面向智能计算的记忆结构理论综述

本文从智能计算角度出发，对记忆的总体结构、信息表征及记忆模型等方面的理论作一综述。并在分析、比较了这些理论与ＡＩ中的相关理论差异的基础上，对面向智能计算的记忆理论研究方法与方向作了扼要讨论。     

Subsecond thermophysics research at the Boris Kidrich Institute Vincha

In the early eighties, at the Boris Kidrich Institute Vincha, a method for measuring specific heat and electrical resistivity of electrical conductors in the millisecond resolution range was developed for measurements from room temperature to 1900 K. Over a period of nearly 10 years, the method was applied to different materials, including pure metals, ferrous, and nickel/ chromium alloys, and to the characterization of candidate materials for thermophysical property reference standards. This paper describes the method and reviews the results obtained in specific heat and electrical resistivity studies of ferromagnetic and other materials. The paper also demonstrates capabilities of the method for describing phase transitions or anomalies in pure metals (Fe, Co, Ni) or alloys (Nichrome, austenitic stainless steel).Paper presented at the Second Workshop on Subsecond Thermophysics, September 20–21, 1990, Torino, Italy.     

冷原子吸收光谱法测定金中汞的含量

根据汞蒸气对波长为253.7mm的紫外光有选择性吸收,并在一定的浓度范围内,吸光度与汞浓度成正比的基本原理,探讨了一种用酸分解试样,通过分离少量银和用KSCN来掩蔽金,在强碱性介质中以二氯化锡还原化合态汞为原子汞,进行紫外吸收测定汞含量的方法.结果表明该方法精密度和准确度均能满足分析要求,并且操作简便,易于推广,完全能够满足金中汞含量测定的需要.其测定范围为Hg0.005%～0.05%,实验回收率为97.6%～102.2%,方法精密度为0.67%～2.42%.     

双噁唑啉化合物对PBT的增粘作用

以２．２＇－双（２－唑啉）和双（２－唑啉基）苯作扩链剂，用焙融挤出的方法，对聚对苯二甲酸丁二酯（ＰＢＴ）进行扩链，考察扩链剂的用量、反应时间和反应温度对ＰＢＴ的特性粘度及端羧基含量（ＣＶ）的影响。结果表明，当用２，２＇－双（２－唑啉）作扩链剂时，ＰＢＴ的特性粘度［η］从０．７９９提高到０．９２６ｄＬ／ｇ，ＣＶ降至５ｅｑ／１０￣６ｇ以下；当用双（２－　唑啉基）苯作扩链剂，［η］从０．７６３增至０．９２５ｄＬ／ｇ，ＣＶ降至１０ｅｑ／１０￣６ｇ以下，达到了较满意的扩链效果。     

On some interval methods for algebraic,exponential and trigonometric polynomials

New inclusion methods for the simultaneous determination of the zeros of algebraic, exponential and trigonometric polynomials are presented. These methods are realized in real interval arithmetic and do not use any derivatives. Using Weierstrass' correction some modified methods with the increased convergence rate are constructed. Convergence analysis and numerical example are included.     

Effect of Microstructure on the Accelerated Creep of 20CrMoV12‐1 and P 91 Steels

In the initial part the change of microstructure for steel X20 CrMoV 121 is discussed in terms of the distribution of carbide precipitates and its effects on accelerated creep resistance and hardness are presented. In the following, experimental results of microstructure and accelerated creep resistance are presented for the steels X20CrMoV 121 and P91 annealed for up to 8760 hours at 650°C and 750°C before the testing. A similar evolution of the distribution of carbide particles of a size above 102 nm is found for both steels, while the accelerated creep resistance is diminished much stronger for the steel X20CrMoV 121. This difference is due to a greater stability of NbC than that of VC precipitates, both related to the evolution of the chemical composition of complex chromium, molybdenum and iron carbide particles.     

Josephson junction with an amorphous silicon barrier

A Josephson junction Nb/Si/Nb with a 10 nm thick amorphous silicon barrier is studied. The upper electrode contains a 2 nm thick sublayer of amorphous phase adjacent to the barrier, as revealed by cross-sectional TEM. Thus, the junction can be considered as a S-I-N-S system with the N layer represented by amorphous niobium. Peculiarities in the I–V and Δ(T) dependencies are observed and explained as a consequence of a proximity effect present in the upper electrode.