Mixed Lead Halide Passivation of Quantum Dots

Infrared‐absorbing colloidal quantum dots (IR CQDs) are materials of interest in tandem solar cells to augment perovskite and cSi photovoltaics (PV). Today's best IR CQD solar cells rely on the use of passivation strategies based on lead iodide; however, these fail to passivate the entire surface of IR CQDs. Lead chloride passivated CQDs show improved passivation, but worse charge transport. Lead bromide passivated CQDs have higher charge mobilities, but worse passivation. Here a mixed lead‐halide (MPbX) ligand exchange is introduced that enables thorough surface passivation without compromising transport. MPbX–PbS CQDs exhibit properties that exceed the best features of single lead‐halide PbS CQDs: they show improved passivation (43 ± 5 meV vs 44 ± 4 meV in Stokes shift) together with higher charge transport (4 × 10^‐2 ± 3 × 10^‐3 cm² V^‐1 s^‐1 vs 3 × 10^‐2 ± 3 × 10^‐3 cm² V^‐1 s^‐1 in mobility). This translates into PV devices having a record IR open‐circuit voltage (IR V_oc) of 0.46 ± 0.01 V while simultaneously having an external quantum efficiency of 81 ± 1%. They provide a 1.7× improvement in the power conversion efficiency of IR photons (>1.1 µm) relative to the single lead‐halide controls reported herein.     

Synthesis of biodegradable hydroxyethylcellulose cryogels by UV irradiation

Biodegradable macroporous hydroxyethylcellulose (HEC) cryogels of good quality and high gel fraction yield (95%) were synthesized via a facile method. The latter involved a relatively fast preparation of homogeneous semidilute solution of polymer and photoinitiator, (4-benzoylbenzyl)trimethylammonium chloride, followed by freezing at a defined negative temperature, an extremely short UV irradiation and subsequent thawing. HEC cryogels were successfully prepared also by using H₂O₂ as a photoinitiator. The effects of the temperature of freezing, the HEC molecular weight and the concentration of HEC solution on the cross-linking efficiency, the swelling ratio and the enzymatic degradation of HEC cryogels were investigated. Due to the cryoconcentration phenomenon, cryogels are formed at substantially low initial concentrations of the studied polymers. The highest values of gel fraction yield are achieved in the 1-2 wt.% concentration range at −20 °C. As a rule, the higher the molecular weight, the greater the gel fraction yield of the resulting cryogels. Scanning electron microscopy (SEM) analysis reveals that the interior structure of HEC cryogels is completely different from the conventional HEC hydrogels. HEC cryogels undergo decomposition by the action of cellulase enzyme, however, due to their specific morphology, the rate of degradation is slower compared to the conventional HEC hydrogel of similar gel fraction yield.     

Are conductance plateaus independent events in atomic point contact measurements? A statistical approach

Conductance-elongation curves of gold atomic wires are measured using a scanning tunneling microscope break junction technique at room temperature. Landauer's conductance plateaus are individually identified and statistically analyzed. Both the probabilities to observe and the lengths of the two last plateaus (at conductance values close to 2e(2)/h and 4e(2)/h) are studied. All results converge to show that the occurrences of these two conductance plateaus on a conductance-elongation curve are statistically independent events.     

Transient EMF induced in LV cables due to wind turbine direct lightning strike

This paper presents a novel, easy to use, engineering method for determining the transient electromotive force (EMF) induced in low-voltage (LV) cables, connecting the wind turbine with a near-by transformer, in the event of direct lightning strike into the top of the wind turbine tower. Proposed method is based on the application of the travelling wave analysis onto the system consisted of wind turbine tower, earthing system of wind turbine, earthing system of near-by transformer station and LV cables connecting the wind turbine with associated transformer. Hence, this design gives rise to a complex, mutually connected, earthing system. Direct lightning strike to the wind turbine initiates a travelling wave process in the system consisted of lightning channel, wind turbine tower and earthing system of the wind turbine. Due to the transient nature of the observed phenomenon, current and voltage states at the earthing system as well as in the associated low-voltage cables are formed through the propagation and reflection of the accompanying travelling waves. Transient EMF induced in LV cables could endanger cable main insulation and insulation of the associated transformer LV winding. Developed theory is subsequently applied on the concrete wind turbine example.     

Toxin-producing Ostreopsis cf. ovata are likely to bloom undetected along coastal areas

Mass appearances of the toxic dinoflagellate genus Ostreopsis are known to cause dangerous respiratory symptoms in humans exposed to aerosols. The outbreaks can appear in shallow marine waters of temperate regions around the globe. We followed a massive bloom event on a public beach on the northern Adriatic coast near Rovinj, Croatia. We identified the responsible species and the produced toxins as well as the dynamics of the event with respect to environmental conditions. Ostreopsis cf. ovata appeared in masses from September through October 2010 on a public beach near Rovinj, Croatia but stayed undetected by public health organizations. Respiratory symptoms were observed whenever humans were exposed to substrate samples containing large numbers of Ostreopsis cells. During the mass abundance of O. cf. ovata also exposure to the aerosols on the beach evoked respiratory symptoms in humans. Our measurements showed high cell abundances and high toxin contents with a stable relative contribution of putative Palytoxin and Ovatoxins a-e. Artificial beach structures proved to dramatically reduce settling of the observed Ostreopsis biofilm. Blooms like those reported herein have a high potential to happen undetected with a high potential of affecting the health of coastal human populations. Increased monitoring efforts are therefore required to understand the ecology and toxicology of those bloom events and reduce their negative impact on coastal populations.     

Scapania nemorea liverwort extracts: Investigation on volatile compounds, in vitro antimicrobial activity and control of Saccharomyces cerevisiae in fruit juice

This study was focused on chemical characterisation of liverwort Scapania nemorea extracts and their antimicrobial activity against pathogenic and food-spoiling yeasts and bacteria. The chemical composition of three different extracts of the liverwort S. nemorea was determined by solid phase microextraction gas chromatography-mass spectrometry (SPME GC–MS). The dominant compounds in extracts were sesquiterpenes β-bazzanene (11%, 17.9% and 14.6%), isobazzanene (10.2%, 15.8% and 11.7%) and aromadendrene (8.8%, 12.9% and 10.6%) in the methanol, ethanol and ethyl acetate extracts, respectively. Antimicrobial potential of S. nemorea extracts against food spoiling yeasts and bacteria was determined in vitro by microdilution method. The Minimum Inhibitory Concentration (MIC) varied from 0.5 to 3 mg/mL for bacteria, and from 0.2 to 1 mg/mL for yeasts. Moreover, the combined effects of dry methanol extract of S. nemorea and heat processing on the survival and growth of a spoilage yeast in an apple/orange-based beverage, have been assessed through a Central Composite Design. Changes in color and flavor of the beverages were considered acceptable also after one week of storage at 25 °C. The results provide evidence of antimicrobial potential of S. nemorea extracts and suggest its potential as natural antimicrobial agent for food preservation.     

Effectiveness of wheat-applied contact insecticides against Sitophilus granarius (L.) originating from different populations

Toxicity parameters were determined for granary weevil Sitophilus granarius adults in the laboratory after treatment of wheat grains with several contact insecticides: dichlorvos, malathion, chlorpyrifos-methyl, pirimiphos-methyl, deltamethrin, and deltamethrin with the piperonyl butoxide (PBO) synergist. The impact was determined on three populations: an insecticide-susceptible laboratory population, a population originating from Belgrade Port (Serbia) selected once previously with pirimiphos-methyl at the LD₇₀ level, and one from Bijeljina (Bosnia and Herzegovina) selected once at the LD₇₀ level with deltamethrin.

After exposure of granary weevil adults to treated wheat for 48 h, deltamethrin with PBO was the most effective insecticide against the laboratory population (LD₅₀=0.10 mg/kg and LD₉₅=0.25 mg/kg) and dichlorvos the least effective (LD₅₀=1.80 mg/kg and LD₉₅=5.35 mg/kg). Regarding the selected weevils from Belgrade Port and Bijeljina, the most effective insecticide was chlorpyrifos-methyl (LD₅₀=0.25 and 0.22 mg/kg; LD₉₅=0.40 and 0.28 mg/kg, respectively), and the least effective was dichlorvos (LD₅₀=6.56 and 4.99 mg/kg; LD₉₅=26.78 and 16.14 mg/kg).

Insecticide minimum effective doses (MED) able to prevent an F₁ or F₂ generation were determined. Deltamethrin+PBO had the lowest (0.2 mg/kg) and malathion the highest MED (>5.0 mg/kg) in both generations of laboratory weevils. The lowest MED for the selected weevils from Belgrade Port was recorded for deltamethrin+PBO (0.5 mg/kg for the F₁ and 0.3 mg/kg for the F₂ generation) and the highest for dichlorvos (6.0 mg/kg for both generations); while the lowest MED for the selected Bijeljina weevils was achieved by chlorpyrifos-methyl (0.3 mg/kg for the F₁ and 0.2 mg/kg for the F₂ generation) and the highest by malathion and dichlorvos (5.0 mg/kg) in the F₁ generation, and malathion (3.0 mg/kg) in the F₂ generation.     

Recent developments in Process Integration

Process Integration supporting process design, integration and optimisation has been around for more than 40 years. Its development has been closely related to developing the Chemical Engineering, implementation of mathematical modelling and the application of information technology. Its development has been accelerating as the methodology has been able to provide answers and support for important issues regarding economic development—energy, water and resources better utilisation and savings. This contribution is targeted towards a short overview of recent achievements and future challenges.     

Outage analysis of selection diversity over Rayleigh fading channels with multiple co-channel interferers

In this paper an approach to the performance analysis of signal-to-interference (SIR) based selection combining (SC) operating over the Rayleigh fading channels experiencing an arbitrary number of multiple, Rayleigh co-channel interferers is presented. We have presented a general analysis of multibranch SC where each branch experiences an arbitrary number of multiple equal power co-channel interferers. Useful closed form expressions are derived for the probability density function (PDF) and cumulative distribution function (CDF) at the output of the combiner. Also an outage analysis is performed in order to show the effects of the number of multiple interferers, diversity order and input SIR unbalance to the system performances.