A junctionless tunnel field effect transistor with low subthreshold slope

we demonstrate the design of a triple gate n-channel junctionless transistor that we call a junctionless tunnel field effect transistor (JLTFET). The JLTFET is a heavily doped junctionless transistor which uses the concept of tunneling, by narrowing the barrier between source and channel of the device, to turn the device ON and OFF. Simulation shows significant improvement compared to simple junctionless field effect transistor both in I _ON/I _OFF ratio and subthreshold slope. Here, junctionless tunnel field effect transistors with high-k dielectric and low-k spacers are demonstrated through simulation and shows an ON-current of 0.25 mA/μm for the gate voltage of 2 V and an OFF current of 3 pA/μm (neglecting gate leakage). In addition, our device shows optimized performance with high I _ON/I _OFF (～10⁹). Moreover, a subthreshold slope of 47 mV/decade is obtained for a 50 nm gate length of simulated JLTFET at room temperature which indicates that JLTFET is a promising candidate for switching performance.     

Temperature-dependent short-channel parameters of FinFETs

The remarkable development and continual proliferation of research in the nanotechnology field have led to improvement in the efficiency of elementary devices. To improve their performance, the parameters of such devices can be scaled down while optimizing their characteristics. However, this simultaneously results in degraded switching characteristics and the appearance of short-channel effects. Multigate-based fin-shaped field-effect transistors (FinFETs) represent a new option to address all these problems. However, thermal failure of FinFET devices under nominal operating conditions is an important issue in the design and implementation of high-speed semiconductor devices. It is also seen that bulk FinFETs exhibit better thermal performance compared with silicon-on-insulator FinFETs. In the work presented herein, various FinFET characteristics including the subthreshold swing, drain-induced barrier lowering, threshold voltage, and drain current were investigated as functions of temperature. The (effective) channel length is larger than the physical gate length (in off-state) due to the undoped underlap regions. This paper also discusses the effects of drain, source, and gate overlap.     

Dual material gate junctionless tunnel field effect transistor

This paper proposes a junctionless tunnel field effect transistor (JLTFET) with dual material gate (DMG) structure and the performance was studied on the basis of energy band profile modulation. The two-dimensional simulation was carried out to show the effect of conduction band minima on the abruptness of transition between the ON and OFF states, which results in low subthreshold slope (SS). Appropriate selection of work function for source and drain side gate metal of a double metal gate JLTFET can also significantly reduce the subthreshold slope (SS), OFF state leakage and hence gives improved I _ON/I _OFF.     

Shifting of research trends in islanding detection method - a comprehensive survey

The augmentation in electricity demand, power system privatization as well as efficacy of renewable resources has paved the way for power system companies and researchers to exploit the field of grid connected distributed generation (DG) and its issues, islanding being a dominant one. Several research works have been conducted to mitigate the issues of islanding detection (ID). In context of this, the paper gives a comprehensive review of islanding issues, standard test systems, criteria and shifting of research trends in islanding detection methods (IDMs). The significant contributions pertain to categorization of IDMs, evaluation of non-detection zone (NDZ) for each test system, disquisition on evolution and advancement of IDMs and its comparisons based on criteria such as NDZ, run on time, nuisance tripping percentage, applicability in multi DG system and implementation cost to draw out the strength and shortcomings of individual methods that will come to aid to the companies or researchers for establishing the applicability and appropriateness of such method for their concerned domain.     

Dual-Metal Double-Gate with Low-k/High-k Oxide Stack Junctionless MOSFET for a Wide Range of Protein Detection: a Fully Electrostatic Based Numerical Approach

Silicon - We investigate the performance of a dielectric modulated dual-metal double-gate with low-k/high-k oxide stack junctionless MOSFET (DM-DG-LK/HK-S JL-MOSFET) based sensor device for...     

Gold Drugs with {Au(PPh3)}+ Moiety: Advantages and Medicinal Applications

Following the success of Auranofin as an anti-arthritic drug, search for novel gold drugs has afforded a large number of [L−Au(PPh₃)] complexes that exhibit notable salutary effects. Unlike Au(III)-containing species, these gold complexes with {Au(PPh₃)}⁺ moiety are stable in biological media and readily exchange L with S- and Se-containing enzymes or proteins. Such exchange leads to rapid reduction of microbial loads or induction of apoptotic cell death at malignant sites. In many cases the lipophilic {Au(PPh₃)}⁺ moiety delivers a desirable toxic L to the specific cellular target in addition to exhibiting its own beneficial activity. Further research and utilization of this synthon in drug design could lead to novel chemotherapeutics for treatment of drug-resistant pathogens and cancers.     

Lipid adsorption on commercial silica hydrogels from hexane and changes in triglyceride complexes with time

The structures of and lipid complexes with two commercial silica hydrogels (Trisyl and Sorbsil 40), which contain about 60% moisture, were examined by diffuse reflectance Fourier transform infrared spectroscopy. The spectra suggested that Trisyl contained less moisture than Sorbsil 40. However, the silanol groups of Sorbsil 40 were more active in adsorbing oleic acid, triglyceride, and phosphatidylcholine (PC) from hexane than those of Trisyl. Both adsorbents strongly bound PC through the PC carbonyl and phosphate groups. Lipid adsorption from hexane solution by Trisyl depended solely on trapped moisture, while Sorbsil 40 used moisture and silanol groups on the silica surface. Spectra of triglyceride-silica hydrogel complexes, obtained 24 and 72 h after obtaining the initial spectra, showed that Sorbsil 40 adsorption was by Van der Waals forces, but the triglyceride reoriented over time with an increase in hydrogen bonding. In contrast, Trisyl initially adosorbed triglyceride by hydrogen bonding which was stable for at least 72 h.     

Role of charge and hydrophobicity in translocation of cell-penetrating peptides into Candida albicans cells

Although the interactions of cell-penetrating peptides (CPPs) with mammalian cells have been widely studied, much less is known about their interactions with fungal cells. To study how the properties of CPPs affect translocation into fungal cells, we designed variants of the peptides pVEC and SynB with altered levels of charge and hydrophobicity and evaluated the translocation of the variants into the important human fungal pathogen Candida albicans. Charge played a greater role in translocation efficacy of the peptides than hydrophobicity, with a higher net positive charge leading to higher level of translocation into C. albicans and a higher level of cytosolic localization. Hydrophobicity had little effect on translocation efficacy, but a low level of hydrophobicity did lead to increased vacuolar localization and an energy-dependent translocation mechanism. Our results suggest that CPPs can be designed for desired levels of cargo delivery into fungal cells and for desired translocation mechanisms.     

Enhancement of properties of recycled coarse aggregate concrete using bacteria

Due to rapid construction, necessity for raw materials of concrete, especially coarse aggregate, tends to increase the danger of early exhaustion of the natural resources. An alternative source of raw materials would perhaps delay the advent of this early exhaustion. Recycled coarse aggregate (RCA) plays a great role as an alternative raw material that can replace the natural coarse aggregate (NCA) for concrete. Previous studies show that the properties of RCA concrete are inferior in quality compared to NCA concrete. This article attempts to study the improvement of properties of RCA concrete with the addition of bacteria named as Bacillus subtilis. The experimental investigation was carried out to evaluate the improvement of the compressive strength, capillary water absorption, and drying shrinkage of RCA concrete incorporating bacteria. The compressive strength of RCA concrete is found to be increased by about 20% when the cell concentration of B. subtilis is 10⁶ cells/ml. The capillary water absorption as well as drying shrinkage of RCA are reduced when bacteria is incorporated. The improvement of RCA concrete is confirmed to be due to the calcium carbonate precipitation as observed from the microstructure studies carried out on it such as EDX, SEM, and XRD.