A study on a multi-stage hybrid gasifier-engine system

This paper presents the results of a study on a multi-stage hybrid biomass–charcoal gasification to produce low tar content gas for engine application using coconut shell as a fuel. The performance of a gasifier-engine system consisting of the hybrid biomass–charcoal gasifier, a gas cleaning/cooling system and a diesel engine is also discussed.

The lowest tar content found in hybrid coconut shell-charcoal gasification was 28 mgNm⁻³. Using a spray tower, producer gas could be cooled down to 40°C; almost tar-free gas was obtained after cooling the producer gas from the hybrid gasifier system. A three-cylinder Perkins diesel engine was tested at a constant speed of 1500 rpm on diesel alone and dual fuel modes of operation. A maximum of 81% of the total heat energy input was replaced by the producer gas at an electricity generation of 11.44 kWe.     

Renewable energy education at the university level

The rapid growth in global enrolment of students for higher education observed in recent decades is expected to continue in the early next century. However, the role of the universities and their approach to education may undergo substantial transformation in the future. The Internet is expected to play a significant role in university-level education in general and renewable energy education (REE) in particular. Currently, REE at different universities is characterized by a lack of uniformity in terms of duration, coursework, emphasis on research, etc. There is a need to establish guidelines and standards regarding academic programs and to establish a system of accreditation, preferably global, of REE in different academic disciplines and departments.     

Submicron scaling of HBTs

The variation of heterojunction bipolar transistor (HBT) bandwidth with scaling is reviewed. High bandwidths are obtained by thinning the base and collector layers, increasing emitter current density, decreasing emitter contact resistivity, and reducing the emitter and collector junction widths. In mesa HBTs, minimum dimensions required for the base contact impose a minimum width for the collector junction, frustrating device scaling. Narrow collector junctions can be obtained by using substrate transfer or collector-undercut processes or, if contact resistivity is greatly reduced, by reducing the width of the base ohmic contacts in a mesa structure. HBTs with submicron collector junctions exhibit extremely high f_max and high gains in mm-wave ICs. Transferred-substrate HBTs have obtained 21 dB unilateral power gain at 100 GHz. If extrapolated at -20 dB/decade, the power gain cutoff frequency f_max is 1.1 THz. f_max will be less than 1 THz if unmodeled electron transport physics produce a >20 dB/decade variation in power gain at frequencies above 110 GHz. Transferred-substrate HBTs have obtained 295 GHz f_T. The substrate transfer process provides microstrip interconnects on a low-ϵ_r polymer dielectric with a electroplated gold ground plane. Important wiring parasitics, including wiring capacitance, and ground via inductance are substantially reduced. Demonstrated ICs include lumped and distributed amplifiers with bandwidths to 85 GHz and per-stage gain-bandwidth products over 400 GHz, and master-slave latches operating at 75 GHz     

Deformation behavior of a Ni3Al(B,Zr) alloy during cold rolling: Part I. changes in order and structure

A hypostoichiometric Ni₃Al(B,Zr) alloy was homogenized and cold rolled by amounts ranging from 25 to 73 pct. The alloy consisted of two phases—a partially ordered γ′ phase (L1₂) and a Ni-rich fcc solid solution (γ). On deforming the alloy by rolling at room temperature, the order parameter showed a gradual change. In fact, between 35 and 45 pct deformation, the order characteristic of the L1₂ structure changed into that of a DO₂₂ structure. The possibility of transition from L1₂ to DO₂₂ structure is also corroborated from strain parameter, microhardness, and detailed x-ray diffraction (XRD) measurements. This structural transformation is accompanied by a change in the deformation mode (from slip to twinning), as is evident from the relevant microstructures.     

Premature fatigue failure of a spring due to quench cracks

The premature fatigue failure of a compression spring during service has been analysed. Optical and scanning electron microscopy, hardness and tensile testing and X-ray diffraction techniques were employed. Quench cracks, presumably due to improper quenching, were observed across the cross-section of the spring. It is established theoretically that the diameter of the spring rod was smaller than the critical diameter for this composition of steel. X-ray diffraction showed the presence of a small amount of retained austenite (average grain size of 2 μm).     

Inside the Frontier Areas of Research in Physics: A Micro Level Analysis

In an earlier study, a methodology was described for identifying Frontier Areas in a research field, i.e., areas which experienced in a particular time period significant increase in research output in comparison to a preceding time period. The application of this methodology was shown by identifying Frontier Areas of research in Physics in 1995. Comparison was done with respect to the outputs in different areas in 1990. Profiles of countries active in the identified Frontier Areas were then constructed.In this paper, attempt is made to reveal the active research topics/themes within these Frontier Areas in 1990 and 1995. The active research topics, which are uncovered, are classified as Frontier Topics. Countries active in these frontier topics are distinguished in each time period. Association among countries and Frontier Topics are observed using the multivariate technique of correspondence analysis. Dynamics are observed by analysing the changes in the profiles of the countries in the two time periods. Results and implications of this study for decision-making and as a policy tool are highlighted.     

Identifying the Metabolic Signatures of PPARD-Overexpressing Gastric Tumors

Peroxisome proliferator-activated receptor delta (PPARD) is a nuclear receptor known to play an essential role in regulation of cell metabolism, cell proliferation, inflammation, and tumorigenesis in normal and cancer cells. Recently, we found that a newly generated villin-PPARD mouse model, in which PPARD is overexpressed in villin-positive gastric progenitor cells, demonstrated spontaneous development of large, invasive gastric tumors as the mice aged. However, the role of PPARD in regulation of downstream metabolism in normal gastric and tumor cells is elusive. The aim of the present study was to find PPARD-regulated downstream metabolic changes and to determine the potential significance of those changes to gastric tumorigenesis in mice. Hyperpolarized [1-¹³C] pyruvate magnetic resonance spectroscopy, nuclear magnetic resonance spectroscopy, and liquid chromatography-mass spectrometry were employed for metabolic profiling to determine the PPARD-regulated metabolite changes in PPARD mice at different ages during the development of gastric cancer, and the changes were compared to corresponding wild-type mice. Nuclear magnetic resonance spectroscopy-based metabolomic screening results showed higher levels of inosine monophosphate (p = 0.0054), uracil (p = 0.0205), phenylalanine (p = 0.017), glycine (p = 0.014), and isocitrate (p = 0.029) and lower levels of inosine (p = 0.0188) in 55-week-old PPARD mice than in 55-week-old wild-type mice. As the PPARD mice aged from 10 weeks to 35 weeks and 55 weeks, we observed significant changes in levels of the metabolites inosine monophosphate (p = 0.0054), adenosine monophosphate (p = 0.009), UDP-glucose (p = 0.0006), and oxypurinol (p = 0.039). Hyperpolarized [1-¹³C] pyruvate magnetic resonance spectroscopy performed to measure lactate flux in live 10-week-old PPARD mice with no gastric tumors and 35-week-old PPARD mice with gastric tumors did not reveal a significant difference in the ratio of lactate to total pyruvate plus lactate, indicating that this PPARD-induced spontaneous gastric tumor development does not require glycolysis as the main source of fuel for tumorigenesis. Liquid chromatography-mass spectrometry-based measurement of fatty acid levels showed lower linoleic acid, palmitic acid, oleic acid, and steric acid levels in 55-week-old PPARD mice than in 10-week-old PPARD mice, supporting fatty acid oxidation as a bioenergy source for PPARD-expressing gastric tumors.     

Efficient electrooptic modulator in InGaAlAs/InP optical waveguides

A single heterostructure InGaAlAs/InP phase modulator utilizing the quadratic electrooptic effect (QEO) is reported for the first time. The calculated value of the QEO coefficient from the measurements is 3.7×10^-19 m²/V² at 80 meV below the band edge. In addition, the linear electrooptic effect (LEO) coefficient is estimated to be 1.2×10^-12 m/V, which is comparable to that of GaAs. The propagation loss of a single mode ridge waveguide is in the range of 1.5-1.7 dB/cm, which is better than the previously reported value in this material system. The measured single mode phase shifts are 5.5 and 2.8°/V mm for TE and TM polarizations, respectively. These values are the largest reported so far in an InGaAlAs system     

Absorption, carrier lifetime, and gain in InAs-GaAs quantum-dot infrared photodetectors

Quantum-dot infrared photodetectors (QDIPs) are being studied extensively for mid-wavelength and long-wavelength infrared detection because they offer normal-incidence, high-temperature, multispectral operation. Intersubband absorption, carrier lifetime, and gain are parameters that need to be better characterized, understood, and controlled in order to realize high-performance QDIPs. An eight-band k/spl middot/p model is used to calculate polarization-dependent intersubband absorption. The calculated trend in absorption has been compared with measured data. In addition, a Monte-Carlo simulation is used to calculate the effective carrier lifetime in detectors, allowing the calculation of gain in QDIPs as a function of bias. The calculated gain values can be fitted well with experimental data, revealing that the gain in these devices consists of two mechanisms: photoconductive gain and avalanche gain, where the latter is less dominant at normal operating biases.     

Iron Oxide Nanoparticle‐Encapsulated CNT Branches Grown on 3D Ozonated CNT Internetworks for Lithium‐Ion Battery Anodes

Multidimensional hierarchical architecturing is a promising chemical approach to provide unique characteristics synergistically integrated from individual nanostructured materials for energy storage applications. Herein, hierarchical complex hybrid architectures of CNT‐on‐OCNT‐Fe are reported, where iron oxide nanoparticles are encapsulated inside carbon nanotube (CNT) branches grown onto the ozone‐treated surface of 3D CNT internetworked porous structures. The activated surface of the 3D ozonated CNT (OCNT) interacts with the iron oxide nanoparticles, resulting in different chemical environments of inner and outer tubes and large surface area. The mixed phases of iron oxide nanoparticles are confined by full encapsulation inside the conductive nanotubes and act as catalysts to vertically grow the CNT branches. This unique hierarchical architecture allows CNT‐on‐OCNT‐Fe to achieve a reasonable capacity of >798 mA h g^?1 at 50 mA g^?1, with outstanding rate capability (≈72% capacity retention at rates from 50 to 1000 mA g^?1) and cyclic stability (>98.3% capacity retention up to 200 cycles at 100 mA g^?1 with a coulombic efficiency of >97%). The improved rate and cyclic capabilities are attributed to the hierarchical porosity of 3D OCNT internetworks, the shielding of CNT walls for encapsulated iron oxide nanoparticles, and a proximate electronic pathway for the isolated nanoparticles.