N-Type Field-Effect Transistors Using Multiple Mg-Doped ZnO Nanorods

Nanorod field-effect transistors (FETs) that use multiple Mg-doped ZnO nanorods and a SiO₂ gate insulator were fabricated and characterized. The use of multiple nanorods provides higher on-currents without significant degradation in threshold voltage shift and subthreshold slopes. It has been observed that the on-currents of the multiple ZnO nanorod FETs increase approximately linearly with the number of nanorods, with on-currents of ~1 muA per nanorod and little change in off-current (~4times10^-12). The subthreshold slopes and on-off ratios typically improve as the number of nanorods within the device channel is increased, reflecting good uniformity of properties from nanorod to nanorod. It is expected that Mg dopants contribute to high n-type semiconductor characteristics during ZnO nanorod growth. For comparison, nonintentionally doped ZnO nanorod FETs are fabricated, and show low conductivity to compare with Mg-doped ZnO nanorods. In addition, temperature-dependent current-voltage characteristics of single ZnO nanorod FETs indicate that the activation energy of the drain current is very low (0.05-0.16 eV) at gate voltages both above and below threshold     

An Inductively Coupled Lamb Wave Transducer

Wafer-type piezoelectric transducers are effective transducers for the excitation and detection of ultrasonic Lamb waves in plate-like structures. Such transducers are, however, vulnerable to corrosion and physical damage when mounted in exposed locations. In this paper we describe an inductively coupled Lamb wave transducer that eliminates the need for direct electrical connections. Signals are coupled into and out of the transducer using two probe coils. In this paper we explore the operation of inductively coupled transducers both analytically and experimentally. Finite-element analysis is used to determine inductances and the coupling constant, and electrical circuit analysis to determine the transfer function and its dependence on the gap between the probe coils and the transducer. Experiments show that return signals of millivolt amplitude are obtained when the transducer is excited with 10-V amplitude pulses. These transducers are suitable for permanent mounting on structures to be monitored for cracks or flaws     

Thermoelectric Converters of Human Warmth for Self-Powered Wireless Sensor Nodes

Solar cells are the most commonly used devices in customer products to achieve power autonomy. This paper discusses a complementary approach to provide power autonomy to devices on a human body, i.e., thermoelectric conversion of human heat. In indoor applications, thermoelectric converters on the skin can provide more power per square centimeter than solar cells, particularly in adverse illumination conditions. Moreover, they work day and night. The first sensor nodes powered by human heat have been demonstrated and tested on people in 2004-2005. They used the state-of-the-art 100-muW watch-size thermoelectric wrist generators fabricated at IMEC and based on custom-design small-size BiTe thermopiles. The sensor node is completed with a power conditioning module, a microcontroller, and a wireless transceiver mounted on a watchstrap     

Vehicle Localization Using Sensors Data Fusion Via Integration of Covariance Intersection and Interval Analysis

Achieving an innovative integrated sensor fusion architecture with a robust vehicle navigation and localization using an extended Kalman filter, interval analysis and covariance intersection that can overcome the uncertainty in the system model and sensor noise statistics. There are various approaches to the problem, but here the focus is on an approach which can guaranteed performance of sensor-based navigation. The guaranteed performance is quantified by explicit bounds of position estimate of a ground vehicle. Ground vehicles generally carry dead reckoning sensors such as wheel encoders and inertial sensors, to measure acceleration and angle rate, while obstacle detection and mapmaking is done with time-of-flight ultrasonic sensors. Most of these sensors give overlapping or complementary information and sometimes are redundant as well, which offers scope for exploiting data fusion. The purpose here is to achieve data fusion for ground vehicles with low-cost sensors by forming an intelligent sensor system. This is accomplished by combining the sensors' measurements and processing these measurements with data fusion algorithms. The algorithms are complementary in the sense that they compensate for each other's limitations, so that the resulting performance of the sensor system is better than its individual components.     

Interlaboratory ring test of time-resolved fluoroimmunoassays for zeranol and alpha-zearalenol and comparison with zeranol test kits.

Many zeranol immunoassay test kits cross-react with toxins formed by naturally occurring Fusarium spp. fungi, leading to false-positive screening results. This paper describes the evaluation and application of recently published, dry reagent time-resolved fluoroimmunoassays (TR-FIA) for zeranol and the toxin alpha-zearalenol. A ring test of bovine urine fortified with zeranol and/or alpha-zearalenol in four European Union National Reference Laboratories demonstrated that the TR-FIA tests were accurate and robust. The alpha-zearalenol TR-FIA satisfactorily quantified alpha-zearalenol in urine fortified at 10-30 ng ml(-1). The specificity-enhanced zeranol TR-FIA accurately quantified zeranol in the range 2-5 ng ml(-1) and gave no false-positive results in blank urine, even in the presence of 30 ng ml(-1) alpha-zearalenol. Zeranol TR-FIA specificity was demonstrated further by analysing incurred zeranol-free urine samples containing natural Fusarium spp. toxins. The TR-FIA yielded no false-positive results in the presence of up to 22 ng ml(-1) toxins. The performance of four commercially available zeranol immunoassay test kits was more variable. Three kits produced many false-positive results. One kit produced only one potential false-positive using a protocol that was longer than that of the TR-FIA. These TR-FIAs will be valuable tools to develop inspection criteria to distinguish illegal zeranol abuse from contamination arising from in vivo metabolism of Fusarium spp. toxins.     

Granular gases in mechanical engineering: on the origin of heterogeneous ultrasonic shot peening

The behavior of an ultrasonic shot peening process is observed and analyzed by using a model of inelastic hard spheres in a gravitational field that are fluidized by a vibrating bottom wall (sonotrode) in a cylindrical chamber. A marked heterogeneous distribution of impacts appears when the collision between the shot and the side wall becomes inelastic with constant dissipation. This effect is one order of magnitude larger than the simple heterogeneity arising from boundary collision on the cylinder. Variable restitution coefficients bring the simulation closer to the general observation and allow the investigation of peening regimes with changing shot density. We compute within this model other physical quantities (impact velocities, impact angle, temperature and density profile) that are influenced by the number N of spheres.     

Reconstruction of radiation situation at Chernobyl NPP service area on the basis of γ-ray spectrometric analysis of soil samples and published data

Reconstruction of the radiation situation in areas subjected to nuclear accidents was done with an example of the Chernobyl accident (1986) on the basis of the radionuclidic composition of soil samples. The radionuclidic composition of γ-emitters was determined 19 years after the accident in a pulverescent sandstone sample collected in July 1986 at a distance of 1.5 km from the 4th block. Using reference data and data from original papers, reconstruction of the radionuclidic composition of the sample is done on the first ten days after the accident, and possible variations of the γ-radiation dose rate were determined within the framework of the thin film model. Based on the results obtained, variations of the absorbed dose of γ-radiation in 10 days are estimated, which is necessary for making urgent decisions in the initial period after the accident. The results are well consistent with the published data on the dose rates, validating the decision on evacuation of the people from Pripyat town and from the 30-km exclusion zone.     

Family-Responsive Interventions, Perceived Organizational and Supervisor Support, Work-Family Conflict, and Psychological Strain.

This study examined organizational family-responsive policies, perceptions of the organization as family supportive, and supervisor support as issues that may be salient to the experience of conflict between paid employment (work) and family roles. Data were collected from 355 managerial personnel in New Zealand. Although work-family conflict and psychological strain were strongly linked, the availability of organizational policies had no significant association with levels of conflict or strain, whereas policy usage was related only to work-to-family interference and not to family-to-work interference. On the other hand, perceptions of the organization as family supportive and supervisor support for work-family balance displayed significant relationships with key variables, highlighting the importance of these variables for interventions designed to ameliorate the negative impact of work-family conflict on managerial well-being. Implications for the effective implementation of family-responsive interventions are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Behaviour of ±45° glass/epoxy filament wound composite tubes under quasi-static equal biaxial tension–compression loading: experimental results

The primary aim of this paper is to present results describing in detail the behaviour of ±45° E-glass/MY750 (GRP) tubes, of various wall thicknesses, subjected to equal biaxial tension–compression loading, generated under combined internal pressure and axial compression. The role played by the non-linear lamina shear has also been assessed by comparing various shear stress–strain curves for embedded laminae (extracted from tests on ±45° tubes subjected to circumferential: axial stress ratios SR=1:0, 1:−1 and 2.3:−1) with that of an ‘isolated’ lamina (measured from torsion of 90° tubes). Extracted shear failure strains, for embedded laminae, were more than four fold larger than those measured at ultimate failure for an ‘isolated’ lamina. Soft characteristics were observed in the embedded lamina and these were believed to be due to interaction between early matrix damage initiation (and propagation) and shear. Factors affecting the behaviour of the tubes, such as bulging, scissoring, thermal stresses and stress variation through the thickness are discussed.