Novel Online Diagnostic Analysis for In-Flight Particle Properties in Cold Spraying

In cold spraying, powder particles are accelerated by preheated supersonic gas stream to high velocities and sprayed on a substrate. The particle velocities depend on the equipment design and process parameters, e.g., on the type of the process gas and its pressure and temperature. These, in turn, affect the coating structure and the properties. The particle velocities in cold spraying are high, and the particle temperatures are low, which can, therefore, be a challenge for the diagnostic methods. A novel optical online diagnostic system, HiWatch HR, will open new possibilities for measuring particle in-flight properties in cold spray processes. The system employs an imaging measurement technique called S-PTV (sizing-particle tracking velocimetry), first introduced in this research. This technique enables an accurate particle size measurement also for small diameter particles with a large powder volume. The aim of this study was to evaluate the velocities of metallic particles sprayed with HPCS and LPCS systems and with varying process parameters. The measured in-flight particle properties were further linked to the resulting coating properties. Furthermore, the camera was able to provide information about variations during the spraying, e.g., fluctuating powder feeding, which is important from the process control and quality control point of view.     

Optical scattering of nanocrystalline Pb(ZrxTi1−x)O3 films

Optical characterization methods, like spectrophotometry at UV–vis-NIR wavelengths and prism-coupler method, were applied to polycrystalline Pb(Zr_xTi_1?x)O₃ thin films at various thicknesses. Thin films were deposited at room temperature by pulsed laser deposition on MgO (1 0 0) substrates and post-annealed at different temperatures. X-ray diffraction and atomic force microscopy were used to characterize the crystal structure and surface morphology of the thin films, respectively.Well oscillating transmission with a sharp fall near the absorption edge was found in films with high orientation and low surface roughness. Changes in the surface morphology and crystal orientation were found to modulate optical interference maxima and minima of the transmittance spectra and to increase the width of the TE₀ mode (Δβ ≈ 0.06) indicating an increase in the scattering losses of the films. Single-phase oriented films had sharpest coupling values (Δβ ≈ 0.005) of the TE₀ mode.     

Adhesion and aggregation properties of probiotic and pathogen strains

Autoaggregation has been correlated with adhesion, which is known to be a prerequisite for colonization and infection of the gastrointestinal tract by many pathogens. The coaggregation properties of probiotic strains with pathogens as well as their ability to displace pathogens are of importance for therapeutic manipulation of the aberrant intestinal microbiota. Consequently, the ability to aggregate and coaggregate are desirable properties for probiotics in health-promoting foods. Aggregation assays and bacterial adhesion to hydrocarbons (BATH test) demonstrated significant differences in cell surface properties among the tested commercial probiotic strains. Hydrophobicity increased when the cells were heat-inactivated. All probiotic strains tested showed aggregation abilities with the pathogen strains tested, but the results were strain-specific and dependent on time and incubation conditions. Our results indicate that the ability to autoaggregate, together with cell-surface hydrophobicity and coaggregation abilities with pathogen strains can be used for preliminary screening in order to identify potentially probiotic bacteria suitable for human or animal use.     

An 8-hour system for Salmonella detection with immunomagnetic separation and homogeneous time-resolved fluorescence PCR

We describe a system consisting of rapid sample enrichment and homogeneous end-point PCR analysis that enables the detection of Salmonella in various food matrices in 8 h. Sample preparation starts with 6 h enrichment step in supplemented broth, after which Salmonella cells are collected with immunomagnetic particles. The particles are washed and dispensed to ready-to-use PCR reaction vessels, which contain dried assay-specific reagents and an internal amplification control. PCR is performed with a novel instrument platform utilising the sensitive label technology of time-resolved fluorometry. Qualitative assay results are automatically interpreted and available in 45 min after sample addition. The overall accuracy, sensitivity and specificity of the Magda CA Salmonella system were 99.1%, 98.4% and 100.0%, respectively, based on the evaluation of 107 samples (beef, pork, poultry and ready-to-eat meals) artificially contaminated with sub-lethally injured Salmonella cells.     

Investments into forest biorefineries under different price and policy structures

Increasing scarcity of oil reserves and the high CO₂ emissions from using oil have contributed to the development of renewable biofuels. Pulp and paper mill integrated forest biorefineries offer one important means to increase biofuel production. This study analyzes the effects of policies to support biofuel production in the pulp and paper sector. We study the relative effectiveness of three biofuel supporting policy instruments, namely production subsidy, input subsidy and investment subsidy. We present a partial equilibrium pulp and paper market model with a biorefinery investment option. A numerical model is used to evaluate the impacts of policy instruments on wood prices, as well as input choices and investment strategies of pulp and paper industries. The data represent the Finnish pulp and paper sector. We evaluate the values and direct costs of the policy instruments in a situation of exogenous biofuel production targets. The direct costs of input and investment subsidies are higher than those of a production subsidy. With all the policy instruments, Finnish pulp and paper mills would invest in wood-gasifying technology, instead of black liquor based one. The number of biorefinery units is dependent on the subsidy type — investment and input subsidies are likely to result in more numerous but smaller biofuel production units than a production subsidy. With all the policy instruments the demand for wood increases in Finland leading to higher wood prices. This, in turn, could reflect negatively on the profitability of the pulp and paper industries. To a significant degree, the model and the results can be generalized to other countries and markets where integrated pulp and paper mills are operating.     

Caching video objects: layers vs versions?

Because Internet access rates are highly heterogeneous, many video content providers today make available different versions of the videos, with each version encoded at a different rate. Multiple video versions, however, require more server storage and may also dramatically impact cache performance in a traditional cache or in a CDN server. An alternative to versions is layered encoding, which can also provide multiple quality levels. Layered encoding requires less server storage capacity and may be more suitable for caching; but it typically increases transmission bandwidth due to encoding overhead. In this paper we compare video streaming of multiple versions with that of multiple layers in a caching environment. We examine caching and distribution strategies that use both versions and layers. We consider two cases: the request distribution for the videos is known a priori; and adaptive caching, for which the request distribution is unknown. Our analytical and simulation results indicate that mixed distribution/caching strategies provide the best overall performance.A shorter version of this work has appeared in Proc. of IEEE International Conference on Multimedia and Expo (ICME), Vol. 2, pages 45–48, Lausanne, Switzerland, August 2002     

Re‐calibration of Engelmaier's Model for Leadless,Lead‐free Solder Attachments

In this paper, the solder attachment fatigue model created by Werner Engelmaier is re‐calibrated in order to make it applicable in conjunction with leadless, lead‐free solder attachments. Sn3.8Ag0.7Cu solder attached ball‐grid‐array components are addressed to three thermal cycling test profiles. Based on the results, both physical and statistical parameters are obtained and compared with the values relevant to tin–lead solder assemblies. The validity of the statistical distribution selection (two‐parameter Weibull) is studied. Acceleration factors correlating different test profiles are obtained, and they are found to be only weakly dependent on the test vehicle type. Copyright © 2006 John Wiley & Sons, Ltd.     

A study of creative tension of engineering students in Korea

The aim of this research was to study the nature of creative tension of engineering students in South Korea. The creative tension was analyzed according to relevant competences in project managers' work role. Most of the subjects who participated in this study were part‐time students who worked as managers in manufacturing and industrial companies. The application used for collecting and analyzing data was the project managers' work‐role–based competence application, Cycloid. Data were collected on the Internet by self‐evaluation. The constructed competence model of the Cycloid application was added into the Evolute self‐evaluation system utilizing fuzzy logic. The application was able to identify students' current state and personal aims and the creative tension essential for their personal development. The Cycloid application can be utilized in developing the professional competencies of individuals, teams, and organizations. © 2007 Wiley Periodicals, Inc. Hum Factors Man 17: 511–520, 2007.     

Analyzing multilingual knowledge innovation in patents

In the process of analyzing knowledge innovation, it is necessary to identify the existing boundaries of knowledge so as to determine whether knowledge is new – outside these boundaries. For a patent to be granted, all aspects of the patent request must be studied to determine the patent innovation. Knowledge innovation for patent requests depends on analyzing current state of the art in multiple languages. Currently the process is usually limited to the languages and search terms the patent seeker knows. The paper describes a model for representing the patent request by a set of concepts related to a multilingual knowledge ontology. The search for patent knowledge is based on Fuzzy Logic Decision Support and allows a multilingual search. The model was analyzed using a twofold approach: a total of 104,296 patents from the United States Patent and Trademark Office were used to analyze the patent extraction process, and patents from the Korean, US, and Chinese patent offices were used in the analysis of the multilingual decision process. The results display high recall and precision and suggest that increasing the number of languages used only has minor effects on the model results.     

Cluster-Based RF Fingerprint Positioning Using LTE and WLAN Signal Strengths

Wireless Local Area Network (WLAN) positioning has become a popular localization system due to its low-cost installation and widespread availability of WLAN access points. Traditional grid-based radio frequency (RF) fingerprinting (GRFF) suffers from two drawbacks. First it requires costly and non-efficient data collection and updating procedure; secondly the method goes through time-consuming data pre-processing before it outputs user position. This paper proposes Cluster-based RF Fingerprinting (CRFF) to overcome these limitations by using modified Minimization of Drive Tests data which can be autonomously collected by cellular operators from their subscribers. The effect of environmental changes and device variation on positioning accuracy has been carried out. Experimental results show that even under these variations CRFF can improve positioning accuracy by 15.46 and 22.30% in 95 percentile of positioning error as compared to that of GRFF and K-nearest neighbour methods respectively.