Studies on microbridges of superconducting YBCO thin film

Critical current densities of the superconducting Y-Ba-Cu-O (YBCO) films have been observed to decrease with the increase of power of microwave radiation. Presence of Josephson type of junctions in the microbridges has been established from the microwave irradiation and magnetic field studies. BCS energy gap parameter (2/kT _c ) has been calculated from thedI/dV characteristics and found to be 3.7 at 13 K.     

Multi‐response optimization and empirical modeling of cardiopulmonary responses during manual lifting tasks

An experimental study involving five independent lifting variables (namely weight, lift frequency, horizontal distance from the object, operator, and vertical distance) and their interactions was conducted using the Taguchi L₂₇ design. Two responses—heart rate and oxygen uptake—were measured during each trial. To optimize both responses simultaneously, the signal‐to‐noise ratio was normalized to obtain a multi‐response signal‐to‐noise (MRSN) ratio for each trial. The MRSN ratio was analyzed using analysis of variance to identify the optimal condition in which both responses were optimized at the same time. Lift frequency was found to be the most significant factor, and operator and horizontal distance were found to be least significant. The empirical modeling equation was developed and can be used to predict the response values during experimental trials involving similar work conditions. © 2010 Wiley Periodicals, Inc.     

Affine-based registration of CT and MR modality images of human brain using multiresolution approaches: comparative study on genetic algorithm and particle swarm optimization

We present a non-linear 2-D/2-D affine registration technique for MR and CT modality images of section of human brain. Automatic registration is achieved by maximization of a similarity metric, which is the correlation function of two images. The proposed method has been implemented by choosing a realistic, practical transformation and optimization techniques. Correlation-based similarity metric should be maximal when two images are perfectly aligned. Since similarity metric is a non-convex function and contains many local optima, choice of search strategy for optimization is important in registration problem. Many optimization schemes are existing, most of which are local and require a starting point. In present study we have implemented genetic algorithm and particle swarm optimization technique to overcome this problem. A comparative study shows the superiority and robustness of swarm methodology over genetic approach.     

Differential regulation of redox proteins and chaperones in HbEβ-thalassemia erythrocyte proteome

Purpose: In (hemoglobin, Hb) HbEβ‐thalassemia, HbE (β‐26 Glu→Lys) interacts with β‐thalassemia to produce clinical manifestation of varying severity. This is the first proteomic effort to study changes in protein levels of erythrocytes isolated from HbEβ‐thalassemic patients compared to normal. Experimental design: We have used 2‐DE and MALDI‐MS/MS‐based techniques to investigate the differential proteome profiling of membrane and Hb‐depleted fraction of cytosolic proteins of erythrocytes isolated from the peripheral blood samples of HbEβ‐thalassemia patients and normal volunteers. Results: Our study showed that redox regulators such as peroxiredoxin 2, Cu‐Zn superoxide dismutase and thioredoxin and chaperones such as α‐hemoglobin stabilizing protein and HSP‐70 were upregulated in HbEβ‐thalassemia. We have also observed larger amounts of membrane associated globin chains and indications of disruption of spectrin‐based junctional complex in the membrane skeleton of HbEβ‐thalassemic erythrocytes upon detection of low molecular weight fragments of β‐spectrin and decrease in β‐actin and dematin content. Conclusion and clinical relevance: We have observed interesting changes in the proteomic levels of redox regulators and chaperons in the thalassemic hemolysates and have observed strong correlation or association of the extent of such proteomic changes with HbE levels. This could be important in understanding the role of HbE in disease progression and pathophysiology.     

Surface modes of a sessile water drop: an optical tweezer based study

A high-precision method to study the dynamics of two-fluid interfaces using an optical tweezer and a phase-sensitive detection technique are described. The disturbances set up at the interface are studied by analyzing the motion of an optically trapped particle in the bulk of the fluid, i.e., away from the interface. The usefulness of the technique is demonstrated for the well-known problem of a horizontally vibrated sessile liquid drop. The vibrational modes of the liquid drop excited by sinusoidally vibrating the support in a horizontal plane appear as resonances in the motion of the trapped particle. The nature of the resonance is studied in detail by measuring the real part, the imaginary part, and the phase response of the motion of the particle as a function of the "effective" size of the liquid drop. Excellent quantitative agreement with the theoretically predicted values of the eigenfrequencies and damping of the surface modes is obtained.     

A 3-GHz 70-mb SRAM in 65-nm CMOS technology with integrated column-based dynamic power supply

Column-based dynamic power supply has been integrated into a high-frequency 70-Mb SRAM design that is fabricated on a high-performance 65-nm CMOS technology. The fully synchronized design achieves a 3-GHz operating frequency at 1.1-V power supply. The power supply at SRAM cell array is dynamically switched between two different voltage levels during READ and WRITE operations. Silicon measurement has proven this method to be effective in achieving both good cell READ and WRITE margins, while lowering the overall SRAM leakage power consumption.     

Influence of Cl-, Br-, NO 3 - and SO 4 2- ions on the corrosion behaviour of 6061 Al alloy

The effects of anions like Cl^-, Br^-, NO ₃ ^- and SO ₄ ^2- on the anodic dissolution of the monolithic Al 6061 alloy have been investigated at neutral pH through immersion testing and electrochemical techniques like potentiodynamic polarization and a.c. impedance spectroscopy. Scanning electron microscopy was employed to characterize the corroded surface and to observe the extent of pitting in different media. From the evaluated corrosion parameters it was found that the dissolution of the matrix was extensively reduced in presence of aqueous solutions containing Br^-, NO ₃ ^- and SO ₄ ^2- ions while Cl^- ions aggravated corrosion by penetrating into the barrier oxide film on the surface of the material. Pronounced effect of pitting was observed in presence of Cl^- and the level of pitting in NO ₃ ^- and Br^- were mild. In presence of SO ₄ ^2- ions passivity was extended over a wide potential range and breakdown of passivity occurs when the material was polarized beyond pitting potential. The departure of capacitive behaviour towards resistive behaviour was clearly observed through impedance measurements when investigations were conducted in Cl^- media and in presence of the other electrolytes. Corrosion rates were, however, controlled during prolonged exposure in the electrolytic media, specially in case of chloride media, due to the predominance of film repair kinetics.     

Efficient algorithms for single- and two-layer linear placement of parallel graphs

This paper outlines an algorithm for optimum linear ordering (OLO) of a weighted parallel graph with O(n log k) worst-case time complexity, and O(n + k log(n/k) log k) expected-case time complexity, where n is the total number of nodes and k is the number of chains in the parallel graph. Next, the two-layer OLO problem is considered, where the goal is to place the nodes linearly in two routing layers minimizing the total wire length. The two-layer problem is shown to subsume the maxcut problem and a befitting heuristic algorithm is proposed. Experimental results on randomly generated samples show that the heuristic algorithm runs very fast and outputs optimum solutions in more than 90% instances.     

A New Classification of Path-Delay Fault Testability in Terms of Stuck-at Faults

A new classification of path-delay fault testability in a combinational circuit is presented in terms of testability of stuck-at faults in an equivalent circuit. Earlier results describing correlation of path-delay and stuck-at faults are either incomplete, or use a complex model of equivalent circuit based on timing parameters. It is shown here that a path-delay fault (rising or falling) is testable if and only if certain single or multiple stuck-at fault in the equivalent circuit is testable. Thus, all aspects of path-delay faults related to testability under various classification schemes can be interpreted using the stuck-at fault model alone. The results unify most of the existing concepts and provide a better understanding of path-delay faults in logic circuits.