Special features of synthesis of a heat-resistant glass-ceramic coating

In order to protect Ni–Cr alloys from high-temperature corrosion, a new heat-resistant glass-ceramic coating was developed with a glass matrix synthesized on the basis of a composite R _x O–Al₂O₃–SiO₂–TiO₂ (R–Li^–, Na⁺, K⁺, Mg²⁺, Ca²⁺, Ba²⁺) system. The special features of the formation of crystalline phases in the glasses in heat treatment and the optimum regime for the formation of a glass ceramic structure are described.Translated from Steklo i Keramika, No. 3, pp. 30–32, March, 1996.     

Far-infrared pump-probe measurement of the lifetime of the 2p−1 shallow donor level in n-GaAs

The low temperature lifetime of electrons excited in the 2p^?1 donor level of n-GaAs has been studied in a far-infrared pump-probe experiment. The measurement has been carried out using a pulsed far-infrared molecular gas laser working at a wavelength of 292µm, with the sample in a magnetic field of 5.1 T, resonant with the 1s_o?2p^?1 transition. Two FIR pulses are sliced from one FIR-laser pulse by means of optical switching techniques using two Q-switched Nd:YAG lasers. The first pulse is used to saturate the transition, while the second pulse probes the return of the population in the excited state towards thermal equilibrium as a function of the time delay after the excitation pulse. The value of 350±50 ns found for the lifetime falls in line with CW saturation results on materials with other doping concentrations.     

VLSI chip set for 2D HDTV subband filtering with on-chip linememories

A chip set for 2D subband filtering of HDTV signals has been designed, fabricated and successfully tested. The two chips perform 10*14 quadrature mirror filtering for analysis filtering at the coder and synthesis filtering at the decoder. In order to achieve a very compact realization, the architectures utilize all a priori known properties of the filter algorithm. A 2D polyphase filter structure reduces the processing clock rate from the 72-MHz sampling rate to a moderate 18 MHz. The memory for vertical filtering is realized by on-chip parallel shift registers with multiphase clocking. A small silicon area for the filter arithmetic is achieved by application of carry save adder trees with fixed filter coefficients represented by canonical signed digits. A complete filterbank for luminance and chrominance signals consists of four identical chips, each with 450 000 transistors on 92 mm²     

The tone sense multiaccess protocols with partial collisiondetections (TSMA/PCD) for packet satellite communications

The tone sense multiaccess with partial collision detection (TSMA/PCD) protocol is particularly suitable for a packet satellite system serving an area with a dense population of earth stations. By incorporating a narrowband ground radio channel for broadcasting busy ones, the earth stations are able to avoid packet collisions by sensing for the absence of busy tones before transmitting packets. Partial collision detection capability can also be achieved. Single-tone TSMA/PCD gives 97% of the carrier-sense multiaccess with collision detection (CSMA/CD) throughput when N=10 tones are used, while for multitone and slot-by-slot announcement TSMA/PCD protocols only N=8 and N=2, respectively, are sufficient to drive the system to the CSMA/CD performance     

On basic definitions of unified fracture mechanics terminology

The adoption of unified fracture mechanics terminology (UFMT) will promote efficient communication between specialists in different fields of fracture research, harmonization of national and international standards relating to fracture mechanics, and last but not least improvement of the existing methodology for teaching and education in fatigue and fracture. In this paper the definitions of some basic and related terms included in different standards on fracture mechanics terminology are confronted with one another. Alternative definitions of the same terms are offered. By this strategy the author tries to show that the definitions of basic and related terms appropriate for the UFMT should emerge as a consequence of harmonizing a crack model with an actual crack and then both taken together with a fracture model, laboratory test methods, and failure assessment codes.Published in Problemy Prochonsti, No. 1, pp. 17–29, January, 1996.This paper is published as a matter of discussion.     

The effect of particle distribution on damage formation in particulate reinforced metal matrix composites deformed in compression

Image analysis results are reported on the generation of damage in particulate reinforced metal matrix composites during compressive deformation. The technique allows the automated collection of data on the incidence of particle fracture and void formation in the matrix as a function of important microstructural parameters such as local particle volume fraction and particle size. There is a strong relationship between damage and the local volume fraction of the reinforcement proving that damage formation is accentuated in regions of particle clustering. With the SiC reinforced materials examined, there was observed to be a change in dominance of damage mechanism from particle fracture at low local volume fractions to void formation in the matrix within strongly clustered regions. The results are compared with finite element (FE) modelling of the compressive deformation of clustered particles using a simple cluster of equi-spaced particles. The FE results suggest that plastic flow is generally inhibited in clustered regions. In certain highly clustered configurations shielding is such that flow does not occur in the heart of the cluster even at high levels of average plastic strain. The modelling suggests that the change in dominance of damage mechanism is related to the dramatic increase in tensile hydrostatic stresses in the matrix with higher levels of particle clustering.     

A dislocation shielding prediction of the toughness transition during cleavage of semibrittle crystals

An interconnected set of observations assesses current equilibrium models of the ductile-brittle-transition temperature (DBTT). This involvesin situ transmission electron microscopy (TEM) studies of crack-tip dislocations in single and polycrystals and bulk fracture toughness tests at various temperatures. Beyond K_I values of 8 MPa · m^1/2 in both iron-base single and polycrystals, large numbers of redundant dislocations are created, as postulated recently by Weertman. [38] Still, the necessary shielding dislocations, as required by equilibrium, can be detected at values as high as 20 and 40 MPa · m^1/2 byex situ TEM and electron channeling, respectively. In addition, the close approach of dislocations to the crack tip in some of the studies, as opposed to others, suggests that large dislocation free zones (DFZ) are a thin-film artifact. However, a failure criterion based partly on the Rice-Thomson model’21 is both consistent with the absence of a large DFZ and observed fracture toughness variations with test temperature. It is emphasized that this toughness transition is entirely in the semibrittle regime where cleavage is the failure mode. Nevertheless,K _lc values increase from 3 to 60 MPa·m^1/2 with an increase in test temperature. This article is based on a presentation made in the symposium “Quasi-Brittle Fracture” presented during the TMS fall meeting, Cincinnati, OH, October 21–24, 1991, under the auspices of the TMS Mechanical Metallurgy Committee and the ASM/MSD Flow and Fracture Committee.     

Arithmetic coding for data compression

Arithmetic coding provides an effective mechanism for removing redundancy in the encoding of data. We show how arithmetic coding works and describe an efficient implementation that uses table lookup as a first alternative to arithmetic operations. The reduced-precision arithmetic has a provably negligible effect on the amount of compression achieved. We can speed up the implementation further by use of parallel processing. We discuss the role of probability models and how they provide probability information to the arithmetic coder. We conclude with perspectives on the comparative advantages and disadvantages of arithmetic coding