Buckling behaviour of imperfect spherical shells subjected to different load conditions

The paper deals with an analysis of the bifurcation and initial post-buckling behaviour of highly imperfection-sensitive large spherical .shells, such as cargo tanks for ship transportation of liquefied natural gas and large spherical containment shells for nuclear power plants. The numerical analysis procedure has sufficient generality to treat shells of revolution with arbitrary curved generators and with arbitrary variation of the thickness. The shells can be subjected to non-axisymmetric time-varying loadings. The purpose of the paper is to present simple procedures for scantling selections in the initial design phase and to propose an analysis procedure for verification of the final design of optimized thin-walled spherical shells.     

Experimental evaluation of radiator control based on primary supply temperature for district heating substations

In this paper, we evaluate whether the primary supply temperature in district heating networks can be used to control radiator systems in buildings connected to district heating; with the purpose of increasing the ΔT. The primary supply temperature in district heating systems can mostly be described as a function of outdoor temperature; similarly, the radiator supply temperature in houses, offices and industries can also be described as a function of outdoor temperature. To calibrate the radiator control system to produce an ideally optimal radiator supply temperature that produces a maximized ΔT across the substation, the relationship between the primary supply temperature and outdoor temperature must be known. However, even if the relation is known there is always a deviation between the expected primary supply temperature and the actual temperature of the received distribution media. This deviation makes the radiator control system incapable of controlling the radiator supply temperature to a point that would generate a maximized ΔT.     

Effect of crude oil ageing on low salinity and low salinity surfactant flooding

Injection of brine with lower salinity than the connate brine has proven to give a moderate increase in oil recovery in sandstones. Recent research has shown that this process will significantly benefit from introducing surfactant optimised for low salinity environment.The mechanisms underlying increased recovery by low salinity brine injection are not yet fully understood. However, research to date suggests that they are related to complex crude oil/brine/rock interactions. With this in mind, the present paper investigates primarily how the extent of oil recovery from Berea sandstones subjected to long term exposure of crude oil is influenced by (1) low salinity water injection and (2) combined process low salinity water injection with surfactant flooding.Core displacement tests were conducted on four Berea cores (30 cm), two in a natural state and two that had been subject to extensive crude oil ageing at high temperature. Results obtained from different flooding steps are discussed in terms of oil recovery and effluent properties including turbidity, pH- and ion analysis (Na⁺, Mg²⁺, Ca²⁺). The results effectively illustrate that oil recoveries from the aged cores are higher during both low salinity water injection and low salinity water injection combined with surfactant flooding. An assessment of how tertiary oil recovery in aged and unaged cores varies with surfactant concentration is also presented.Effluent ion analysis from low salinity water floods showed that Mg²⁺ ions were strongly retained in the aged core while Ca²⁺ ions were being produced from both aged and unaged cores. The latter was attributed mainly to calcite dissolution. Results obtained from pressure profiles, effluent ion analysis and turbidity tests suggest higher production and elution of fine particles from the unaged core.     

Real-time PCR quantification of the AM-toxin gene and HPLC qualification of toxigenic metabolites from Alternaria species from apples

Some Alternaria species are able to produce plant pathogenic as well as toxic metabolites. In both agriculture and the food industry it is important know if toxigenic Alternaria are present to rapidly employ the correct corrective actions. The purpose of this work was to establish a real-time PCR method, which can detect and quantify apple pathogenic and toxigenic Alternaria. An AM-toxin I primer set, which could recognize Alternaria DNA only, was designed by using primers complementary to the AM-toxin I gene. The method could detect small amounts of DNA (4 pg) and still obtain a large dynamic range (4 decades) without interference from apple material. Eight Alternaria isolates were analyzed for the presence of AM-toxin I gene and their production of secondary metabolites. Then analyses showed that all eight isolates contained the AM toxin gene and were able to produce the plant pathogenic tentoxin in addition to AM toxin I. The analyses also showed the production of tenuazonic acid, alternariols, Altenuene, altenusin and/or altertoxin I in pure culture. Analyses of inoculated apples showed that both the AM-toxin gene and alternariol monomethyl ether could be detected. Morphological analyses suggested that the eight Alternaria strains, though they all carried the AM toxin genes, probably belong to different but closely related un-described Alternaria taxa in the A. tenuissima species-group based on morphological and chemical differences.     

Kinetics of oxytetracycline reaction with a hydrous manganese oxide

Tetracycline antibiotics comprise a class of broad spectrum antimicrobial agents finding application in human therapy, animal husbandry, aquaculture, and fruit crop production. To better understand the processes affecting these antibiotics in soils and sediments, the kinetics of oxytetracycline transformation by a hydrous manganese oxide (MnO2) were investigated as a function of reactant concentration, pH, and temperature. Oxytetracycline was rapidly degraded by MnO2. Initial reaction rates exhibited pronounced pH-dependence, increasing as pH decreased. Reaction of oxytetracycline with MnO2 was accompanied by generation of Mn(II) ions, suggesting oxidative transformation of the antibiotic. At pH 5.6, apparent reaction orders for oxytetracycline and MnO2 were 0.7 and 0.8. Reaction order with respect to H+ was 0.6 between pH 4 and 9. Initial reaction rates increased by a factor of approximately 2.4 for 10 degrees C temperature increases; the apparent activation energy (60 kJ x mol(-1)) was consistent with a surface-controlled reaction. Reactivity of tetracycline antibiotics toward MnO2 increased in the following order: rolitetracyline oxytetracycline < or =tetracycline approximately meclocycline < chlortetracycline. The initial rate of chlortetracycline degradation by MnO2 was substantially larger than that of the other tetracycline antibiotics investigated. MnO2 reactivity toward oxytetracycline decreased with time; a retarded rate equation was used to describe oxytetracycline reaction with MnO2 under declining rate conditions. This study indicates that natural manganese oxides in soils and sediments are likely to promote appreciable degradation of tetracycline antibiotics, and that reaction rates are strongly dependent on reaction time scale and solution conditions.     

Dry-pasteurization of egg albumen powder in a fluidized bed. II. Effect on functional properties: gelation and foaming

Dry‐pasteurization of egg albumen (EA) powder in a fluidized bed was studied in two experiments. Experiment 1 consisted of two different temperatures (90 and 130 °C) and experiment 2 of two air moisture levels (high and low). Powders were processed from 10 min to 3 h. The reference treatment was traditional pasteurization at 90 °C for 21 h. The fluidized bed treatment effects on gel texture, water‐holding capacity (WHC), protein binding, gel colour, foaming capacity, foam stability and surface pressure were evaluated. Gels of EA powders treated at high temperature and high air moisture levels exhibited higher stress, strain and WHC values than gels of untreated EA powder. The gel colour became significantly darker, greener and less yellow by fluidized bed treatment. Foaming and surface activity properties were un‐affected by the treatments, however, foam stability against liquid drainage correlated positively with surface pressure.     

Detection of five novel GMO maize events by qualitative, multiplex PCR and fluorescence capillary gel electrophoresis

Acid-soluble collagen (ASC) and pepsin-soluble collagen (PSC) from the skin of blacktip shark (Carcharhinus limbatus) were isolated and characterized. The yield of ASC (20.01%) was much higher than that of PSC isolated from the residue of ASC extraction (0.86%). Both collagens had protein as their major constituent with the trace amounts of ash and fat. Based on protein patterns and TOYOPEARL^® CM-650M column chromatography, both collagens contained α- and β-chains as their main components and were characterized as type I collagen with the cross-link of α2-chain. Similar peptide maps of both collagens, digested by either V8 protease or lysyl endopeptidase, were observed but they were totally different from those of type I collagen from calf skin hydrolyzed by the same enzyme. Thermal transition temperature (T _max) of ASC and PSC were 34.23 and 34.37 °C, respectively. Fourier-transform infrared spectra suggested that both collagens were in triple-helical structure. From zeta potential analysis, isoelectric points (pI) of ASC and PSC were estimated to be 6.78 and 7.02, respectively. Thus, blacktip shark skin may serve as an alternative source of collagen and acid solubilization process could be implemented with ease and high yield.     

Influence of bovine antiserum (Bo-Bac 2X) injection on colostral immunoglobulin G absorption in neonatal dairy calves

On the background of positive survival data from farms in Mississippi, treating calves with antiserum injection in addition to normal colostrum administration, the objective of the present study was to evaluate the influence of a single subcutaneously administered bovine antiserum injection (0.031 g of IgG/kg of body weight) and pooled colostrum administration on efficiency of Ig absorption and on 24-h plasma IgG concentration in neonatal bull calves. Twenty-nine male dairy calves (21 Holsteins and 8 Jerseys) were assigned randomly at parturition to receive one of four treatments: 1) colostrum (n = 9), 2) colostrum and bovine antiserum injection (n = 7), 3) milk replacer (n = 5), or 4) milk replacer and bovine antiserum injection (n = 8). At birth, calves either did or did not receive an injection of bovine antiserum and were fed pooled colostrum or milk replacer (Holsteins, 3.8 L; Jerseys, 1.9 L) via an esophageal feeder. Blood was collected immediately before administration of the colostrum or milk replacer, then again at 24 and 48 h postpartum. Immunoglobulin G concentrations of colostrum, milk replacer, antiserum, and plasma were monitored by single radial immunodiffusion. Colostrum administration and injection of bovine antiserum each increased plasma Ig concentration at 24 h posttreatment. In addition, antiserum injection increased the apparent efficiency of absorption of colostral Ig by 42% over that for calves fed colostrum alone. The increase in plasma IgG for antiserum-treated calves exceeded the total amount of IgG administered in the antiserum injection; hence, this increase appeared to be the result of an increase in total absorption of colostral IgG, or possibly antiserum injection somehow triggered active synthesis of IgG. Injection of antiserum might possibly serve as a beneficial adjunct to a colostrum management program by enhancing the acquisition of passive immunity from colostral sources.     

Life cycle cost analysis of a car,a city bus and an intercity bus powertrain for year 2005 and 2020

The international economy, in the beginning of the 20th century, is characterized by uncertainty about the supply and the price of oil. Together with the fast decrease of electrical propulsion component prices, it becomes more and more cost effective to develop vehicles with alternative powertrains. This paper focuses on two questions: Are alternative powertrains especially cost effective for specific applications?; How does an increased fossil fuel price influences the choose of powertrain? To assess these questions, a computer tool named THEPS, developed in a Ph.D. project, is used. Three applications and three scenarios are analysed. The applications, a car, a city bus and an intercity bus, are vehicles all assumed to operate in Sweden. One scenario represents year 2005, the other two year 2020. The two future scenarios are characterized by different fossil fuel prices. The study, presented in the paper, indicates that alternative powertrains can be competitive from a cost perspective, in some applications, already in year 2005. It is for example cost effective to equip a city bus, running in countries with a high fuel price, with a hybrid powertrain. The study also indicates that pure electric, hybrid and/or fuel cell cars will probably be a more cost effective choice than conventional cars in year 2020. Another indication is that it will not be clear which powertrain concept to choose. The reason is that many cost effective powertrain concepts will be offered. The best choice will depend on the application.     

无线技术拓展过程控制的视野

使用新型的无线技术，能够方便快捷地采集和传递以往难以访问的现场数据，这无疑为现代过程控制领域打开了一个视野更为开阔的窗口。