improved communications between technical experts and lay people     

A new design of flocculation tank: the Turbomix applied to weighted flocculation.

As far as flocculation is concerned, the agglomeration of suspended particles into flocs is highly linked to the hydraulic behaviour of the agitation. The Turbomix is a special design of mixing tank; its design was developed to better control the flow during the flocculation stage. It enables a significant decrease in footprint of the process. The combination of the Turbomix and ballasted flocculation has been studied during pilot trials in terms of treatment efficiency. Its controlled hydraulic behaviour explains the efficiency of the process as proved by CFD investigation.     

Making decentralised systems viable: a guide to managing decentralised assets and risks.

Decentralised systems have the potential to provide a viable option for long term sustainable management of household wastewater. Yet, at present, such systems hold an uncertain status and are frequently omitted from consideration. Their potential can only be realised with improved approaches to their management, and improved methods to decision-making in planning of wastewater systems. The aim of this paper is to demonstrate the value of a novel framework to guide the planning of decentralised systems so that asset management and risk management are explicitly considered. The framework was developed through a detailed synthesis of literature and practice in the area of asset management of centralised water and wastewater systems, and risk management in the context of decentralised systems. Key aspects of the framework are attention to socio-economic risks as well as engineering, public health and ecological risks, the central place of communication with multiple stakeholders and establishing a shared asset information system. A case study is used to demonstrate how the framework can guide a different approach and lead to different, more sustainable outcomes, by explicitly considering the needs and perspectives of homeowners, water authorities, relevant government agencies and society as a whole.     

A Mass Transport Model for Drying Wood under Isothermal Conditions

Mass transport in wood during drying can have different mechanisms at different periods of drying. Depending on the current moisture content (MC) and the structure of the wood, the driving forces for the mass transport are essentially different. Above the fiber saturation point (FSP), the lumens are partially saturated and the transport of liquid (free) water occurs as a consequence of capillary action. On the other hand, below the FSP, bound water within the cell walls is conveyed by diffusion, and water vapor in the lumens moves under influence of pressures gradient. Based on these considerations, a unified model is presented that takes into account the transport of the different moisture phases. Simulation of the drying of a Norway spruce sample at 50°C from about 135 to 7% MC is carried out using the finite element method (FEM). Comparison between the simulated average MC and the experimental observations obtained from X-ray computed tomography (CT) shows reasonable agreement. Possible simplifications in the model are briefly discussed as well as some aspects of the numerical implementation. Finally, the influence of absolute permeability on the average MC is studied.     

The use of acoustic emission methods as aids to the structural integrity assessment of nuclear power plants

Since it is an integral method permitting continuous monitoring and remote defect location, acoustic emission offers promising benefits for the nuclear industry. Particular potential applications relating to the integrity of the primary pressure boundary of nuclear reactors that are considered in this report are the detection of flaws during pre-service and requalification hydrotests, and continuous monitoring for crack growth and leakage.The correlations between fracture mechanics and acoustic emission are discussed on the basis of certain fundamentals of material emission behaviour. The influence of instrumentation and of aspects related to wave propagation on the detectability and evaluation of acoustic emission signals is considered.The conclusion reached is that at the present time acoustic emission can be used predominantly during hydrotests as a search method for cracks. Although some degree of characterization and sizing of defects may be obtained on the basis of empirical data, a quantitative evaluation of defect severity based on fracture mechanics cannot yet be made satisfactorily. It is expected that a considerable improvement in this respect may be achieved by applying a transfer correction that takes into account the depth position and directivity pattern of the source.The technique of leak detection by acoustic emission shows promising results permitting the location and quantification of leaks. Practical experience and future research work are expected to enhance the accuracy and detection sensitivity.