Numerical investigation of the error on flow measurements due to exhaust gas heating and cooling in the SBI‐configuration

The possible flow measurement error due to heating or cooling of exhaust gases in the Single‐Burning‐Item (SBI) test is estimated from numerical experiments. It is illustrated that there is no one‐to‐one correspondence between the velocity profile shape and the instantaneous Reynolds number, due to the time‐dependent temperature and density profile evolution in the exhaust gas pipe. A non‐ambiguous relation is found between the velocity profile shape and an ‘effective’ Reynolds number, based on the turbulent viscosity. Maximum variations of the velocity correction factors, relating the mean velocity to the velocity on the pipe axis, are found to be in the order of 2% for limiting circumstances for the SBI test. The primary effect is caused by instantaneous Reynolds number variations. The effect of heating or cooling of the flow by the hot or cold pipe is noticeable, too. The statements are proved to be valid independent of the computational grid, the turbulence model and the time steps taken to obtain the numerical solutions. Copyright © 2006 John Wiley & Sons, Ltd.     

An automated, parallel processing approach to biomolecular sample preparation

Sample preparation for DNA and RNA assays is a prime candidate for laboratory automation. A novel, parallel processing device that performs the three separate liquid-handling functions necessary for such sample preparation-dispensing, pipetting, and pressurizing-is presented. The device comprises an array of fine nozzles connected by fluidic channels to automatically and precisely distribute flow between one source and an array of points. The design principles, as well as the experimental and computational methods used to develop the device, are described. Test results, including accuracy, uniformity, volume range, and timing, are presented. The functionality of the device is demonstrated by performing a solid-phase extraction of DNA with two types of microcolumns.     

Preparation and properties of close-packed composite materials

Monodisperse silica particles of about 0.3m diameter are suspended in methacrylate monomer using a carefully selected dispersant. Many steric dispersants are hydrocarbon chains with a reactive end-group. These are not effective as dispersants for silica in moderately polar solvents, such as esters and the methacrylate monomers. Good dispersion was obtained with a methacrylate polymer terminated by a chlorosilane end group. Settling or centrifugation of these unagglomerated dispersions gives well-packed particle beds. Polymerization of the surrounding monomer produces composite materials with high packing fractions and a high degree of regularity. Moduli and strengths of these composites are reported.     

The coming revolution in information systems

A revolution is coming--is absolutely essential--in healthcare. The chief information officer must be among the generals who plan battle strategies and lead the campaigns to fight inflating costs and overwhelming demands. Without their leadership and expertise, armies of healthcare providers are destined to fail, and legions of citizens will fall victim to a system inadequate to meet their needs.     

Subcritical crack growth in partially stabilized ZrO2(MgO)

The room temperature slow crack growth resistance in air ( 50% relative humidity) and in water for large cracks in MgO-partially stabilized zircoba (PSZ) improves with increase in critical fracture toughness,K _lc. Ageing the as-fired PSZ at 1400° C for 8 h results in decreasing K_lc from 8.5 MPa m^1/2 to 6 M Pa M^1/2. The ageing treatment also promotes the growth of eutectoid decomposition products on grain boundaries that is accompanied by a decrease in the dependence (A the change in Region I crack velocity with a change in the applied stress intensity. Calculated times to failures are markedly decreased in the aged as compared to the as-fired PSZ ceramic.     

Comparison of mainline and alternate approaches to fusion energy

The tokamak and tandem mirror concepts are compared with alternate confinement concepts using the criteria established in DOE/ET-0047, An Evaluation of Alternate Magnetic Fusion Concepts 1977. The concepts are evaluated and rated in each of three broad categories: confidence in physics and technology, and reactor desirability. The STARFIRE and MARS reactors are used as a basis for comparing the mainline tokamak and tandem mirror concepts with the alternate concepts evaluated in DOE/ET-0047. Two recent alternate concepts, theohmically heated toroidal experiment (OHTE) and thecompact reversed field pinch reactor (CRFPR), are also evaluated. Results indicate that the physics of the mainline tokamaks and tandem mirrors is better understood than that of most alternate concepts. Both mainline concepts rank near the middle for technology requirements, and both rank near or at the bottom when compared with the reactor desirability of alternate concepts.     

A 2.5n lower bound on the monotone network complexity of T 3 n

Summary The k-th threshold function, T _k ⁿ , is defined as: where x _i{0,1} and the summation is arithmetic. We prove that any monotone network computing T _3/n(x ₁,...,x _n) contains at least 2.5n-5.5 gates.This research was supported by the Science and Engineering Research Council of Great Britain, UK     

Gezielte Nutzung biologischer Systeme

Directed exploitation of biological systems . During the past few decades, our knowledge of molecular process responsible for genetics has increased dramatically. Discovery of the giant molecule deoxyribonucleic acid – abbreviated as DNA – as the carrier of genetic information heralded in a development which nowadays permits us to effect directed changes in the genetic material of an organism. Thus we can provide easily cultured microorganisms with genes which were previously located in a completely different genetic environment. This helps us to obtain high yields of proteins or other substances which were formerly very difficult to obtain. Higher organisms such as animals and plants can also undergo modification of their genetic equipment. This adds a new dimension to the breeding of such species. Above all, genetic engineering provides new insights into the enormously complex interplay of molecules which go to make up a living cell. The resulting understanding of life processes on a molecular level permits recognition of malfunction and therapy of the ensuring disease by new drugs. In addition to these positive aspects, genetic engineering provides scope for conducting experiments whose ethical implications demand very earnest consideration.     

Keeping properties of edible oils—Part I. The use of accelerated tests for assessment of the keeping properties of oils and the value of antioxidants

Assessment of oil quality by two accelerated oxidation tests gave little or no correlation with organoleptic asessment during storage. Improvements in quality of oils refined in the factory, to which antioxidants had been added, are indicated by the accelerated tests but are not reproduced in normal storage. Howver a treatment of the oils with alumina, as a part of the refining process replacing earth bleaching, appears to remove antagonistic factors, and under these circumstances the addition of antioxidant has a pronounced effect.