Small-scale crack blunting at a bimaterial interface with Coulomb friction

The deformation field near the tip of a tensional crack impinging upon a normally loaded bimaterial frictional interface is studied. By allowing the two materials to slide with respect to each other along the interface the high stresses around the crack tip are relaxed. The region of slip as well as the stress distribution inside the slip zone is obtained as a function of the far field loading parameter.     

Bonding behaviour of chemically modified wood particles for board production

The objective of this paper was to evaluate the bonding behaviour of chemically modified wood particles towards an isocyanate resin system, as determined from internal bond strength of the board, and to determine which resin system, isocyanate or formaldehyde is suitable for use in boards made from modified raw material. It was found that chemical modification of wood chips and strands did not significantly affect the bonding efficiency of isocyanate resin, but the bonding efficiency of formaldehyde resins was strongly influenced. This behaviour can be a consequence of the usage of a less pH dependent resin that is fully cured during hot pressing in combination with the high mobility of the resin which causes penetration to considerable depth into compressed particles repairing weak zones, which are created during the modification process as chips are exposed to elevated temperatures, by sticking them together. It is suggested therefore, that the isocyanate resin system is more suitable for use in boards made from modified raw material than the formaldehyde resin system.     

Photonic bandgap fibre oscillators and amplifiers

In the search for ever higher output power or energy from fibre oscillators or amplifiers a nowadays mature technology relies on enlarging the fibre mode area. Broadening of the core diameter, all other things being equal, inevitably yields a multimode fibre, thereby dramatically limiting the device usefulness. Various strategies have been deployed to design and manufacture single transverse mode fibre oscillators and amplifiers, among which making use of the so-called photonic bandgap effect to restrict the modal population seems promising. Helped by efficient and reliable numerical tools the design of large mode area singlemode photonic bandgap fibres is presented. Two fibres with 20-μm and 40-μm core diameter, both of them heavily doped with Yb³⁺ ions, have been fabricated by the widespread modified chemical vapour deposition process and are shown to behave properly when used as the core element of either continuous wave oscillators or femtosecond amplifiers. Good output beam quality (M² parameter spanning from 1.12 to 1.5 for the set of fibres studied) and high slope efficiency of 80% in cw oscillation regime are demonstrated. Furthermore the 40-μm core diameter fibre is shown to be resilient to tight bending down to 7.5-cm radius. The stack-and-draw process makes it easy to tailor the outer cladding so that a large numerical aperture can be reached. Subsequently, from this air-clad fibre, 500 fs 47 W pulses at 35 MHz are obtained from a two-stage chirped pulse amplification system.     

Determination of sulphur and copper depth distribution in patina layers using nuclear reaction techniques

A method for Cu and S profiling in patina layers was developed by applying a combination of nuclear reaction analysis (NRA) and Rutherford backscattering spectroscopy (RBS). The copper profiling was performed by using the 1327 keV γ-ray deexciting the third excited state to the ground state of ⁶³Cu produced by the reaction ⁶³Cu(p,p^′γ)⁶³Cu. For the determination of sulphur the 2230 keV γ-ray was used deexciting the first excited state to the ground state of ³²S formed through the reaction ³²S(p,p^′γ)³²S, which exhibits three sharp resonances at projectile energies 3.094, 3.195 and 3.379 MeV. The relevant cross-sections were measured in the energy range between 3.0 and 3.7 MeV in steps of 20 keV at 125° to the incident proton beam direction. The technique was tested using artificially produced and natural copper patina layers. Supporting information on the depth distribution of the constituent elements of the patina samples was obtained by p-RBS (E_p: 1.5 MeV, θ: 160°).     

Distributed computation of averages over ad hoc networks

In this paper, we develop algorithms for distributed computation of averages of the node data over networks with arbitrary but fixed connectivity. The algorithms we develop are linear dynamical systems that generate sequences of improving approximations to the desired computation at each node, via iterative processing and broadcasting. The algorithms are locally constructed at each node by exploiting only locally available and macroscopic information about the network topology. We present methods for optimizing the convergence rates of these algorithms to the desired computation, and evaluate their performance characteristics in the context of a problem of signal estimation from multinode noisy observations. By conducting simulations based on simple power-loss propagation models, we perform a preliminary comparison of the algorithms we develop against other types of distributed algorithms for computing averages, and identify transmit-power optimized algorithmic implementations as a function of the size and density of the sensor network.     

In vivo studies on the role of the peripheral benzodiazepine receptor (PBR) in steroidogenesis

In various steroidogenic cell models, mitochondrial preparations and submitochondrial fractions, the expression of the mitochondrial 18 kDa peripheral-type benzodiazepine receptor (PBR) protein confers the ability to take up and release, upon ligand activation, cholesterol. Thus, cholesterol becomes available to P450scc on the inner mitochondrial membrane. These in vitro studies were validated by in vivo experiments. Treatment of rats with ginkgolide B (GKB), specifically reduced the ligand binding capacity, protein, and mRNA expression of the adrenocortical PBR and circulating glucocorticoid levels. Treatment with GKB also resulted in inhibition of PBR protein synthesis and corticosterone production by isolated adrenocortical cells in response to ACTH. The ontogeny of both PBR binding capacity and protein directly paralleled that of ACTH-inducible steroidogenesis in rat adrenal cells and in rats injected with ACTH. In addition, the previously described suppression of luteal progesterone synthesis in the pregnant rat by continuous in vivo administration of a gonadotropin-releasing hormone agonist may be due to decreased luteal PBR ligand binding and mRNA. These results suggest that (i) PBR is an absolute prerequisite for adrenocortical and luteal steroidogenesis, (ii) regulation of adrenal PBR expression may be used as a tool to control circulating glucocorticoid levels and (iii) the stress hypo-responsive period of neonatal rats may result from decreased adrenal cortical PBR expression.     

CRITICAL PLANE APPROACHES IN HIGH-CYCLE FATIGUE: ON THE DEFINITION OF THE AMPLITUDE AND MEAN VALUE OF THE SHEAR STRESS ACTING ON THE CRITICAL PLANE

Critical plane approaches are useful methods when designing against long-term fatigue of machine components made from metals. Somewhat surprisingly, the very basic problem of the evaluation of the amplitude and mean value of the shear stress acting on the critical plane is still not resolved satisfactorily for non-proportional cyclic loading conditions. In the present paper, existing proposals for solving this problem are briefly reviewed and their weaknesses highlighted. Then it is shown, through particular examples, that application of these proposals can lead to ambiguous results. Therefore, new definitions of the amplitude and mean value of the shear stress acting on the critical plane are formulated here. These new definitions are free from any ambiguity because they are based on the construction of the unique minimum-circumscribed circle to the path described by the shear stress on the critical plane. The centre of this circle defines the mean shear stress, whereas its radius provides the corresponding shear stress amplitude. The algorithm yielding this minimum-circumscribed circle is presented in some detail.     

Yield response and nitrogen utilization efficiency by drip-irrigated potato

Two field experiments were conducted in the Jordan Valley to evaluate potato response to N fertigation. Nitrogen as ammonium sulphate was supplied through irrigation water (fertigation) at rates of 0, 35, 70 and 105 mg N l^-1. Soil N application treatment equivalent to the fertigation treatment of 70 mg N l^-1 was included. ¹⁵N labelled ammonium sulphate was used to evaluate the N recovery and utilization efficiency. Yield increased by the N rate. The soil N application gave higher yield than the zero N and lower than the fertigated treatments. The increase in yield was due to the increase in the size of the tubers. The specific gravity was the highest with the zero N. The index ratios of potato tubers were similar with all treatments. The N derived from fertilizers by both tubers and shoots, increased with the N rate regardless of the method of application. The soil application treatments had fertilizer utilization as high as the fertigation treatments and produced total tuber yield not significantly different from that obtained by the fertigation treatment with similar rate. This might be attributed to the poor fertilizer distribution in the root zone in the fine textured soil. The low value of the fertilizer utilization of the plant receiving the ¹⁵N in the preceding season suggested possibilities of rapid transformation and immobilization by the soil microorganisms.     

Speed and power factor controller for AC adjustable speed drives

The speed and power factor of an adjustable speed slip power recovery drive are controlled in order to optimize the operation. This is accomplished by means of a variable-voltage-variable-frequencies power converter. The function of the digital controller of the power converter is to provide the online speed and power factor regulation. The hardware and software are described. This scheme has an accurate voltage output with very low harmonic content, a good resolution for the phase angle regulation and the frequency control with the possibility of range extension     

Targeted disruption of the peripheral-type benzodiazepine receptor gene inhibits steroidogenesis in the R2C Leydig tumor cell line

To evaluate the role of the mitochondrial peripheral-type benzodiazepine receptor (PBR) in steroidogenesis, we developed a molecular approach based on the disruption of the PBR gene, by homologous recombination, in the constitutive steroid producing R2C rat Leydig tumor cell line. Inactivation of one allele of the PBR gene resulted in the suppression of PBR mRNA and ligand binding expression. Immunoblot and electron microscopic immunogold labeling analyses confirmed the absence of the 18-kDa PBR protein in the selected clone. Although mitochondria from the PBR-negative cells contained high levels of the constitutively expressed 30-kDa steroidogenic activity regulator protein, these cells produced minimal amounts of steroids compared with normal cells (5%). Moreover, mitochondria from PBR-negative cells failed to produce pregnenolone when supplied with exogenous cholesterol. Addition of the hydrosoluble cholesterol derivative, 22R-hydroxycholesterol, increased steroid production by the PBR-negative R2C cells, indicating that the cholesterol transport mechanism was impaired. Stable transfection of the PBR-negative R2C Leydig cells with a vector containing the PBR cDNA resulted in the recovery of the steroidogenic function of the cells. These data demonstrate that PBR is an indispensable element of the steroidogenic machinery, where it mediates the delivery of the substrate cholesterol to the inner mitochondrial side chain cleavage cytochrome P-450.