Enhancement of Thermopower of TAGS‐85 High‐Performance Thermoelectric Material by Doping with the Rare Earth Dy

Enhancement of thermopower is achieved by doping the narrow‐band semiconductor Ag_6.52Sb_6.52Ge_36.96Te₅₀ (acronym TAGS‐85), one of the best p‐type thermoelectric materials, with 1 or 2% of the rare earth dysprosium (Dy). Evidence for the incorporation of Dy into the lattice is provided by X‐ray diffraction and increased orientation‐dependent local fields detected by ¹²⁵Te NMR spectroscopy. Since Dy has a stable electronic configuration, the enhancement cannot be attributed to 4f‐electron states formed near the Fermi level. It is likely that the enhancement is due to a small reduction in the carrier concentration, detected by ¹²⁵Te NMR spectroscopy, but mostly due to energy filtering of the carriers by potential barriers formed in the lattice by Dy, which has large both atomic size and localized magnetic moment. The interplay between the thermopower, the electrical resistivity, and the thermal conductivity of TAGS‐85 doped with Dy results in an enhancement of the power factor (PF) and the thermoelectric figure of merit (ZT) at 730 K, from PF = 28 μW cm^?1 K^?2 and ZT ≤ 1.3 in TAGS‐85 to PF = 35 μW cm^?1 K^?2 and ZT ≥ 1.5 in TAGS‐85 doped with 1 or 2% Dy for Ge. This makes TAGS‐85 doped with Dy a promising material for thermoelectric power generation.     

X-ray or UV adjustment of MOS threshold voltage: Analytical and numerical modeling

A model is formulated that describes how radiation-induced charge accumulates in the gate oxide of a MOS structure and how it decays through tunneling and thermal emission. The model is used in a numerical analysis of the x-ray or UV adjustment of threshold voltage in MOS-circuit manufacture. The limits of this process technique are evaluated.     

Substrate-Independent and Re-Writable Surface Patterning by Combining Polydopamine Coatings,Silanization, and Thiol-Ene Reaction

Polydopamine coating is a unique, simple, and substrate-independent surface functionalization strategy. Techniques for secondary functionalization, patterning, and re-functionalization of polydopamine modified materials are important to broaden the scope of applications of such materials in a variety of fields. Here, a facile and substrate-independent strategy for surface functionalization and patterning is presented. This approach combines the advantages of three important methods: facile and substrate-independent polydopamine coating, versatile gas phase silanization, and rapid thiol-ene photoclick reaction for patterning. They demonstrate equally efficient functionalization and patterning of diverse materials, such as glass, polytetrafluoroethylene, aluminum, polypropylene, or polyethylene. They also show the possibility of controlled chemical removal of the patterns or surface functionalization by treatment with tetrabutylammonium fluoride, which allows re-modification or re-patterning of the substrate. Thus, this universal and powerful approach for substrate independent surface modification and patterning can significantly facilitate the development of novel functional materials and devices useful for various applications.     

Controlling a Semiconductor Optical Amplifier Using a State-Space Model

We derive nonlinear and linear state-space control models for a multichannel semiconductor optical amplifier. Verified against the governing partial differential equations through simulation, the linear model tracks modulations up to 20% qualitatively well. Linear feedback control is then employed to design two interchannel crosstalk suppressing systems, one using state feedback into the electronic drive current and the other using optical output feedback into an optical control channel; the controller designed with the linear model is seen to work well even with 100% modulations of the nonlinear system. This linear state-space model opens the way for further robust analysis, design and control of integrated active photonic circuits     

0.18μm铜金属双重镶嵌工艺中空间成像套刻精度分析

由于空间成像套刻(Overlay)技术的预算随集成电路(IC)设计规范的紧缩而吃紧,因此,Overlay测量技术准确度的重要意义也随之提高。通过对后开发(AfterDevelopDI)阶段和后蚀刻(AfterEtchFI)阶段的Overlay测量结果进行比较,研究了0.18μm设计规范下的铜金属双重镶嵌工艺过程中的Overlay准确度。在确保对同一个晶圆进行后开发(DI)阶段和后蚀刻(FI)阶段测试的条件下,我们对成品晶圆的5个工艺层进行了比较。此外,还利用CD-SEM(线宽-扫描电子显微镜)测量了某个工艺层(PolyGate)上的芯片内Overlay,并与采用分割线方法的光学Overlay测量结果进行了比较。发现对芯片内overlay的校准存在着严重的局限性,即在应用CD-SEM时缺乏合适的结构进行Overlay测量。我们还将继续为大家提供定量的比较结果,同时也会向大家推荐组合的CD-SEM测量结构,使其能够被应用到今后的光刻设计中。     

Regularization techniques in realistic Laplacian computation

This paper explores regularization options for the ill-posed spline coefficient equations in the realistic Laplacian computation. We investigate the use of the Tikhonov regularization, truncated singular value decomposition, and the so-called lambda-correction with the regularization parameter chosen by the L-curve, generalized cross-validation, quasi-optimality, and the discrepancy principle criteria. The provided range of regularization techniques is much wider than in the previous works. The improvement of the realistic Laplacian is investigated by simulations on the three-shell spherical head model. The conclusion is that the best performance is provided by the combination of the Tikhonov regularization and the generalized cross-validation criterion-a combination that has never been suggested for this task before.     

UV‐Triggered Polydopamine Secondary Modification: Fast Deposition and Removal of Metal Nanoparticles

Since the first report in 2007, polydopamine (PDA) coating has shown great potential as a general and versatile method to create functional nanocoatings on arbitrary substrates. Slow kinetics and poor controllability of the coating and secondary modification processes, however, have limited the further development of this attractive method. In this work, it is demonstrated that UV irradiation at 365 nm significantly accelerates the process of secondary modification of a PDA‐coated surface. The kinetics of both thiol and amine modifications of PDA are increased 12‐fold via UV irradiation, while the kinetics of metal ion reduction at the PDA interface is increased more than 550 times. Moreover, it is demonstrated that irradiating a PDA/metal nanoparticle composite surface with UV light at 254 nm leads to dissolution of the deposited metal nanoparticles (MNPs). Finally, grayscale metallic patterns, dynamic deposition, and removal of MNPs on PDA surface are realized with the proposed method.     

Single Cell Bioprinting with Ultrashort Laser Pulses

Tissue engineering requires the precise positioning of mammalian cells and biomaterials on substrate surfaces or in preprocessed scaffolds. Although the development of 2D and 3D bioprinting technologies has made substantial progress in recent years, precise, cell-friendly, easy to use, and fast technologies for selecting and positioning mammalian cells with single cell precision are still in need. A new laser-based bioprinting approach is therefore presented, which allows the selection of individual cells from complex cell mixtures based on morphology or fluorescence and their transfer onto a 2D target substrate or a preprocessed 3D scaffold with single cell precision and high cell viability (93–99% cell survival, depending on cell type and substrate). In addition to precise cell positioning, this approach can also be used for the generation of 3D structures by transferring and depositing multiple hydrogel droplets. By further automating and combining this approach with other 3D printing technologies, such as two-photon stereolithography, it has a high potential of becoming a fast and versatile technology for the 2D and 3D bioprinting of mammalian cells with single cell resolution.     

A three-dimensional thermal and electromagnetic model of whole limbheating with a MAPA

Previous studies by the authors have shown that if properly implemented, the Pennes assumptions can be applied to quantify bioheat transfer during extremity heating. Given its relative numerical simplicity and its ability to predict temperatures in thermoregulated tissue, the Pennes model of bioheat transfer was utilized in a three-dimensional thermal model of limb heating. While the arterial blood temperature was assumed to be radially uniform within a cross section of the limb, axial gradients in the arterial and venous blood temperatures were computed with this three-dimensional model. A realistically shaped, three-dimensional finite element model of a tumor-bearing human lower leg was constructed and was "attached" mathematically to the whole body thermal model of man described in previous studies by the authors. The central as well as local thermoregulatory feedback control mechanisms which determine blood perfusion to the various tissues and rate of evaporation by sweating were input into the limb model. In addition, the temperature of the arterial blood which feeds into the most proximal section of the lower leg was computed by the whole body thermal model. The variations in the shape of the tissues which comprise the limb were obtained from computerized tomography scans. Axial variations in the energy deposition patterns along the length of the limb exposed to a miniannular phased array (MAPA) applicator were also input into this model of limb heating. Results indicate that proper positioning of the limb relative to the MAPA is a significant factor in determining the effectiveness of the treatment. A patient-specific hyperthermia protocol can be designed using this coupled electromagnetic and thermal model.     

Flexible organic P3HT:PCBM bulk-heterojunction modules with more than 1 year outdoor lifetime

Flexible organic solar cells and modules based on P3ht:PCBM bulk-heterojunctions were fabricated and their lifetime was investigated under laboratory and outdoor conditions. In the laboratory cells were exposed to 1 sun illumination at 65 °C in order to accelerate the degradation. The outdoor behavior of modules was investigated at the Konarka rooftop testing setup in Lowell, MA (USA). We show that these flexible polymer solar cells have a good light stability, passing 1000 h under accelerated light soaking conditions in the laboratory, and that flexible modules survived over 1 year of outdoor exposure without performance losses.