End-to-end performance models for variable bit rate voice overtandem links in packet networks

Analytical models are presented for computing the end-to-end voice call performance in a packet network that drops the less significant bits in voice packets during periods of congestion. These models provide information about the end-to-end quality likely to be experienced in future packet-switched integrated services networks. An existing single-node bit-dropping model is modified to include the situation resulting when the overall arrival process at an internal node consists of a mix of packets of different sizes due to bit dropping at previous nodes. A detailed model to capture bit-dropping effects in a tandem connection of nodes is presented. The model includes the effect of load fluctuations at each node, and also takes into account the dependencies in bit dropping experienced by a voice packet at successive nodes in a tandem connection. The model also incorporates the internodal dependence when reductions in packet service times occur at intermediate nodes due to bit dropping at previous nodes. Two approximation procedures are discussed that serve as upper and lower bounds. In particular, the upper bound is shown to be very tight for a practical range of loads, and hence serves as a good approximation with significant computational simplicity     

Protection switching for optical bursts using segmentation and deflection routing

Burst segmentation in OBS networks can significantly reduce the amount of data that is lost due to contention events by dropping or deflecting only the portion of a burst that overlaps another contending burst. In this letter, we demonstrate how segmentation combined with deflection routing can be used to reduce the amount of data that is lost when network elements fail. By enabling an OBS switch to deflect the tail-end segments of bursts that are in transmission as soon as it becomes aware of a downstream link failure, the retransmission of lost data can be reduced.     

Traffic smoothing effects of bit dropping in a packet voicemultiplexer

The performance of a packet voice multiplexer queue in which the less significant bits of voiced packets are dropped during states of congestion in the multiplexer is examined. Using the results of simulation and analytical modeling, it is illustrated that bit dropping of voice packets significantly smooth the burstiness of superposition packet voice traffic by speeding up the packet service rate during critical periods of congestion in the queue. The smoothing effect renders it possible to approximate the superposition by a Poisson process for modeling a packet voice multiplexer with bit dropping. By comparison with a simulation, an analytical model based on the Poisson assumption is shown to produce quite accurate performance predictions. The results indicate that significant capacity and performance advantages are gained in the multiplexer as a result of the bit-dropping scheme     

Characterizing Superposition Arrival Processes in Packet Multiplexers for Voice and Data

This paper analyzes a model of a multiplexer for packetized voice and data. A major part of the analysis is devoted to characterizing the aggregate packet arrival process resulting from the superposition of separate voice streams. This is done via the index of dispersion for intervals (IDI), which describes the cumulative covariance among successive interarrival times. The IDI seems very promising as a measurement tool to characterize complex arrival processes. This paper also describes the delays experienced by voice and data packets in the multiplexer using relatively simple two-parameter approximations.     

Drug release rate method for a liposome preparation

An in vitro method was developed to determine the rate of drug release from a liposome formulation. Liposome formulation containing metaproterenol sulfate was evaluated for release of the drug over a 24-hour period in an end-over-end tumbler device. Drug release appeared to be a function of all the operating parameters, such as rotational speed of the end-over-end tumbler, temperature of suspension, and the geometry of sample container that is placed in the end-over-end tumbler device.     

Crystallization of Zircon in Stoneware Glazes

High levels of zircon are required to impart opacity in glazes. Zircon additions of <3 wt% dissolve into the glassy phase; additions of >12% cause all the zircon to crystallize from the glaze. Dynamic high-temperature X-ray diffraction has shown that, during heating, a portion of the zircon dissolves and subsequently recrystallizes, using undissolved zircon crystals as seeds. This recrystallization does not occur at lesser zircon levels, because of a lack of seed crystals. When zirconia is added to the glaze, zircon is formed as elongated crystals at the glaze surface. Lesser zircon levels have been observed in the glazes that have zirconia additions.     

Special Issue on Computer Aided Engineering in Honor of Professor Steven J. Fenves

Engineering with Computers -     

Reduction of common-source inductance in FET/HEMT structuresutilizing wave-propagation effects

In this paper, a novel high-frequency/high-power field-effect-transistor structure is presented to reduce gain degradation caused by common-source inductance. In this structure, the reduction in common-source inductance is achieved without the need for using very thin substrates or very complicated fabrication technology, such as vias under each source finger. Using detailed transmission-line modeling, it is shown that a significant reduction in common-source inductance and improvement in RF performance can be achieved even for moderately high values of source grounding via inductance. The new structure allows simpler fabrication technology and is expected to be particularly useful to reduce the cost and improve the performance of high-power microwave and millimeter-wave devices and circuits     

Design and analysis of reflectivity for Mylar-coated solar dish

Energy is the key driver of the economy but energy crisis is a problem for the present-day source of energy. The concentrated solar power systems make use of different reflector configurations to convert the solar energy into high-temperature heat energy. Parabolic dish system is considered as the best suitable system for achieving high temperature and so it is opted for the study. Here, a solar dish is designed with an open diameter of 1.8?m (which is 2.5?m² in area), and reflective film is being used to reflect the solar irradiance and concentrated it in the focal point. A receiver of 1?mm thickness and 10?cm diameter is used at the receiver end to measure the temperature of the focal point. The setup has made to attain a maximum temperature of 940°C and average temperature of 850°C in the focal point at clear sky in a sunny day.     

Numerical and experimental study of a shell and tube heat exchanger for different baffles

In the present work, the shell and tube heat exchanger (STHX) is designed based on The Tubular Exchanger Manufacturers Association standards with hot fluid (water) flowing on the shell side and cold fluid on the tube side. A comparison is made between the Nusselt number and friction factor obtained from numerical and experimental results of segmental baffles (SBs) and helical baffles (HB) with different baffle inclinations. The results show that SB provided a higher Colburn factor (j_s) when compared with HBs STHXs (20°, 30°, 40°, and 50°), but shell side pressure drop is lower for 40° HBs STHXs for the same shell side fluid flow rates.