Physicochemical characteristics of proteins extracted from muscles excised from four distinct regions of mackerel were examined. Three regions were identified based on their fin position; namely anterior muscle, median muscle, posterior muscle and red muscles from beneath the lateral line. The biochemical characteristics like reactive sulphydryl groups, surface hydrophobicity, Ca2+ ATPase activity, turbidity, proximate composition and the functional characteristics such as viscosity, emulsion activity index (EAI) and emulsion stability (ES) were studied in the samples, from different regions. Sarcoplasmic protein (SPP) solubility was found to be higher in red muscles compared to that of white muscles, whereas myofibrillar protein (MFP) solubility was higher in white muscles particularly in the posterior portion. The MFP from posterior white muscles showed better viscosity, surface hydrophobicity and Ca2+ ATPase activity, which in turn contributed to the higher EAI and ES of this muscle portion. Variations in composition, electrophoretic pattern of proteins and selected functional properties (EAI) were noticed between red and white muscles, which may be of significance from the utilization point of the fish. 相似文献
To study the effect of irradiation on materials, sample coupons are irradiated in cyclotron facilities. During the irradiation process, these samples produce significant heat. This heat needs to be continuously removed from the samples in order to avoid melting of the samples as well as to keep the samples at a particular temperature during irradiation. The area available for heat transfer is limited due to small size of the samples. To increase the heat transfer rate, jet cooling is used as it provides large heat transfer co-efficient. To understand the heat transfer characteristics of jet cooling under these conditions, experiments have been carried out. Two inclined jets hitting on both sides of the target plate give maximum cooling and uniform temperature distribution. This paper gives the details of the numerical and experimental studies carried out and the discussions about the results obtained. 相似文献
Journal of Materials Science: Materials in Electronics - Nonlinear optical organometallic single crystal of manganese mercury thiocyanate (MMTC) has been grown by SR method in aqueous solution. The... 相似文献
Dietary fibre (DF)-anthocyanin formulation was incorporated in bread to develop anthocyanin rich DF powder (ARDFP) fortified bread. Prior to incorporation of DF-anthocyanin formulation in bread preparation, the cytotoxicity of DF and anthocyanin extracts was assessed. The effect of incorporation of different level of ARDFP with moisture on bread quality characteristics such as specific volume, textural, colour, sensory properties and starch digestibility was studied. The results revealed that extracted DF and anthocyanin of culinary banana bracts were nontoxic towards peripheral blood mononuclear cell and cytotoxic towards HT29 cancerous cell line. Incorporation of 2% ARDFP with 68% moisture was rated as best with higher specific volume (5.50 cm3 g−1), improved textural properties (high springiness and cohesiveness), anthocyanin content (9.08 mg per 100 g), colour characteristics and sensory acceptability next to control. The in vitro digestibility study suggested increased incorporation of ARDFP in bread flour reduced the rate of starch digestibility (0.0035 min−1). 相似文献
In this paper, a novel compact semi-circular slot (SCS) 2 × 2 MIMO antenna is presented for 5G NR sub-6 GHz applications with high isolation. The proposed antenna consists of a semi-circular slot in ground plane, U-shaped stub, and 50-ohm microstrip feed line. The novelty of this paper are the Semi-Circular Slot acts a radiator, the port isolation is enhanced using a simple conductor strip as a neutralization line, very compact in size, low ECC, and good impedance matching. The overall size of the proposed SCS MIMO antenna is 16 mm x 21 mm, and FR4 substrate is used with thickness of 1.6 mm. The two SCS antenna elements are separated by edge-to-edge distance of 1mm (\(=0.019\lambda _{0}\)). The proposed compact MIMO antenna design is simulated using Ansys HFSS. To validate SCS MIMO antenna, a prototype was fabricated and tested. The measured results are attained at 5.5 GHz with isolation greater than 25dB, impedance bandwidth (S11\(<-10\) dB) covers from 5.10 GHz to 5.80 GHz with return loss of ? 39.5 dB. The MIMO antenna parameters, ECC, CCL, TARC, and MEG are studied, and the values are obtained within acceptable limits. The measured and simulated antenna results are almost similar. This compact MIMO antenna is suitable for 5G communications in sub-6 GHz wifi-5 band applications.
Destabilisation of as-cast chromium white iron with 16 wt-% chromium are performed by continuous destabilisation treatment for 4 h and short duration (0.66 h) cyclic destabilisation treatment at 900, 950, 1000, 1050, and 1100 °C. Continuous destabilisation causes secondary carbides precipitation from austenite which on slow cooling transforms to pearlite matrix. Cyclic destabilisation treatment causes similar precipitation of finer secondary carbides following shorter period austenitisation and a matrix containing martensite and retained austenite on forced-air cooling. After continuous destabilisation, hardness falls below the as-cast value (HV622); whereas it rises to HV950 after cyclic destabilisation treatment. The as-cast notched impact toughness (4.0 J) increases to 8.5 J or more after both continuous and cyclic destabilisation at 1050 and 1100 °C. Abrasive wear resistance after continuous destabilisation improves only at higher wear load (49.0 N), while after cyclic destabilisation it supersedes the as-cast and Ni-Hard IV performance at both low (19.6 N) and high (49.9 N) wear load. 相似文献
In this work, lanthanum phosphate with a 20% yttria (LaPO4/Y2O3) composite prepared by an Aqueous Sol–Gel process is machined using an Abrasive Water Jet Machine (AWJM). The machinability of this composite is studied by varying the input parameters namely Jet Pressure (JP), Stand-Off Distance (SOD), and Traverse Speed (TS) on Surface finish. Garnet of 80 mesh size is used as an abrasive with a flow rate of 85?g/min. The microstructural characterization study reveals the presence of new element YPO4. This element enhances the machinability and reduced porosity in the composite. Microscopy examinations on the machined surface reveals that partial overlapping at low JP, poor surface finish at high JP and SOD, forged deficiency at maximum SOD and TS. The minimum levels of all input parameters are influenced to obtain acceptable Ra. Atomic Force Microscopy (AFM) on the kerf surface shows micro wear track and peaks. The Multiple Regression Analysis (MRA) is developed for Ra to check the adequacy. From the Analysis of Variance (ANOVA), SOD has a significant effect on Ra with a contribution of 53%. The influence of JP and TS on Ra is found to be 31% and 15%, respectively. 相似文献
Calcium phosphate cements (CPCs) are ideally suited for the local delivery of antibiotics in infected bone defects as they have multiple binding sites for loading various drugs. CPCs can also be substituted with ions such as Ag+, Zn2+, Mg2+, Sr2+, etc., to exhibit extended broad-spectrum antimicrobial activity. Strontium (Sr) in particular is known to enhance the new bone formation and decrease bone resorption. The current work aims to develop a dual action tetracalcium phosphate (TTCP) based cement which releases both the Sr2+ ion and ornidazole antibiotic drug for the treatment of bone infections. The TTCP with Sr2+ ion substitution was prepared by the solid state reaction method and it was used to form ornidazole loaded CPC. The ornidazole loaded cement prepared using 8?at% Sr substituted TTCP (8SCPC-O) showed complete hydroxyapatite (HA) formation in phosphate buffered solution at the end of 1 week. Fine needle-shaped HA crystals were observed in 8SCPC-O cement. In vitro drug release studies showed an accelerated ornidazole release from the 8SCPC-O sample when compared to samples without Sr substitution. Ornidazole releasing cements were found to be biocompatible with skeletal myoblast (L6) cells. Antibacterial activity of ornidazole releasing cement was evident from day 1 onwards against E. coli. The above results suggest 8SCPC-O as a good candidate for treating local bone infections. 相似文献
Electrospinning (ES) is a most reliable method for synthesizing one dimensional (1D) fibrous material. Fibrous materials are having peculiar interest owing to their fascinating properties. For efficient hydrogen fuel generation, electrocatalytic water splitting is one of the finest way of producing hydrogen in a pure form. But it is encountered by the counter oxygen evolution reaction (OER) in more often. As of now, noble metal based catalysts are utilized in the commercial sector. Some of the disadvantages associated with the noble materials are restrict their usage commercially. To address this issue, herein, we have synthesized One dimensional (1D), hydrated porous cobalt phosphate fibrous network by an ES method and act as an electrocatalyst for OER in both alkaline and neutral media for the first time, which exhibits an overpotential of 245 and 457 mV respectively at a current density of 10 mAcm?2 with astonishing stability. 相似文献