Ordinary Gasoline Emissions Induce a Toxic Response in Bronchial Cells Grown at Air-Liquid Interface

Gasoline engine emissions have been classified as possibly carcinogenic to humans and represent a significant health risk. In this study, we used MucilAir™, a three-dimensional (3D) model of the human airway, and BEAS-2B, cells originating from the human bronchial epithelium, grown at the air-liquid interface to assess the toxicity of ordinary gasoline exhaust produced by a direct injection spark ignition engine. The transepithelial electrical resistance (TEER), production of mucin, and lactate dehydrogenase (LDH) and adenylate kinase (AK) activities were analyzed after one day and five days of exposure. The induction of double-stranded DNA breaks was measured by the detection of histone H2AX phosphorylation. Next-generation sequencing was used to analyze the modulation of expression of the relevant 370 genes. The exposure to gasoline emissions affected the integrity, as well as LDH and AK leakage in the 3D model, particularly after longer exposure periods. Mucin production was mostly decreased with the exception of longer BEAS-2B treatment, for which a significant increase was detected. DNA damage was detected after five days of exposure in the 3D model, but not in BEAS-2B cells. The expression of CYP1A1 and GSTA3 was modulated in MucilAir™ tissues after 5 days of treatment. In BEAS-2B cells, the expression of 39 mRNAs was affected after short exposure, most of them were upregulated. The five days of exposure modulated the expression of 11 genes in this cell line. In conclusion, the ordinary gasoline emissions induced a toxic response in MucilAir™. In BEAS-2B cells, the biological response was less pronounced, mostly limited to gene expression changes.     

In Situ Liquid-Cell TEM Observation of Multiphase Classical and Nonclassical Nucleation of Calcium Oxalate

Calcium oxalate (CaOx) is the major phase in kidney stones and the primary calcium storage medium in plants. CaOx can form crystals with different lattice types, water contents, and crystal structures. However, the conditions and mechanisms leading to nucleation of particular CaOx crystals are unclear. Here, liquid-cell transmission electron microscopy and atomistic molecular dynamics simulations are used to study in situ CaOx nucleation at different conditions. The observations reveal that rhombohedral CaOx monohydrate (COM) can nucleate via a classical pathway, while square COM can nucleate via a non-classical multiphase pathway. Citrate, a kidney stone inhibitor, increases the solubility of calcium by forming calcium-citrate complexes and blocks oxalate ions from approaching calcium. The presence of multiple hydrated ionic species draws additional water molecules into nucleating CaOx dihydrate crystals. These findings reveal that by controlling the nucleation pathways one can determine the macroscale crystal structure, hydration state, and morphology of CaOx.     

Effects of hydrocarbon impurities,vibrational relaxation,and boundary-layer-induced pressure rise on the ignition of H2–O2‒Ar mixtures behind reflected shock waves

The results of an experimental and theoretical study of the ignition of H₂–O₂?Ar mixtures behind reflected shock waves are reported. The experiments are performed with mixtures containing from 0.15 to 8.0% H₂ and from 0.75 to 2.0% O₂ at temperatures of 980–1800 K and a total gas concentration of (1.0 ± 0.1) × 10^?5 mol/cm³. The progress of the process is monitored by recording the time evolution of the pressure behind the reflected shock wave and the intensity of the chemiluminescence of electronically excited OH1 radicals (λ = 308 ± 2.5 nm). A numerical model capable of predicting the effects of additional factors, such as hydrocarbon impurities, the vibrational relaxation of the test mixture, and boundary-layer-induced pressure rise, is developed and used to simulate our own and published experimental data on the ignition of H₂–O₂?Ar mixtures. It is demonstrated that the best agreement between experimental and theoretical results is achieved when all the additional factors are taken into account. A sensitivity analysis shows that the effects of the vibrational relaxation of the test mixture and the presence of hydrocarbon impurities are significant only for lean mixtures, whereas the influence of the boundary-layer-induced pressure rise is important across a wide range of stoichiometries at long ignition delay times. Additionally, an analytical model is developed, which takes into account the finite time of the chain?propagation reactions O + H₂ and OH + H₂. The predictions of the numerical and analytical models are demonstrated to be in close agreement for a wide range of mixture compositions and experimental conditions.     

Concentration of biologically active polyamines in rabbit meat, liver and kidney after slaughter and their changes during meat storage and cooking

The concentration of putrescine (PUT), spermidine (SPD) and spermine (SPM) was determined in chilled meat and kidneys of 18 rabbits and in liver of 12 animals 24 h after slaughter. Very low PUT concentrations were detected only in kidneys. Mean SPD levels were 2.2, 2.2, 61.7 and 32.7 mg kg^− 1 in saddle, leg, liver and kidneys, respectively. The respective SPM concentrations were 14.7, 8.0, 115 and 88.4 mg kg^− 1. SPD and SPM losses of about one third of the initial levels were apparent in saddles stored at − 18 °C for 8 months. Losses of both polyamines of about 15-20% of the initial concentrations were found in saddles stored aerobically at + 2 °C for up to 9 days. Stewing of saddles caused significant SPD and SPM losses of about 20-25%, while upon roasting and pan-roasting without oil a decrease of about 50% of the initial concentration was observed.     

3GPP LTE‐Assisted Wi‐Fi‐Direct: Trial Implementation of Live D2D Technology

This paper is a first‐hand summary on our comprehensive live trial of cellular‐assisted device‐to‐device (D2D) communications currently being ratified by the standards community for next‐generation mobile broadband networks. In our test implementation, we employ a full‐featured 3GPP LTE network deployment and augment it with all necessary support to provide real‐time D2D connectivity over emerging Wi‐Fi‐Direct (WFD) technology. As a result, our LTE‐assisted WFD D2D system enjoys the required flexibility while meeting the existing standards in every feasible detail. Further, this paper provides an account on the extensive measurement campaign conducted with our implementation. The resulting real‐world measurements from this campaign quantify the numerical effects of D2D functionality on the resultant system performance. Consequently, they shed light on the general applicability of LTE‐assisted WFD solutions and associated operational ranges.     

Controllable Generation of a Submillimeter Single Bubble in Molten Metal Using a Low-Pressure Macrosized Cavity

Metallurgical and Materials Transactions B - We develop a method for generation of a single gas bubble in a pool of molten metal. The method can be useful for applications and research studies...     

Printing highly efficient organic solar cells

The technological attraction in organic solar cells is their compatibility to printing processes. However, up to today, nearly no literature on "printed" organic solar cells have been published and the major body of the research work was done by spin coating or blading techniques. Transferring the spin-coating or doctor blading process currently used for the fabrication of bulk heterojunction solar cell to a printing process holds morphological challenges that have not been observed or reported up to today. We highlight these challenges and we show that inkjet printing of organic bulk heterojunction solar cells requires completely novel approaches and skill sets compared to the current state of the art. By adjusting the chemical properties of the poly(3-hexylthiophene) polymer donor and by using our recently developed inkjet solvent mixture, we have gained control over the nanomorphology of poly(3-hexylthiophene):fullerene blends during the printing process and report a new record power conversion efficiency of 3.5% for inkjet printed poly(3-hexylthiophene):fullerene based solar cells.