Computer processing of artifact and arrhythmias in heart rate variability analysis.

Analysis of heart rate variability (HRV) with Holter monitoring is often difficult due to excessive artifacts and arrhythmias. While short sudden surges are treated successfully by most methods, slow heart rate (HR) variations, nocturnal trapezoidally-shaped HR increases and special types of arrhythmias which are similar to normal HRV fluctuations may distort further time domain and spectral analysis. This paper examines the advantages and disadvantages of different methods for preprocessing of HR data. We have developed the following approach to the analysis of HRV. (1) A combination method based on the absolute difference between HR values and both the last normal HR value and an updated mean is used for removal of artifacts and arrhythmias. This method can detect both sudden surges in HR values as well as longer periods of noise combined with slow normal variations. An additional stage of wild point removal is then optionally applied. (2) Certain special problems such as large T-waves, bigeminal rhythm, slow HR variations and nocturnal trapezoidally-shaped HR increases are also identified. Although none of the algorithms can be applied successfully to all cases, the final computer analysis for preprocessing described in the present study has proved to be superior to the simplified methods which are usually used and provides more suitable data for HRV analysis.     

Variable reluctance rotor structures-their influence on torqueproduction

Switched reluctance (SR) motors with differing structures are compared in terms of their torque prediction capabilities. The first structure is doubly salient with conventional laminations, also referred to as the CRS motor. The second has semiclosed stator slots and a cylindrical rotor with anisotropic magnetic properties arising from axial laminations interleaved with nonmagnetic material, also referred to as the CRR motor. The second structure has been claimed, on theoretical grounds, to be the superior structure in terms of torque per stator volume. The present comparison, based on RMS currents, concludes that the torque produced by the conventionally laminated motor is approximately 2.5 times that of the anisotropic design when the two copper losses are equalized. However, when the CRR motor has been optimized in terms of magnetic and electric loading, the CRS motor is still twice as torque productive. These results reverse the benefits previously claimed for the anisotropic motor design     

Spectral characterisation and frame synchronisation of optical fibre digital PPM

The discrete time decoding of data in pulse position modulation calls for accurate timing synchronisation, particularly at the frame rate. The spectral properties of optical fibre digital PPM are considered. An original expression is presented for predicting the spectrum and it is shown that, unlike satellite PPM, a component exists at the frame rate which may be used for timing extraction purposes. Further, it is illustrated that the modulation index can be used to enhance this component by up to 19 dB. This has been verified practically, with the results agreeing to within 1 dB of those predicted from the original expression presented.<>     

Fourier-transform-limited pulses from gain-switched distributed-Bragg-reflector lasers using simultaneous modulation of gain and phase sections

Fourier-transform-limited pulses ( Delta tau . Delta nu approximately=0.35) have been obtained from a microwave-modulated DBR laser at 1.56 mu m. The chirp of the gain-switched pulse is compensated for by applying a fraction of the microwave signal to the phase section, thereby creating an instantaneous frequency shift of opposite sign. The generation of short coherent pulses from such a monolithic source can be of great interest for long haul soliton transmission.<>     

Analysis of slots in nonradiating dielectric waveguide using the modal expansion method

A modal expansion method is used with the reciprocity and Poynting theorems to derive the admittance of inclined slots cut in the metal wall of a nonradiating dielectric (NRD) waveguide. Theoretical values of normalised conductance and susceptance are compared with previously reported experimental results and are found to be in good agreement.<>     

A hybrid wafer-dicing process for GaAs MMIC production

A dicing process for GaAs MMIC (monolithic microwave integrated circuit) wafers using spin-on wax for wafer mounting and a hybrid process of wet chemical etching/mechanical sawing for chip dicing is described. This process minimizes ragged chip edges and reduces generation of microcracks in addition to the elimination of the plated gold burrs on the backside of the diced MMIC chips. This process gives a uniformity of -3 μm across a 2-in wafer following the completion of the whole backside process. This GaAs chip dicing technique is amenable to production because it exhibits both a very high chip yield (>90%) and nearly flawless edges     

Adaptive nonlinear cancellation for high-speed fiber-optic systems

The authors propose techniques for adaptive nonlinear cancellation of intersymbol interference (ISI) in the electrical signal at the receiver in Gb/s lightwave systems and describe several demonstrations of these techniques. Techniques for adjustable nonlinear cancellations are discussed and demonstrations of these techniques using commercially available integrated circuits (ICs) at data rates as high as 1.7 Gb/s are described. Techniques for automatic adjustment are discussed, and a demonstration of adaptive nonlinear cancellation at 450 Mb/s is described. The authors discuss how these techniques can be integrated onto the detector IC for operations at 2.5 Gb/s and higher data rates. These techniques allow a single IC detector with adaptive nonlinear cancellation to be used in long-haul and undersea lightwave systems to optimize the detector threshold and compensate for the ISI     

New wire interface for graded 3-D TLM

A new 3-D graded TLM model for thin radiating wires is presented. The model differs from previous TLM models because the wire is modelled at the interfaces between cells, rather than through the centre of the node. The connection between the TLM symmetrical condensed-node link lines and the line forms a 'wire interface'. The scattering algorithm for the interface and simulation results are given.<>     

Performance of 1700 m2 solar pond operation in arid zone

A 1700 m² solar pond was constructed in the desert of Kuwait where severe weather conditions prevail in all seasons. The paper describes in detail a diffuser design for the gradient establishment, gradient stability, and thermal performance of the pond. The main problem encountered in operating the pond was mixing between the upper zone and the gradient zone, even when the wind speed was as low as 5 m/s. No mixing between the gradient and the lower connective zone was observed. The wind effect was severe in causing mixing even when the upper convective zone increased to 0.90 m.