Regionalization of Rainfall Intensity-Duration-Frequency using a Simple Scaling Model

Design storm is one of the most important tools to design hydraulic structures, hydrologic system and watershed management, mostly extracted by intensity- duration - frequency (IDF) curves for a given specific duration and return period. As for conventional methods to calculate IDF curves, the precipitation should be recorded for different durations so that foregoing curves can be extracted. Such data can be collected from rain gauge stations. In many areas, just daily precipitation data are available by which IDF curves cannot be extracted as per conventional methods. The aim of this research is to make IDF curves for short-term durations according to time scaling model as well as daily rainfalls. The relationships of this method are characterized with three variables including mean (μ ₂₄) and standard deviation (σ ₂₄) of daily rainfall intensity, and scaling exponent (H) by which all IDF curves might be drawn. The method used in present paper entails for less computational steps than conventional methods and by far has low parameters considerably than others in turn increases reliability. Scaling method is used to extract the IDF curves in rain-gauge stations in Khuzestan province located in southwest Iran and results proved the efficiency and robustness of the scaling method. Also ability of scaling concept method was examined in constructing of regional IDF.     

A comprehensive study on the kinetics of aqueous free-radical homo- and copolymerization of acrylamide and diallyldimethylammonium chloride by online 1H-NMR spectroscopy

Free-radical homo- and copolymerization of acrylamide (AAm) and diallyldimethylammonium chloride (DADMAC) initiated with potassium persulfate (KPS) were performed in the presence of 0.1 M NaCl solution in D₂O at 50 °C. Online ¹H-NMR kinetic experiments were used to study polymerization kinetics via determination of the individual and overall conversion of the comonomers and compositions of the comonomer mixture and produced copolymer as a function of the reaction time. Reactivity ratios of the AAm and DADMAC were calculated by Mao-Huglin (MH) and extended Kelen-Tudos (KT) methods to be 7.0855?±?1.3963, 0.1216?±?0.0301 and 6.9458?±?2.0113, 0.1201?±?0.0437 respectively. “Lumped” kinetic parameter (k _p k _t ^??0.5 ) was estimated from experimental data. Results showed that k _p k _t ^??0.5 value increases by increasing mole fraction of the AAm in the initial reaction mixture. Drift in the comonomer mixture and copolymer compositions with reaction progress was evaluated experimentally and theoretically. Theoretical values were calculated from Meyer-Lowry equation by using reactivity ratios obtained from MH method. A good fitting between the experimental and theoretical values was observed, indicating accuracy of the reactivity ratios estimated in the present work. It was found from following changes in the copolymer composition with the comonomer conversion that produced copolymer has a statistical structure.     

Effect of pH and carbon nanotube content on the corrosion behavior of electrophoretically deposited chitosan–hydroxyapatite–carbon nanotube composite coatings

In the first stage, chitosan (CH)–hydroxyapatite (HA)-multiwalled carbon nanotube (MWCNT) composite coatings were synthesized by electrophoretic deposition technique (EPD) on 316L stainless steel substrates at different levels of pH and characterized by X-ray diffraction (XRD), Raman spectroscopy, FTIR and field emission scanning electron microscopy (FESEM). A smooth distribution of HA and MWCNT particles in a chitosan matrix with strong interfacial bonding was obtained. In the next stage, effects of pH and MWCNT content of the suspension on the corrosion behavior and deposition mechanism were studied. Potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) curves revealed that increasing pH level of the suspension increases the corrosion protection properties of the deposited composite coating in simulated body fluid (SBF). Furthermore, Nyquist plots showed that increasing MWCNT content of the suspension resulted in higher amounts of R_p, but because of the capillary properties of MWCNTs and degradability of the chitosan matrix, corrosion protection level of the coatings containing HA–CH–MWCNT was lower than those of coatings containing solely HA–CH. Amperometric curves in different pH levels of the suspension revealed that the system is diffusion controlled at elevated pH values.     

Structural and magnetic properties of NiFe2−xBixO4 (x = 0, 0.1, 0.15) nanoparticles prepared via sol-gel method

NiFe_2−xBi_xO₄ (x = 0, 0.1, 0.15) nanopowders were synthesized via sol-gel method. The precursor gels were calcined at 773 K in air for 1 h to obtain the pure nanostructured NiFe_2−xBi_xO₄ spinel phase. The crystal structure and magnetic properties of the substituted spinel series of NiFe_2−xBi_xO₄ have been investigated by means of ⁵⁷Fe Mössbauer spectroscopy, transmission electron microscopy and alternating gradient force magnetometry. Mössbauer spectroscopic measurements revealed that Bi³⁺ cations tend to occupy octahedral positions in the structure of the substituted ferrite, i.e., the crystal-chemical formula of the as-prepared nanoparticles may be written as: (Fe)[NiFe_1−xBi_x]O₄ (x = 0, 0.1, 0.15), where parentheses and square brackets enclose cations on sites of tetrahedral and octahedral coordination, respectively. Selective area electron diffraction studies provided evidence that the samples of the NiFe_2−xBi_xO₄ series, independently of x, exhibit the cubic spinel structure. The values of the saturation magnetization and the coercive field of NiFe_2−xBi_xO₄ nanoparticles were found to decrease with increasing degree of bismuth substitution.     

Tailoring interfacial adhesion and mechanical performance of biocomposites based on poly(lactic acid)/rice straw by using maleic anhydride through reactive extrusion process

In this study, all-green biocomposites based on poly(lactic acid) (PLA)/rice straw (RS) as an agricultural waste were prepared, and the physical, structural, and mechanical properties of these biocomposites were enhanced by alkali-pulping of RS and chemical grafting of PLA onto the lignocellulosic fiber. The reactive compatibilizers of maleic anhydride grafted PLA (PLA-g-MA) were obtained through a reactive extrusion process at different processing conditions. The probable chemical reactions between the functional groups of PLA-g-MA with hydroxyl groups of RS pulp as well as the end groups of PLA chains can effectively improve the interfacial adhesion between the filler and matrix. However, the findings confirm the great importance of PLA-g-MA chemical structure in controlling the biocomposite performance. By choosing proper processing conditions for preparing PLA-g-MA and incorporating this compatibilizer into the PLA/treated RS biocomposite, Young modulus, tensile strength, impact strength, and tensile toughness of the PLA/RS biocomposite increased by 101%, 156%, 96%, and 327%, respectively.     

Modification of silica nanoparticles with hydrophilic sulfonated polymers by using surface-initiated redox polymerization

Sulfonated polymer/silica hybrid nanoparticles were prepared by free radical polymerization of 2-acrylamido-2-methyl-1-propane sulfonic acid (PAMPS-g-SN) and styrene sulfonic acid sodium salt (PSSA-g-SN), initiated on the surfaces of aminopropyl-functionalized silica nanoparticles (ASN). Ce(IV) ammonium nitrate/nitric acid and sodium dodecyl sulfate were used as redox initiator and stabilizer, respectively. ASN Nanoparticles were synthesized by a covalently attached 3-aminopropyltriethoxysilane onto the surface of silica nanoparticles. Sulfonated monomers (AMPS or SSA) were then grafted onto the ASN nanoparticles, ultrasonically dispersed in water, using redox initiator system at 40?°C. ASN, PAMPS-g-SN and PSSA-g-SN nanoparticles were characterized by Fourier transform infrared (FTIR), thermogravimetry, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analyses. FTIR and TGA results indicated that both AMPS and SSA monomers were successfully grafted onto the silica nanoparticles. The grafted amounts of sulfonated polymers onto the silica nanoparticles were estimated from TGA thermograms to be 46 and 22?% for PAMPS and PSSA, respectively. From SEM and TEM micrographs, the average-diameters of the polymer-grafted silica nanoparticles were measured to be <50?nm with a (semi)spherical morphology, in which several silica nanoparticles were able to form a core with PAMPS or PSSA existing around the silica nanoparticles.     

CO<Subscript>2</Subscript>/O<Subscript>2</Subscript>-oxidative dehydrogenation of ethane to ethylene over highly dispersed vanadium oxide on MgO-promoted sulfated-zirconia nanocatalyst: Effect of sulfation on catalytic properties and performance

The ZrO₂ was treated by various molarities of H₂SO₄ solution (0, 0.5, 1 and 2) then mixed by MgO and impregnated with 5 wt% of V₂O₅. The synthesized catalysts were characterized by XRD, FESEM, PSD, EDX, BET and FTIR techniques. According to the results obtained by characterization studies, the modification of MgO-ZrO₂ support by various molarities of H₂SO₄ solution had a great impact on the crystallinity, morphology and functional groups of prepared nanocatalysts. On the other hand, the catalytic activity of synthesized nanocatalysts in the oxidative dehydrogenation of ethane to ethylene is affected by the sulfur content on the support. The crystalline structures of MgO and ZrO₂ were confirmed by XRD analysis. The crystallinity of tetragonal ZrO₂ was decreased by increasing H₂SO₄ molarity used in ZrO₂ (Sx) synthesising. The highest catalytic performance and ethylene productivity (C₂H₄ yield of 48% and ethane conversion of 79% at 700 °C) were obtained on the V₂O₅/MgO-ZrO₂ (S1) nanocatalyst. This could be related to the superior acid-base property, smaller particles, better dispersion of active phase and uniform morphology of V₂O₅/MgO-ZrO₂ (S1).     

Commercial lignosulfonates from different sulfite processes as partial phenol replacement in PF resole resins

Four commercial spruce lignosulfonates representing the most common acidic, neutral, and alkaline sulfite pulping processes and varying significantly in molecular weight characteristics were tested as partial (40 wt %) phenol substitute materials for the manufacture of lignosulfonate‐phenol‐formaldehyde (LPF) resole resins. Similar as recently reported for technical lignins from nonsulfite pulping processes (kraft, soda, organosolv), all lignosulfonates of this study effectuated a faster viscosity gain during resole cooking compared to the lignin‐free reference resin (1000 mPa s after 120 min vs. 250 min to reach 1000 mPa s). Sodium lignosulfonate featuring the lowest weight average molecular weight (M_w 5780 g mol^?1) and dispersity (Ð 6.1) turned out to be superior to the other lignosulfonates with regard to curing rate (B‐time; 3:37 min vs. 6:41–9:08 min) and tensile shear strength development under hot pressing (120 °C; T_S,max = 5.64 N mm^?2 after 8 min) for beech veneer strips glued together with the respective LPF resins. Calcium and magnesium lignosulfonates are less suited with regard to phenol replacement due to the poor performance of the respective LPF adhesives in terms of tensile shear strength (T_S,max = 3.29–3.49 N mm^?2 after 12 min) most likely caused by considerable amounts of side products formed in the course of formose‐type reactions. Phenolation of the two promising lignosulfonates, that is, sodium and ammonium lignosulfonate, did neither considerably increase the rate of PF network formation during resin cooking and curing nor improve tensile strength development during hot pressing. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45893.     

Preparation of hydrophilic dimethyl 5‐sodium sulfoisophthalate/poly(ethylene terephthalate) nanofiber composite membranes for improving antifouling properties

In this study, the effect of dimethyl 5‐sodium sulfoisophthalate (SSI) nanoparticles (NPs) on the antifouling properties of poly(ethylene terephthalate) (PET) electrospun nanofiber membranes (ENMs) was investigated through the ultrafiltration of C. I. Basic Blue 3. 3 dye. To reveal the tortuous effect of this additive on the antifouling properties, scanning electron microscopy was used for the characterization of the ENM structure and the optimization of the SSI NP content. Then, some selected physical and structural properties of the membrane, such as the porosity, moisture regain, contact angle, hydraulic permeability (L _p ), and mechanical properties, in the optimized range of SSI NP contents were investigated. Finally, the influence of this additive on the rejection and flux recovery ratio of the prepared membranes was considered. Consequently, the antifouling properties were assessed with consideration of all of the aforementioned parameters. The SSI/PET2 membrane (that with 0.02% w/w SSI NPs with respect to the total amount of PET polymer and SSI NPs), with an average nanofiber diameter of 450 nm, a porosity of 78.44%, a moisture regain of 9.34%, a contact angle of 86.48°, an L _p of 42,167 L h^?1 m^?2 bar^?1, a tensile strength of 4.66 ± 0.04 MPa, a flux recovery ratio of 15.3%, and a final rejection of 95%, showed a significant enhancement in the antifouling properties compared with pristine PET ENMs. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44522.