Expansion and length-dependent fragility of CTG repeats in yeast

Expansion of DNA trinucleotide repeats (TNRs) is the causative mutation in a growing number of human genetic diseases. Large expansions of a CTG tract were obtained and shown by genetic and physical assays to be length-dependent sites of chromosome breakage in Saccharomyces cerevisiae. Deletion of RAD27, which encodes a nuclease involved in Okazaki fragment processing, caused length-dependent destabilization of CTG tracts and a substantial increase in expansion frequency. The genetic assay described here can be used to evaluate other factors that induce TNR expansion or chromosome fragility in humans.     

Predictors of GBV-C infection among patients referred for renal transplantation

The etiology of liver disease remains unknown in about 4 to 23% of dialysis patients and 10 to 16% of renal transplant recipients. A search for other causative agents of liver disease led to the discovery of the GB group of viruses. We studied the association between the presence of GB virus C (GBV-C) infection, known risk factors for parenterally-transmitted infections and history or laboratory evidence of liver disease among end-stage renal disease (ESRD) patients referred for renal transplantation to the New England Organ Bank, MA. Stored sera from patients on the renal transplantation waiting list between November 1986 and June 1990 were tested for antibody to hepatitis C virus (HCV). Sera were available in 1544 of 3243 (48%) patients, and anti-HCV was detected by ELISA3 in 287 (19%). All 287 anti-HCV positive patients formed the anti-HCV positive cohort and 286 randomly selected anti-HCV negative patients formed the anti-HCV negative cohort (573 patients overall). Additional sera were available for GBV-C RNA testing in 465 of 573 (81%) patients, and GBV-C RNA was detected by RT-PCR in 146. The overall extrapolated prevalence of serum GBV-C RNA was 29%. The prevalence of serum GBV-C RNa among anti-HCV positive patients (35%) was not significantly different from that among anti-HCV negative patients (29%; P = 0.22). In a univariate analysis, compared to patients without GBV-C RNA, patients with serum GBV-C RNA were younger [odds ratio (OR) 0.98 per year of age, P = 0.01], had a lower proportion of males (OR 0.64, P = 0.03), lower proportion of patients with diabetes mellitus (OR 0.44, P = 0.01), higher proportion of patients with a previous transplantation (OR 1.53, P = 0.04), longer duration of dialysis at the time of enrollment (OR 1.004 per month on dialysis, P = 0.03), and a higher proportion of patients with history of transfusions (OR 4.58, P = 0.01). Serum GBV-C RNA was not associated with a significantly increased OR for history of liver disease or non-A, non-B hepatitis, or elevated serum alanine aminotransferase levels. In a step-wise multivariate regression analysis, a younger age (OR 0.98 per year of age, P = 0.03), and history of blood transfusions (OR 3.89, P = 0.03) were associated with an increased OR for serum GBV-C RNA, while diabetes mellitus was associated with a decreased OR for GBV-C RNA (OR 0.47, P = 0.01). Anti-HCV was not a predictor of serum GBV-C RNA (OR 1.07, P = 0.77). The results of this study support the fact that GBV-C is a parenterally transmitted virus and shed light on the modes of transmission of GBV-C among ESRD patients. However, the association with liver disease remains to be established.     

Ultrasonically activated shears in thyroid surgery

BACKGROUND: Ultrasonically activated shears (UAS) have been documented to be both safe and fast devices in laparoscopic surgery. We studied whether the use of UAS would have some advantage in thyroid surgery. METHODS: Thyroidectomies, performed by one senior endocrine surgeon between December 1996 and February 1997, were retrospectively matched, with patients operated on by the same surgeon using the conventional method. RESULTS: Six pairs of total thyroidectomies and one pair of lobectomies could be matched. Mean operating time was 100 minutes for the patients operated on with the UAS and 154 minutes for the patients operated on with the conventional method. The mean operating time with the UAS was thus on average 64.6% of the operation time with the conventional method, with a 95% confidence interval from 50.1% to 83.5% (t = 4.00, 6 df, P = 0.007). CONCLUSIONS: In this material the use of UAS reduced significantly operating time in thyroidectomies.     

(R,R)-2,2'-[1,2-ethanediylbis[imino(1-methyl-2,1-ethanediyl)]]- bis[5-nitro-1H-benz[de]isoquinoline-1,3-(2H)-dione] dimethanesulfonate (DMP 840), a novel bis-naphthalimide with potent nonselective tumoricidal activity in vitro

(R,R)-2,2'-[1,2-ethanediylbis[imino(1-methyl-2,1-ethanediyl)]]- bis[5-nitro-1H-benz[de]isoquinoline-1,3-(2H)-dione] dimethanesulfonate (DMP 840), is a bis-naphthalimide anticancer tumoricidal agent currently in phase I clinical trials. DMP 840 exhibits curative activity in human tumor xenografts, where it shows selectivity for human solid tumors over murine leukemias. In contrast to the selectivity found for DMP 840 in vivo, DMP 840 exhibits potent antiproliferative activity in vitro against a variety of human and murine leukemia and solid tumor cell lines in culture, with inhibitory doses that reduce the number of treated cells to one half (IC50) values ranging from 2.3 to 53 nM. DMP 840 was growth inhibitory to three doxorubicin-resistant cell lines with IC50 values also in the nanomolar range. Clonogenic survival experiments showed that DMP 840 was equally cytotoxic to both exponentially growing and quiescent human clone A colon carcinoma cells. A 1-h incubation of DMP 840 (1.22-12 microM) caused 5-log cell kill in KB-3-1 human epidermoid carcinoma, clone A human colon carcinoma, and L1210 murine leukemia cell lines. The rapid cell killing by DMP 840 in clonogenic survival experiments and initial mechanism of action studies was consistent with a DNA-interactive mechanism for DMP 840 cytotoxicity. Mechanism of action studies in L1210 leukemia cells demonstrated that DMP 840 inhibited the incorporation of thymidine and uridine into DNA and RNA with IC50 values of 0.55 and 0.08 microM, respectively. DMP 840 produced DNA single-strand breaks in a dose-dependent manner. Double-strand breaks were not observed with DMP 840 treatment, even at higher concentrations of compound. Chinese hamster ovary (CHO) and P388 cells resistant to camptothecin and containing a mutant form of topoisomerase I were also used to evaluate whether DMP 840 was cross-resistant with agents active against topoisomerase I. While the CHOR line was 163-fold resistant to camptothecin, the CHOR line was only 1.7-fold resistant to DMP 840. In summary, DMP 840 is a DNA-interactive agent that demonstrates excellent antiproliferative activity in vitro against cultured tumor cells from both human and murine sources. Its mechanism of tumoricidal activity may be novel.     

Correlation and prediction of dense fluid transport coefficients. I. n-alkanes

Recent accurate measurements of the self-diffusion coefficient for n-hexadecane and n-octane and of the viscosity coefficient for n-heptane, n-nonane, and n-undecane over wide pressure ranges have been used to provide a critical test of a previously described method, based on consideration of hard-sphere theory, for the correlation of transport coefficient data. It is found that changes are required to the universal curve for the reduced viscosity coefficient as a function of reduced volume and, also, to the parameters R _D, R , and R which were introduced to account for effects of nonspherical molecular shape. The scheme now accounts most satisfactorily for the self-diffusion, viscosity, and thermal conductivity coefficient data for all n-alkanes from methane to hexadecane at densities greater than the critical density.     

Structural evolution in gel-derived mullite precursors

The evolution of mullite from organo-metal gel precursors above 700 °C is found to be strongly influenced in both gel pieces and powdered samples by the thermal pretreatment at lower temperatures. Under the present conditions, the optimum preheating temperature was found to be 350 °C, at which temperature an anomalously high concentration was found of an Al species with a characteristic ²⁷Al magic-angle spinning NMR resonance at about 30 ppm. Such Al sites are often described as pentaco-ordinated, but an alternative assignment is considered. The optimum temperature for the formation of this Al site is also optimal for the catalytic formation of aromatic molecules from the residual organic fragments and/or solvent present. Mass spectrometry shows that under the present reaction conditions, these aromatics are thermally stable up to at least 900 °C in air, and the prolonged presence of their decomposition products (CO and water) could facilitate the transformation of the gel to crystalline mullite. The ²⁹Si NMR spectra indicate at least three different Si environments, including one which may arise from the formation of silicon oxycarbide glasses in these gels.     

The distribution and phylogenetic significance of desmethylsterols inChenopodium andAtriplex: Coexistence of Δ7- and Δ5 -sterols

Twenty-one species in the Chenopodiaceae were analyzed for sterol composition. In ten of eleven species ofChenopodium, the major desmethylsterols were Δ⁷-sterols accompanied by lower proportions of Δ⁵-sterols. InC. fremontii this pattern was reversed. The sterol profiles of five species ofAtriplex were characterized by the coexistence of Δ⁷- and Δ⁵-sterols in ratios of 0.3∶1 to 0.4∶1. MaleAtriplex plants contained higher proportions of Δ⁵-sterols than femaleAtriplex plants. OneCeratoides and twoSalicornia species contained Δ⁵-sterols as their predominant sterols.     

Glutarimide acrylic copolymer: A new route to high heat PVC

PVC is the second largest polymer produced and used in the U.S. It is a self-extinguishing material with excellent chemical resistance and good dimensional stability. It's greatest asset, however, is it's versatility. By specifically formulating PVC with the numerous types of additives available, a balance of properties can be tailored for a wide range of applications. The most serious disadvantage of PVC is it's low heat resistance which limits the service temperature of finished articles to about 70°C. Now an additive is available that can be formulated with PVC to form miscible, transparent blends with increased service temperature. With proper formulating, the higher HDT can be achieved without sacrificing other properties. It is especially important in clear PVC applications where no increase in haze was noted with the addition of the acrylic imide copolymer. Indications are that substantial market opportunities exist for a high heat PVC. Major market segments include clear packaging with it's need for hot-fill containers, building products where the desire to use darker colors provides the driving force, and in custom injection molding applications where improved heat resistance would allow vinyl to compete more effectively with FR-styrenics.     

Quantitative Characterization of Indentation Crack Path in a Cubic Zirconia-10 vol% Alumina Composite

Stereological measurements were performed to characterize the indentation crack path in a cubic zirconia-10 vol% alumina (c-ZrO₂-10 vol% Al₂O₃) composite. Cracks were generated using Vickers indentation, and the crack propagation behavior was characterized as a function of the indentation loading/unloading rates. Cracks that were produced by Vickers indentation formed at higher crack velocities as the loading/unloading rates increased. The amount of contact between the crack and the Al₂O₃ particles increased as the indentation rate decreased. The total number of crack-particle interactions per unit crack length also increased as the indentation rate decreased, because of an increase in the number of particles that were fractured per unit crack length, whereas the number of particles that were debonded remained relatively constant as the indentation rate changed. These results suggest that residual thermal mismatch stresses have predominant control of the crack path at lower crack velocities (low indentation loading/unloading rate), whereas elastic mismatch stresses predominate at higher crack velocities (high indentation loading/unloading rate).