Electrochemical study of the chromium electrode behaviour in borate buffer solution

The electrochemical behaviour of the chromium electrode in borate buffer solution (pH 9.3) was studied by cyclic voltammetry and electrochemical impedance spectroscopy. Chromium passivity was observed over a broad potential region, from –1.0 to 0.5 V vs SCE. The passivation process took place in two steps: formation of a chromium oxide monolayer and transition of chromium to a higher valence state. The anodic film exhibited the properties of a p-type semiconductor. Transpassive dissolution of chromium occurred at 0.5 V vs SCE, with two reaction intermediates present, Cr_Cr ^III and Cr_ad ⁴⁺.     

Polyesterification and isomerization of maleic anhydride and 1,6-hexane diol as studied by 1H and 13C n.m.r.

The polyesterification and isomerization reaction of 1,6-hexane diol and maleic anydride in a melt without catalyst was studied by ¹³C and ¹H n.m.r. spectroscopy. The structure and concentration of oligoester species during the polyesterification and isomerization were determined depending on the reaction temperature and time. According to the number and configuration of repeating units determined from ¹H n.m.r. spectra kinetics of both reactions were also considered. The degree of isomerization is continuously increasing in the investigated reaction range.     

Vapour liquid equilibrium with association in both phases: A model with the concentration-dependent liquid phase association constant applied to acetic acid—benzene, -toluene, -p- and -o-xylene

A model employing the correction factors of Marek and Standart, but using a concentration-dependent liquid phase association factor of Jenkins—Robinson, has been used to model vapour—liquid equilibrium data for mixtures of acetic acid with benzene, toluene, o-xylene and p-xylene. With the aim to use systems of acetic acid—benzene and acetic acid—toluene as the test mixtures for distillation columns, the examination of the systems of acetic acid—aromatic hydrocarbons was undertaken. The model promises to be useful in modelling isobaric and isothermal data of acetic acid—benzine, acetic acid—toluene, acetic acid-p-xylene and acetic acid-o-xylene systems. Deviation plots show that the isothermal and isobaric data are represented well.     

meSAT: multiple encodings of CSP to SAT

One approach for solving Constraint Satisfaction Problems (CSP) (and related Constraint Optimization Problems (COP)) involving integer and Boolean variables is reduction to propositional satisfiability problem (SAT). A number of encodings (e.g., direct, log, support, order) for this purpose exist as well as specific encodings for some constraints that are often encountered (e.g., cardinality constraints, global constraints). However, there is no single encoding that performs well on all classes of problems and there is a need for a system that supports multiple encodings. We present a system that translates specifications of finite linear CSP problems into SAT instances using several well-known encodings, and their combinations. We also present a methodology for selecting a suitable encoding based on simple syntactic features of the input CSP instance. Thorough evaluation has been performed on large publicly available corpora and our encoding selection method improves upon the efficiency of existing encodings and state-of-the-art tools used in comparison.     

Aluminium electrodeposition from AlCl3-NaCl melts on glassy carbon,platinum and gold electrodes

The electrochemical deposition and dissolution of aluminium on glassy carbon, platinum and gold electrodes in chloraluminate melts have been investigated using linear sweep voltammetry and potentiostatic pulse techniques. It was shown that deposition of aluminium on the glassy carbon electrode at low overpotentials takes place by 3-D progressive nucleation and growth, with the incorporation of atoms in the crystal lattice as the rate-determining step. At overpotentials higher than –100 mV vs Al, in the melts containing more than 52 mol % of AlCl₃, diffusion of Al₂Cl ₇ ^– , takes over the control of deposition of aluminium. Alloying of platinum and gold electrodes with aluminium from the melt occurs in the underpotential region.     

Oxidative stability of soybean oils with altered fatty acid compositions

The oxidative stabilities of one canola oil and six soybean oils of various fatty acid compositions were compared in terms of peroxide values, conjugated dienoic acid values and sensory evaluations. Two of the soybean oils (Hardin and BSR 101) were from common commercial varieties. The other four soybean oils were from experimental lines developed in a mutation breeding program at Iowa State University that included A17 with 1.5% linolenate and 15.2% palmitate; A16 with 2% linolenate and 10.8% palmitate; A87-191039 with 2% linolenate and 29.6% oleate; and A6 with 27.5% stearate. Seed from the soybean genotypes was cold pressed. Crude canola oil was obtained without additives. All oils were refined, bleached and deodorized under laboratory conditions with no additives and stored at 60°C for 15 days. The A17, A16, A87-191039 and A6 oils were generally more stable to oxidation than the commercial soybean varieties and canola oil as evaluated by chemical and sensory tests. Canola oil was much less stable than Hardin and BSR 101 oils by both chemical and sensory tests. The peroxide values and flavor scores of oils were highly correlated with the initial amounts of linolenate (r=0.95, P=0.001). Flavor quality and flavor intensity had negative correlations with linolenate, (r=−0.89, P=0.007) and (r=−0.86, P=0.013), respectively.     

Laboratory study of submerged metal-mine tailings 1: Effect of solid-liquid contact time and aeration on contaminant concentrations

The dissolution of metals from various metal-mine tailings has been studied through a series of submerged tailings batch tests at U.S. Bureau of Mines laboratories. Tailings selected for this study included both reactive (as determined by column leaching studies) and benign tailings. Metal mobilization in aerated (97 pct saturated with oxygen) samples appeared to be consistently greater than metal dissolution from stagnant (79 pct or 70 pct saturated with oxygen) waters. In the early weeks of the study, sulfate concentrations increased with solid-liquid contact time, while calcium dissolution remained nearly constant. Metal concentrations varied in relation to solid-liquid contact time and aeration. Leachate pH appeared to be nearly independent of solid-liquid contact time for basic tailings. Reactive tailings having both a submerged and a surface component demonstrated increased metal mobility.     

The effect of adding devulcanized rubber on the thermomechanical properties of recycled polypropylene

This work aims to investigate the effect of adding vulcanized or partially devulcanized rubbers on recycled polypropylene (PPr), considering thermomechanical and morphological properties. The study proposes to better understand how structural changes underwent by rubber (after the devulcanization) contributed to improving the mechanical properties of the PPr. The PPr/rubber blends were prepared by a co-rotating twin-screw extruder and then were injected. The blends composed of the most devulcanized rubbers by microwaves with refined microstructure showed higher values of elongation at break and toughness. Data showed that the devulcanization process applied to the rubber interfered positively in its adhesion to the PPr. Data from dynamic mechanical analysis and atomic force microscopy indicated that the most devulcanized rubbers presented an interface more connected to PPr. These chemical interactions possibly impacted the mechanical properties of the PPr. Moreover, dilatation processes favored the fracture mechanisms of the PPr when rubber was added to it.     

Using static suffix array in dynamic application: Case of text compression by longest first substitution

Over the last decade, enhanced suffix arrays (ESA) have replaced suffix trees in many applications. Algorithms based on ESAs require less space, while allowing the same time efficiency as those based on suffix trees. However, this is only true when a suffix structure is used as a static index. Suffix trees can be updated faster than suffix arrays, which is a clear advantage in applications that require dynamic indexing. We show that for some dynamic applications a suffix array and the derived LCP-interval tree can be used in such a way that the actual index updates are not necessary. We demonstrate this in the case of grammar text compression with longest first substitution and provide the source code. The proposed algorithm has O(N²)$O(N^2)$ worst case time complexity but runs in O(N)$O(N)$ time in practice.