Self‐Assembly of Mechanoplasmonic Bacterial Cellulose–Metal Nanoparticle Composites

Nanocomposites of metal nanoparticles (NPs) and bacterial nanocellulose (BC) enable fabrication of soft and biocompatible materials for optical, catalytic, electronic, and biomedical applications. Current BC–NP nanocomposites are typically prepared by in situ synthesis of the NPs or electrostatic adsorption of surface functionalized NPs, which limits possibilities to control and tune NP size, shape, concentration, and surface chemistry and influences the properties and performance of the materials. Here a self‐assembly strategy is described for fabrication of complex and well‐defined BC–NP composites using colloidal gold and silver NPs of different sizes, shapes, and concentrations. The self‐assembly process results in nanocomposites with distinct biophysical and optical properties. In addition to antibacterial materials and materials with excellent senor performance, materials with unique mechanoplasmonic properties are developed. The homogenous incorporation of plasmonic gold NPs in the BC enables extensive modulation of the optical properties by mechanical stimuli. Compression gives rise to near‐field coupling between adsorbed NPs, resulting in tunable spectral variations and enhanced broadband absorption that amplify both nonlinear optical and thermoplasmonic effects and enables novel biosensing strategies.     

Bubble Dynamics in Turbulent Duct Flows: Lattice-Boltzmann Simulations and Drop Tower Experiments

Lattice-Boltzmann simulations of a turbulent duct flow have been carried out to obtain trajectories of passive tracers in the conditions of a series of microgravity experiments of turbulent bubble suspensions. The statistics of these passive tracers are compared to the corresponding measurements for single-bubble and bubble-pair statistics obtained from particle tracking techniques after the high-speed camera recordings from drop-towers experiments. In the conditions of the present experiments, comparisons indicate that experimental results on bubble velocity fluctuations are not consistent with simulations of passive tracers, which points in the direction of an active role of bubbles. The present analysis illustrates the utility of a recently introduced experimental setup to generate controlled turbulent bubble suspensions in microgravity.     

High Spatial Resolution Mapping of Localized Surface Plasmon Resonances in Single Gallium Nanoparticles

Plasmonics has emerged as an attractive field driving the development of optical systems in order to control and exploit light–matter interactions. The increasing interest around plasmonic systems is pushing the research of alternative plasmonic materials, spreading the operability range from IR to UV. Within this context, gallium appears as an ideal candidate, potentially active within a broad spectral range (UV–VIS–IR), whose optical properties are scarcely reported. Importantly, the smart design of active plasmonic materials requires their characterization at high spatial and spectral resolution to access the optical fingerprint of individual nanostructures, attainable by transmission electron microscopy techniques (i.e., by means of electron energy‐loss spectroscopy, EELS). Therefore, the optical response of individual Ga nanoparticles (NPs) by means of EELS measurements is analyzed, in order to spread the understanding of the plasmonic response of Ga NPs. The results show that single Ga NPs may support several plasmon modes, whose nature is extensively discussed.     

Ratiometric Nanothermometer Based on a Radical Excimer for In Vivo Sensing (Small 32/2023)

Ratiometric fluorescent nanothermometers with near-infrared emission play an important role in in vivo sensing since they can be used as intracellular thermal sensing probes with high spatial resolution and high sensitivity, to investigate cellular functions of interest in diagnosis and therapy, where current approaches are not effective. Herein, the temperature-dependent fluorescence of organic nanoparticles is designed, synthesized, and studied based on the dual emission, generated by monomer and excimer species, of the tris(2,4,6-trichlorophenyl)methyl radical (TTM) doping organic nanoparticles (TTMd-ONPs), made of optically neutral tris(2,4,6-trichlorophenyl)methane (TTM-αH), acting as a matrix. The excimer emission intensity of TTMd-ONPs decreases with increasing temperatures whereas the monomer emission is almost independent and can be used as an internal reference. TTMd-ONPs show a great temperature sensitivity (3.4% K⁻¹ at 328 K) and a wide temperature response at ambient conditions with excellent reversibility and high colloidal stability. In addition, TTMd-ONPs are not cytotoxic and their ratiometric outputs are unaffected by changes in the environment. Individual TTMd-ONPs are able to sense temperature changes at the nano-microscale. In vivo thermometry experiments in Caenorhabditis elegans (C. elegans) worms show that TTMd-ONPs can locally monitor internal body temperature changes with spatio-temporal resolution and high sensitivity, offering multiple applications in the biological nanothermometry field.     

Scaffolds with Tunable Properties Constituted by Electrospun Nanofibers of Polyglycolide and Poly(ε‐caprolactone)

Electrospun scaffolds constituted by different mixtures of two biodegradable polyesters are prepared. Specifically, materials with well differentiated properties can be derived from the blending of hydrophilic polyglycolide (PGA) and hydrophobic poly(ε‐caprolactone) (PCL), which are also two of the most applied polymers for biomedical uses. Electrospinning conditions are selected in order to get homogeneous and continuous fibers with diameters in the nano/micrometric range. These conditions are also applied to load the different scaffolds with curcumin (CUR) and polyhexamethylene biguanide (PHMB) as hydrophobic and hydrophilic bactericide compounds, respectively. Physicochemical characterization of both unloaded and loaded scaffolds is performed and involved Fourier transform infrared and ¹H NMR spectroscopies, morphological observations by scanning electron microscopy, study of thermal properties through calorimetry and thermogravimetric analysis, and evaluation of surface characteristics through contact angle measurements. Release behavior of the loaded scaffolds is evaluated in two different media. Results point out a well differentiated behavior where the delivery of CUR and even PHMB are highly dependent on the PGA/PCL ratio, the capability of the medium to swell the polymer matrix, and the diffusion of the selected solvent into the electrospun fibers. All samples show a bactericide effect in both hydrophilic cell culture and hydrophobic agar media.     

Incorporation of chloramphenicol and captopril into poly(GL)‐b‐poly(GL‐co‐TMC‐co‐CL)‐b‐poly(GL) monofilar surgical sutures

Incorporation of chloramphenicol and captopril into coated and uncoated monofilament sutures was evaluated, as well as the derived bactericide and wound healing effects. To this end, a commercially available suture and an amorphous random copolymer constituted by trimethylene carbonate and lactide units were considered. The suture had a segmented architecture based on polyglycolide hard blocks and a soft block constituted by glycolide, trimethylene carbonate and ε‐caprolactone units. Chloramphenicol was better loaded when the coating copolymer was employed due to its protective effect whereas captopril showed an opposite behavior due to partial solubilization during immersion in the coating bath. Interestingly, the release behavior was very different for the two studied drugs since a significant retention of chloramphenicol was always detected, suggesting the establishment of interactions between drug and copolymers. On the other hand, delivery of captopril showed a typical dose dependent behavior. A low in vitro toxicity of the two drugs was determined considering both epithelial‐like and fibroblast‐like cells. Bactericide effect of chloramphenicol against Gram‐negative and Gram‐positive bacteria was demonstrated at a dose that was non‐toxic for all assayed cells. An accelerating wound healing effect of captopril was also demonstrated for early events. In this case, the use of a coating copolymer was fundamental to avoid cytotoxic effects on highly loaded sutures. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44762.     

Sensing Pollution on Online Social Networks: A Transportation Perspective

Transportation policy and planning strategies, as well as Intelligent Transportation Systems (ITS), can all play important roles in decreasing pollution levels and their negative effects. Interestingly, limited effort has been devoted to exploring the potential of social network analysis in such context. Social networks provide direct feedback from people and, hence, potentially valuable information. A post telling how a person feels about pollution at a given time at a given location, could be useful to policy-makers, planners or environmentally-aware ITS designers. This work verifies the feasibility of sensing air pollution from social networks and of integrating such information with real sensors feeds, unveiling how people advertise such phenomenon, acting themselves as smart objects, and how online posts relate to true pollution levels. This work explores a new dimension in pollution sensing for the benefit of environmental and transportation research in future smart cities, confronting over 1,500,000 posts and pollution readings obtained from governmental on-the-field sensors over a one-year span.     

Titration force microscopy on supported lipid bilayers

The use of chemically modified atomic force microscopy (AFM) probes allows us to measure the surface charges of supported planar lipid bilayers with high sensitivity through the force spectroscopy operation mode. By controlling the chemistry of the tip, we can perform a classical analytical chemistry titration where the titration agent is a weak acid (attached to the AFM tip) with the particularity of being performed in surface rather than in solution and, especially, at the nanometric scale. Thus, the AFM tip acts as a real "nanosensor". The approaching curves of the force plots reveal that electrostatic interactions between the tip and the supported membrane play a key role. Besides, the plot of the adhesion force (measured from the retracting curve of the force plots) versus pH displays a nonsigmoidal shape with a peak in the adhesion force attributed to high-energy hydrogen bonds. One of these peaks corresponds to the pKa of the surface under study and the other to the pKa of the titrating probe attached to the tip.     

Development of a specially tailored local drug delivery system for the prevention of fibrosis after insertion of cochlear implants into the inner ear

A cochlear implant (CI)-associated local drug delivery system based on dexamethasone (DMS) was developed with the purpose to inhibit the growth of fibrotic tissue which influences the signal transmission from the CI to the neurons of the inner ear. For the realization of a targeted DMS delivery the following concepts were combined: modification of the silicone-based electrode carrier by incorporation of DMS and a DMS-containing polymeric coating chemically attached on the surface of the electrode carrier. It was demonstrated that the coated CI showed a high coating stability in a simulated implantation procedure. The in vitro drug release studies in a quasi-stationary model revealed a faster DMS release in the initial phase originating from the DMS-containing coatings and then a lower and sustained DMS release originating from the DMS-loaded silicone carrier. The performed in vitro biocompatibility study confirmed that the released DMS was non-toxic for cultured spiral ganglion cells.