导体-介质组合体散射分析两种积分方程法比较

采用耦合积分方程和单积分方程两种方法,分析了三维导体-介质组合体目标的电磁散射问题.与传统的耦合积分方程法相比,单积分方程法使介质体表面的未知量数目减少一半,并且能获得更快的迭代解.讨论了导体-介质交界线上RWG基函数的正确处理问题.对介质锥-导体柱组合体、导体-介质组合球和某导弹模型的雷达截面(RCS)进行了计算和比较,验证了两种积分方程方法的正确性,且数值结果表明单积分方程法更加有效.     

Discrete-time sliding mode control for uncertain systems with state and input delays

This article presents a discrete-time sliding mode control method for the robust stabilisation of linear uncertain multi-input discrete-time systems with state and input delays. The systems are assumed to have structured mismatched time-varying parameter uncertainties. A specified switching surface is proposed and a sliding mode controller is derived to ensure the existence of the quasi-sliding mode. Based on the improved Lyapunov function and linear matrix inequality technique, delay-independent sufficient conditions for the design of a stable switching surface are given and the stability of the overall closed-loop system is guaranteed. Neither chattering phenomenon will occur nor the knowledge of upper bound of uncertainties is required. Finally, simulation results demonstrate the efficacy of the proposed control methodology.     

A group decision classifier with particle swarm optimization and decision tree for analyzing achievements in mathematics and science

Group decision making is a multi-criteria decision-making method applied in many fields. However, the use of group decision-making techniques in multi-class classification problems and rule generation is not explored widely. This investigation developed a group decision classifier with particle swarm optimization (PSO) and decision tree (GDCPSODT) for analyzing students’ mathematic and scientific achievements, which is a multi-class classification problem involving rule generation. The PSO technique is employed to determine weights of condition attributes; the decision tree is used to generate rules. To demonstrate the performance of the developed GDCPSODT model, other classifiers such as the Bayesian classifier, the k-nearest neighbor (KNN) classifier, the back propagation neural networks classifier with particle swarm optimization (BPNNPSO) and the radial basis function neural networks classifier with PSO (RBFNNPSO) are used to cope with the same data. Experimental results indicated the testing accuracy of GDCPSODT is higher than the other four classifiers. Furthermore, rules and some improvement directions of academic achievements are provided by the GDCPSODT model. Therefore, the GDCPSODT model is a feasible and promising alternative for analyzing student-related mathematic and scientific achievement data.     

Cerebral blood flow velocity and vasomotor reactivity before and after shunting surgery in patients with normal pressure hydrocephalus

The purpose of this study was to evaluate pre- and post-shunting haemodynamic changes and their correlation with the clinical results in normal pressure hydrocephalus (NPH). Accordingly, eleven demented patients with clinical signs suggestive of NPH received examinations of cerebral blood flow velocity (BFV) and vasomotor reactivity (VMR) by transcranial Doppler sonography with carbogen testing before and after shunt treatment. Computerized tomography (CT), clinical assessment and neuropsychological grading were performed prior to and at 3 months following surgery. A control group consisting of 10 patients was included to establish baseline data. The pre-operative CBF studies in the anterior cerebral artery (ACA) and the middle cerebral artery (MCA) revealed the NPH patients did not have significant decreases of BFVs, but had significant decreases of carbogen VMR (P < 0.05). After shunting, there were no significant changes of the BFVs as compared with the pre-shunting data. The post-shunting VMR of the ACA was significantly higher than the pre-shunting one (p < 0.05), but there was no variation in that of the MCA. Both the values of post-shunting VMR in ACA and the post-shunting increase in VMR in MCA of the 7 shunt-responsive patients who improved mentally and in other symptoms were significantly higher than those of patients without improvement (p < 0.05). In addition, the five patients with gait improvement showed significantly higher values of post-shunting VMR of ACA and the post-shunting increase of VMR for both ACA and MCA when compared with those patients without gait improvement (p < 0.05, respectively). Our study supports the view that patients with NPH had various degrees of impaired VMR in both the ACA and the MCA, but showed insignificant reduction in BFVs, indicating a compensatory mechanism of CBF over time to accommodate the subnormal state of cerebral perfusion pressure. Shunt placement would improve the VMR in responsive patients. Postoperatively, an increase of VMR tends to accompany improvement of the functional state: that in the MCA alone is associated with symptomatic improvement in mental function and that increase in VMR in both the ACA and the MCA with improvement in gait, respectively.     

The effect of mischmetal addition on the structure and mechanical properties of a cast Al-7Si-0.3Mg alloy containing excess iron (up to 0.6 Pct)

The effect of Fe content (0.2 to 0.6 pct) on the microstructure and mechanical properties of a cast Al-7Si-0.3Mg (LM 25/356) alloy has been investigated. Further, 1 pct mischmetal (MM) additions (a mixture of rare-earth (RE) elements) were made to these alloys, and their mechanical properties at room and at elevated temperatures (up to 200 °C) were evaluated. A structure-property correlation on this alloy was attempted using optical microstructure analysis, fractographs, X-ray diffraction, energy-dispersive analysis of X-rays (EDX), and quantitative metallography by image analysis. An increase in Fe content increased the volume percentage of Fe-bearing intermetallic compounds (β and π phases), contributing to the loweryield strength (YS), ultimate tensile strength (UTS), percentage elongation, and higher hardness. An addition of 1 pct MM to the alloys containing 0.2 and 0.6 pct Fe was found to refine the microstructure; modify the eutectic silicon and La, Ce, and Nd present in the MM; form different intermetallic compounds with Al, Si, Fe, and Mg; and improve the mechanical properties of the alloys both at room and elevated temperatures.     

Synthesis and characterization of bifunctional β-MnO2-based Pt/C photoelectrochemical cell for hydrogen production

A manganese dioxide (β-MnO₂) photocatalyst for light-induced water splitting and hydrogen generation is studied via the impregnation and heat treatment method. The phase and fluorescence characterizations are examined by X-ray diffraction (XRD) and photoluminescence. A series of peaks for its (110) and (200) planes are identified as those for pure β-MnO₂ crystals with lattice spacings of 3.11 and 2.19 Å, respectively. The photoluminescence shows that the primary signals are located in the blue-violet spectral region, corresponding to the band-edge emission of β-MnO₂ (376 nm). Furthermore, two types of photoelectrochemical cell with added Pt are constructed to compare hydrogen production rates. A significant enhancement of light-induced hydrogen generation by water splitting is observed on Pt/β-MnO₂/C, with a hydrogen generation rate of 194.67 μmol cm⁻¹ h⁻¹, greater than that on a Pt/TiO₂/C photocatalyst, which can be attributed to the effective inhibiting of CO poisoning, thus maintaining the catalyst's surface area in methanol oxidation.     

On-line SPC with consideration of learning curve

This work identifies a link between on-line statistical process control (SPC) and the learning effect for the process standard deviation (PSD) caused by the quality improvement (QI) program. The learning curve (LC) is used to describe and forecast, and the exponentially weighted root mean square control chart is used to monitor the progress in reducing PSD. A modification of the quality control chart (QCC) that considers LC of PSD is proposed. The reduction rate of PSD may be large during the initial stage of the QI program, and influences QCC construction. Simulation is used to compare the shift-detecting ability of the Shewhart- control chart and EWMA- control chart, without- and with- consideration of LC. The EWMA- chart with consideration of LC performs best. In comparison, the Shewhart- chart without LC consideration has almost no shift-detecting ability when the shift magnitude of the process mean is small, leading to rendering quality control ineffective.     

直流±250 kV海底电缆J型管段载流量提升研究北大核心CSCD

J型管作为新型电力系统中新能源海上风电送出系统海底电缆的保护装置,其存在会阻碍海缆对外散热,制约整条风电送出线路的载流量。为了提高J型管段海缆载流量,文中建立了典型J型管段流体—温度耦合数值模型,仿真分析了环境风速、太阳辐射、环境温度对直流±250 kV海底电缆封闭J型管系统温度场的影响规律,确定J型管载流量瓶颈位置,提出了一种J型管外壁开孔配合平台开孔引入外界风的J型管载流量提升方法,验证了仿真模型与算法的正确性。结果表明与全封闭J型管系统相比,J型管外壁开孔配合平台开孔能有效降低海缆温度,环境风速较低为1 m/s时载流量可有效提升13.98%。研究结果为指导J型管设计提升J型管段海缆载流量提供了新的解决方案。     

Quantitative analysis of the ankle strategy under translational platform disturbance.

The ankle strategy is one of the postural adjustment maneuvers humans utilize when the support platform is disturbed. This paper presents a quantitative analysis of the ankle strategy. A three-link sagittal biped model is considered. The first link represents the two legs locked together. The second link represents the two thighs locked together. The third link represents the hip, the torso, the upper limbs, the neck, and the head. The dynamics, control, and stability of the three-link biped, under platform translation, are considered. The disturbance of the platform is represented as an input and the effect of the muscular system is reduced to a set of torques applied to the joints and across the joints. Two digital computer simulations are presented to demonstrate the behavior of the biped under backward or forward platform disturbance. The simulations are compared with experimental measurements of humans subjected to postural disturbances. It is shown that the effect of a horizontal disturbance at the ankle appears to be about 40 times that of the effect of the disturbance at the knees and at least a few hundred times larger than the effect of a disturbance at the hip. This means that, under translational platform disturbance, the ankle angle is subjected to the largest excursion. The knee and the hip angle excursions are relatively minor. Consequently, the biped, as a whole, appears to move as a single inverted pendulum. Major postural corrections are initiated by the ankle excursion. Further, when the available ankle torque is limited or nonexistent, the stability requires resorting to the knee or hip strategies.