Interpretation of scatterometer ocean surface wind vector EOFs over the Northwestern Pacific

Satellite scatterometer winds over the northwestern Pacific were analyzed with the vector empirical orthogonal function (VEOF) method. The Hilbert-Huang transform (HHT), a newly developed non-linear and non-stationary time series data processing method, was also employed in the analysis. A combination of European Remote Sensing Satellite (ERS) −1/2 scatterometer, NASA Scatterometer (NSCAT) and NASA's Quick Scatterometer (QuikSCAT) winds covering the period from January 1992 to April 2000 and the area of 0-50°N, 100-148°E constitutes the baseline for this study. The results indicate that annual cycles dominate the two leading VEOF modes. The first VEOF shows the East Asian monsoon features and the second represents a spring-autumn oscillation. We removed the annual signal from the data set and calculated the interannual VEOFs. The first interannual VEOF represents the interannual variability existing in the spring-autumn oscillation. The temporal mode is correlated with the Southern Oscillation Index (SOI), but has a half-year lag with respect to the SOI. The spatial mode of the first interannual VEOF reflects the response of the tropical and extratropical winds to ENSO events. The second interannual VEOF is another ENSO related mode, and the temporal VEOF mode is correlated with the SOI with a correlation coefficient of 0.78, revealing the wind variability over mid-latitudes, which is associated with ENSO events. Further analysis indicated that the wind variability over the coast of East Asia represents anomalies of a Hadley cell. The quasi-biennial oscillation (QBO) was found in the temporal mode, indicating and verifying that the QBO in the wind fields is related to ENSO events. The third VEOF shows the interannaul variability in the winter-summer mode and displays the interannual variability of the East Asian monsoon. The three leading interannual VEOFs are statistically meaningful as confirmed by a significance test.     

催化裂化技术现状及发展趋势

详述了国内外最新渣油催化裂化、多产柴油催化裂化、低碳烯烃催化裂化、生产清洁燃料催化裂化及催化剂的技术进展，同时根据我国实际情况对今后催化裂化技术的发展提出了建议。     

What are the key elements of a sustainable university?

Nowadays, the principles of sustainable development are becoming increasingly important and universities are acting as agents in promoting these principles within society. In the future, universities will inevitably play crucial role in propagating these principles. This paper highlights important documents and discusses definitions of the term education for sustainable development. Elements, based on continuous feedback loop (Deming spiral) are discussed, in order to incorporate sustainability principles into university activities. The University of Maribor has been used as a case study to test the effectiveness of the proposed integration of sustainable development principles.     

Strategies to increase CdTe solar-cell voltage

There is a significant difference in performance between today's highest efficiency of CdTe solar cells and single-crystal cells of comparable band gap. The largest contribution to this difference is the voltage, where the values for the best CdTe cells are about 230 mV below the best GaAs cells when an appropriate adjustment is made for band gap. CdTe voltage and fill-factor are currently compromised by low recombination lifetime (near 1 ns), low hole density (near 10¹⁴ cm^− 3), and in some cases an excessive back-contact barrier. Numerical simulation is used to evaluate how combinations of lifetime, carrier density, back electron reflection, and interfacial properties affect voltage and cell performance. Two different strategies for improving voltage and performance are explored.     

Deposition and Properties of Superconducting MgB2 Thin Films

The recently discovered superconductor MgB₂ with T _c at 39 K has great potential in superconducting electronics. In this paper, we review the deposition techniques used for MgB₂ thin films in the light of a thermodynamic study of the Mg-B system with the calculation of phase diagrams (CALPHAD) modeling technique. This thermodynamic study identifies a growth window in the pressure–temperature phase diagram, in which the magnesium pressure is very high for likely in situ growth temperatures. A Hybrid Physical–Chemical Vapor Deposition (HPCVD) technique that successfully achieves such a high Mg pressure is shown to produce in situ epitaxial MgB₂ thin films with bulk superconducting properties.     

Residual fracture energy of high-performance and normal concrete subject to high temperatures

Test data on the residual fracture energy of two significantly different concrete types are presented. About 80 beams of high performance basalt concrete and ordinary gravel concrete have been tested in accordance with the RILEM work of fracture method. The beams are heated at 1°C per minute up to a certain maximum temperature and kept at this temperature for 8 hours before cooling them back to room temperature and testing in three-point bending. The tests show that the two concretes behave almost identifical when the fracture energyG _F is considered as a function of maximum temperature. It is found that the damage introduced by a maximum temperature of 300 to 400°C increases the fracture energy by 50% compared with the reference tests at room temperature. A more tortuous crack surface is one plausible explanation for the significant increase inG _F. The article also presents temperature and weight loss recordings from the heating scenarios and finally, the characteristic length and the cohesive tensile softening curve are shown to depend on the maximum temperature. Basically it is demonstrated that the temperature exposure makes the concrete significantly more ductile.

---

Résumé Des données sur l'énergie résiduelle de rupture de deux bétons différents sont présentées. Environ 80 poutres de béton à base de basalte de très haute performance et de béton à base de gravier ordinaire ont été examinées conformément au travaux de la RILEM sur l'énergie de rupture. Les poutres sont chauffées à 1°C par minute jusqu'à une température maximale, puis maintenues à cette température pendant 8 heures avant d'être refroidies de nouveau à la température ambiante. Les poutres sont ensuite testées en flexion (système de flexion en trois points). Les essais prouvent que les deux bétons se comportent d'une manière presque identique quandG _F est considéré comme une fonction de la température maximale. On peut aussi constater que le dommage occasionné par une température maximale de 300 à 400°C augmente l'énergie de rupture de 50% par comparaison aux essais de référence réalisés à la température ambiante. Une surface de rupture plus tortueuse semble être une explication plausible pour l'augmentation significative deG _F. L'article présente également les évolutions de la température et de la perte de poids pour les scénarios de chauffage utilisés. En conclusion, cette étude montre que la longueur caractéristique et la courbe de post pic dépendent de la température maximale. Fondamentalement cela démontre que l'exposition à la température rend le béton sensiblement plus ductile.

     

Changes in polymer foils used in food packaging tested by using differential scanning calorimetry

This work is an experimental study of the differential scanning calorimetry characterisation of polymer materials used in food packaging materials, such as polypropylene (0.03 mm), polyethylene (0.1 and 0.03 mm), poly(D-(-)-Β-hydroxybutyrate) (powder), two-layered polypropylene (0.064 mm), and two-layered polypropylene with poly-vinylidene-chloride (0.012/0.021). The polymer stability was checked by simulation of conditions during food preparation in microwave ovens, sterilisation or rapid freezing. The materials were tested in the temperature range from 40 to 200‡C at different scan rates from 2 to 30°C min⁻¹ during heating or cooling. The enthalpies show a high correlation coefficient (0.964) with scan rate. All samples undergo phase change in the temperature range from 107 to 173°C during heating and enthalpies are in the range from 31.8 to 71.1Jg⁻¹. Upon subsequent cooling from 200°C, the temperature range of phase changes is shifted to lower temperatures from 86 to 102°C with enthalpies ranging from 30.4 to 57.8 J g⁻¹. Experiments with exposure of polymers to microwave radiation and freezing prove that the phase change considering the temperature range is very similar in all experiments.     

Chemical compositions and optical properties of HfOxNy thin films at different substrate temperatures

High-k HfO_xN_y thin films have been grown by radio frequency (rf) reactive sputtering of metal Hf target in N₂/Ar/O₂ ambient at different substrate temperatures. The chemical compositions of the films have been investigated as a function of substrate temperature by X-ray photoelectron spectroscopy (XPS). XPS measurements showed that nitrogen concentration increases with an increase in substrate temperature. Room-temperature spectroscopic ellipsometry (SE) with photon energy 0.75–6.5 eV was used to investigate the optical properties of the films. SE results demonstrated that refractive index n increases with an increase in substrate temperature. Based on TL parameters which were obtained from the best fit results used in a simulation of the measured spectra, meanwhile, we conclude that the energy band gap (E_g) decreases with an increase in substrate temperature.     

Convolutional solutions of partial difference equations

A significant part of the theory of one-dimensional linear shift-invariant systems is based on the concept of weighting function (or impulse response): the output is the convolution of the weighting function with the input. This paper introduces the concept of linear translation-invariant systems and uses this notion in studying impulse response, z-transforms, and transfer functions for multidimensional systems.     

Syntactic mismatches in machine translation

This paper addresses one of the central problems arising at the transfer stage in machine translation: syntactic mismatches, that is, mismatches between a source-language sentence structure and its equivalent target-language sentence structure. The level at which we assume the transfer to be carried out is the Deep-Syntactic Structure (DSyntS) as proposed in the Meaning-Text Theory (MTT). DSyntS is abstract enough to avoid all types of divergences that result either from restricted lexical co-occurrence or from surface-syntactic discrepancies between languages. As for the remaining types of syntactic divergences, all of them occur not only interlinguistically, but also intralinguistically; this means that establishing correspondences between semantically equivalent expressions of the source and target languages that diverge with respect to their syntactic structure is nothing else than paraphrasing. This allows us to adapt the powerful intralinguistic paraphrasing mechanism developed in MTT for purposes of interlinguistic transfer.