Studies of teratogenic effects of the dithiocarbamates maneb, mancozeb, and propineb

Oral administration of high dosages of the dithiocarbamate pesticides maneb and mancozeb was teratogenic in rats but not in mice. The malformations, severe limb and craniofacial defects, were pronounced after maneb treatment but less so after mancozeb and propineb, zinc-containing compounds. The teratogenic effect of maneb was progressively reduced by simultaneously administering increasing amounts of zinc acetate. The mechanism of the teratogenic effect may involve the compounds being chelating agents, trapping zinc required for many important enzyme systems.     

Synthesis of branched 'nanotrees' by controlled seeding of multiple branching events

The formation of nanostructures with controlled size and morphology has been the focus of intensive research in recent years. Such nanostructures are important in the development of nanoscale devices and in the exploitation of the properties of nanomaterials. Here we show how tree-like nanostructures ('nanotrees') can be formed in a highly controlled way. The process involves the self-assembled growth of semiconductor nanowires via the vapour-liquid-solid growth mode. This bottom-up method uses initial seeding by catalytic nanoparticles to form the trunk, followed by the sequential seeding of branching structures. Each level of branching is controlled in terms of branch length, diameter and number, as well as chemical composition. We show, by high-resolution transmission electron microscopy, that the branching mechanism gives continuous crystalline (monolithic) structures throughout the extended and complex tree-like structures. The controlled seeding method that we report here has potential as a generic means of forming complex branching structures, and may also offer opportunities for applications, such as the mimicking of photosynthesis in nanotrees.     

Atmospheric transport of polybrominated diphenyl ethers and polychlorinated biphenyls to the Baltic Sea

The atmospheric transport of polybrominated diphenyl ethers (PBDEs) and polychlorinated biphenyls (PCBs) was compared by measuring concentrations in air and deposition on an island located in the central basin of the Baltic Sea. Median sigmaPBDE and sigmaPCB concentrations (gaseous + particle) were 8.6 and 7.4 pg m(-3), respectively. Airborne PCBs were mainly found in the gaseous phase, while most of the PBDEs were detected on particles, which agrees with predicted particle/gas distributions. SigmaPBDE levels were dominated by the decabrominated BDE209 followed bythe tetrabrominated BDE47 and pentabrominated BDE99. BDE209 is a marker for the environmental distribution of the commercial deca-BDE formulation (>99.5% BDE209), whereas BDE47 and BDE99 are markers for the commercial penta-BDE mixture. General correlations between PBDEs and PCBs suggested similarities in sources and transport mechanism, while more detailed examination of the data identified notable behaviors and exceptions. Differences in regression slopes among tetra-, penta-, and decabrominated PBDEs may reflect different transport processes and the change in usage pattern. Tetra- and pentabrominated PBDEs may originate from secondary sources such as air surface exchange in a manner similar to that of the PCBs, while the deca-BDE209 formulation still has primary sources. The tribrominated BDE17 was also detected and is proposed to be a breakdown product due to atmospheric debromination processes. PBDEs had higher washout ratios than PCBs, explaining their higher concentrations compared to PCBs in precipitation (median of 6.0 and 0.5 ng L(-1) for sigmaBDE and sigmaPCB concentrations ("dissolved" + particle), respectively) than in air. The calculated yearly deposition of PBDEs and PCBs indicated that the atmospheric input of PBDEs to the Baltic Proper is currently exceeding that of the PCBs by a factor of 40, while that of the PCBs is decreasing.     

Ligand distributions in agarose particles as determined by confocal Raman spectroscopy and confocal scanning laser microscopy

Confocal Raman spectroscopy and confocal scanning laser microscopy have been used to analyze ligand distributions within individual chromatographic adsorbent particles. Three different types of particles have been investigated. The first type was synthesized to have a uniform distribution of allyl groups, whereas the two others were designed to have a surface layer of sulphopropyl groups and cores containing allyl groups and dextran, respectively. With confocal Raman spectroscopy it was possible to follow the distribution of both the surface layer and the interior. The distribution of sulphopropyl groups was evaluated with both confocal scanning laser microscopy and confocal Raman spectroscopy, whereas the distributions of allyl groups and dextran were evaluated only with the latter method. The results from the confocal measurements showed the expected result with a uniform distribution of allyl groups in the first type of particle and surface layers of sulphopropyl groups and cores with dextran or allyl groups for the two others.     

Efficiency of methods for Karl Fischer determination of water in oils based on oven evaporation and azeotropic distillation

The efficiency of azeotropic distillation and oven evaporation techniques for trace determination of water in oils has recently been questioned by the National Institute of Standards and Technology (NIST), on the basis of measurements of the residual water found after the extraction step. The results were obtained by volumetric Karl Fischer (KF) titration in a medium containing a large excess of chloroform (> or = 65%), a proposed prerequisite to ensure complete release of water from the oil matrix. In this work, the extent of this residual water was studied by means of a direct zero-current potentiometric technique using a KF medium containing more than 80% chloroform, which is well above the concentration recommended by NIST. A procedure is described that makes it possible to correct the results for dilution errors as well as for chemical interference effects caused by the oil matrix. The corrected values were found to be in the range of 0.6-1.5 ppm, which should be compared with the 12-34 ppm (uncorrected values) reported by NIST for the same oils. From this, it is concluded that the volumetric KF method used by NIST gives results that are much too high.     

Parameter estimation of continuous-time bilinear systems based on numerical integration and separable non-linear least-squares

This paper considers the problem of estimating the parameters in continuous-time bilinear systems. The system identification approach is based on numerical integration and separable non-linear least-squares. The situation where the output signal is contaminated with noise is also discussed. The suggested estimation method uses a bias compensating approach and the model parameters together with parameters associated with the noise are estimated by solving an overdetermined system of equation in a least-squares sense.     

Microstructural characterization and in vitro bioactivity of porous glass-ceramic scaffolds for bone regeneration by synchrotron radiation X-ray microtomography

One of the key purposes of bone tissue engineering is the development of new biomaterials that can stimulate the body's own regenerative mechanism for patient's anatomical and functional recovery. Bioactive glasses, due to their versatile properties, are excellent candidates to fabricate porous 3-D architectures for bone replacement. In this work, morphological and structural investigations are carried out on Bioglass^®- and CEL2-derived scaffolds produced by sponge replication (CEL2 is an experimental glass developed at Politecnico di Torino). Synchrotron radiation X-ray microtomography is used to study the samples 3-D architecture, pores size, shape, distribution and interconnectivity, as well as the growth kinetics on scaffolds struts of a newly formed apatitic phase during in vitro treatment in simulated body fluid, in order to describe from a quantitative viewpoint the bioactive potential of the analyzed biomaterials. An accurate comparison between architectural features and bioactive behaviour of Bioglass^®- and CEL2-derived scaffolds is presented and discussed.     

Bartlett Corrections for Unit Root Test Statistics

Bartlett corrections of the log likelihood ratio test for a unit root in an AR(1) process, as well as for some asymptotically equivalent tests, are studied. The corrections are obtained by an analytical method. The numerical performance of the results is checked in a simulation study.