Outbreak of serogroup C meningococcal disease associated with campus bar patronage

Between February 1991 and April 1992, eight undergraduates at a US residential university and one at a nearby 2-year college contracted serogroup C meningococcal disease. A case-control investigation with 20 controls per case, oropharyngeal carriage surveys, and multilocus enzyme electrophoresis (MEE) of serogroup C isolates were used to identify factors contributing to the outbreak. All eight sterile-site isolates from cases were closely related by MEE and were similar (though not identical) to the strain associated with the 1991-1992 epidemic of meningococcal disease in eastern Canada. Disease was associated with cigarette smoking (p = 0.012), recent patronage of campus-area bars (p = 0.034), estimated amount of time spent in campus-area bars (p = 0.0003), and, especially, recent patronage of one specific bar, bar A (p = 0.0006; odds ratio = 23.1, 95% confidence interval 3.0-571.5). In carriage surveys, 1,528 throat cultures taken from (primarily student) noncases yielded only five (0.3%) strains that were identical by MEE to those from cases. Two of these were found among 22 cultures obtained from bar A employees in spring 1992. Some cases in this outbreak may have followed transmission of the epidemic strain in bar A. Campus bar environments may facilitate the spread of meningococcal disease among teenagers and young adults.     

Modified atmosphere packaging of a mixed prepared vegetable salad dish

The aim of this study was to design a modified atmosphere package for a mixed vegetable salad consisting of 75 g of cut carrot, 55 g of cut cucumber, 20 g of sliced garlic and 50 g of whole green pepper. Respiration data of all the components were combined with film permeability data to predict package atmospheres and design optimal packages for experimental testing for improved shelf-life of the produce. The optimal package avoided minimum O₂ and maximum CO₂ tolerance limits, and chilling injury temperatures for any component. A pouch form package made of 27 mm low density polyethylene developed a modified atmosphere of 2.0–2.1% O₂ and 5.5–5.7% CO₂, which was beneficial for all components and provided better quality retention than other test packages.     

A neural network-based power system stabilizer using power flowcharacteristics

A neural network-based power system stabilizer (neuro-PSS) is designed for a generator connected to a multi-machine power system utilizing the nonlinear power flow dynamics. The use of power flow dynamics provides a PSS for a wide range of operation with reduced size neural networks. The neuro-PSS consists of two neural networks: neuro-identifier and neuro-controller. The low-frequency oscillation is modeled by the neuro-identifier using the power flow dynamics, then a generalized backpropagation-through-time (GBTT) algorithm is developed to train the neuro-controller. The simulation results show that the neuro-PSS designed in this paper performs well with good damping in a wide operation range compared with the conventional PSS     

Effect of nicotine, lobeline, and mecamylamine on sensory gating in the rat

In normal subjects, if an acoustic startle stimulus is immediately preceded by a small brief change in background noise intensity, the magnitude of the subsequent startle response is decreased. This prepulse inhibition (PPI) of an acoustic startle response has been shown to be associated with sensorimotor gating. PPI is disrupted in schizophrenic patients and has been linked to attentional disorders characteristic of this disease. We tested the effects of (-)-nicotine, (0.19, 0.62, and 1.9 mumol/kg IP) (equivalent to 0.03, 0.1, and 0.3 mg/kg base) and the nicotinic cholinergic receptor (nAChR) channel blocker, mecamylamine (5.0 and 50 mumol/kg IP) (equivalent to 1.0 and 10.0 mg/kg) on PPI of the acoustic startle response in the rat. Nicotine increased the PPI at the lowest prepulse signal levels but not at the stronger levels. Mecamylamine was without effect at 5.0 mumol/kg, but the 50 mumol/kg dose decreased the inhibition at both weak and strong prepulse (PP) levels. Mecamylamine (5.0 mumol/kg) pretreatment did not block the (-)-nicotine-induced increase in PPI. Lobeline (0.19, 0.62, 1.9, and 6.2 mumol/kg IP) (equivalent to 0.071, 0.23, 0.71, and 2.3 mg/kg) was without effect. These results are consistent with a mecamylamine-insensitive effect of nicotine to improve gating in normal rats. The nAChR subtype involved in producing nicotine's increase of PPI needs further investigation.     

A 4-MB on-chip L2 cache for a 90-nm 1.6-GHz 64-bit microprocessor

A 4-MB L2 data cache was implemented for a 64-bit 1.6-GHz SPARC(r) RISC microprocessor. Static sense amplifiers were used in the SRAM arrays and for global data repeaters, resulting in robust and flexible timing operation. Elimination of the global clock grid over the SRAM array saves power, enabled by combining the clock information with array select signals. Redundancy was implemented flexibly, with shift circuits outside the main data array for area efficiency. The chip integrates 315 million transistors and uses an 8-metal-layer 90-nm CMOS process.     

A four-channel 3.125-Gb/s/ch CMOS serial-link transceiver with a mixed-mode adaptive equalizer

This work presents a quad-channel serial-link transceiver providing a maximum full duplex raw data rate of 12.5Gb/s for a single 10-Gbit eXtended Attachment Unit Interface (XAUI) in a standard 0.18-/spl mu/m CMOS technology. To achieve low bit-error rate (BER) and high-speed operation, a mixed-mode least-mean-square (LMS) adaptive equalizer and a low-jitter delay-immune clock data recovery (CDR) circuit are used. The transceiver achieves BER lower than <4.5/spl times/10/sup -15/ while its transmitted data and recovered clock have a low jitter of 46 and 64 ps in peak-to-peak, respectively. The chip consumes 178 mW per each channel at 3.125-Gb/s/ch full duplex (TX/RX simultaneous) data rate from 1.8-V power supply.     

Effects of various post-treatments on carbon nanotube films for reliable field emission

In this report, the FE characteristics of carbon nanotubes (CNTs) treated using both thermal annealing and mechanical coatings on the as-grown CNTs systematically studied. It was found that in the high temperature annealed samples, CNTs were attacked at its root during annealing due to a small amount of oxygen, and were pulled out of the substrate in places after FE measurements because of the contact resistance. However, for the mechanically coated samples both with spin on glass (SOG) and polymethyl methacrylate (PMMA), CNTs were found to be nearly intact after FE measurements and showed reliable FE characteristics over repeatable voltage scan. The reliability of CNTs during FE could be owing to the strong adhesion of CNTs to the substrate both by SOG and PMMA coatings.     

The appropriateness of the systematic framework to develop diagnosis procedures of nuclear power plants—an experimental verification

It has been well recognized that a diagnosis procedure that allows operators to successfully identify the nature of an on-going event is inevitable for an effective and appropriate recovery. Unfortunately, studies for a framework that can suggest a unified and consistent process in constructing a serviceable diagnosis procedure seem to be scant. Thus, Park et al. have suggested a systematic framework that can be used to construct a useful diagnosis procedure. In addition, the diagnosis procedure that is currently in use at the reference nuclear power plant (NPP) is reformed in order to demonstrate the appropriateness of the suggested framework. However, the necessity of a well-designed experiment is proposed to confirm the appropriateness of the suggested framework.In this regard, in this study, an experiment is conducted using a full-scope simulator of the reference NPP. From the experiment, two sets of operators' diagnosis performance data are collected, and then they are compared to investigate the change of an operator's diagnosis performance with respect to two types of diagnosis procedures.As a result, it is shown that an operator's diagnosis performance is improved when the revised diagnosis procedure is used. Therefore, it is reasonable to conclude that the suggested framework is useful in constructing an effective diagnosis procedure.