Short communication: Effect of commercial or depurinized milk diet on plasma advanced oxidation protein products,cardiovascular markers,and bone marrow CD34 stem cell potential in rat experimental hyperuricemia

Cardiovascular repair and myocardial contractility may be improved by migration of bone marrow stem cells (BMSC) and their delivery to the site of injury, a process known as BMSC homing. The aim of our study was to examine the dietary effect of a newly patented depurinized milk (DP) that is almost free of uric acid and purine and pyrimidine compounds compared with a standard commercial 1.5% fat UHT milk diet or allopurinol therapy in rat experimental hyperuricemia. Bone marrow stem cell potential (BMCD34⁺, CD34-postive bone marrow cells), plasma oxidative stress parameters [advanced oxidation protein products, AOPP) and thiobarbituric acid reactive substances (TBARS)], myocardial damage markers [creatine phosphokinase (CPK), aspartate aminotransferase (AST), and lactate dehydrogenase (LDH)], plasma cholesterol, and high-density lipoprotein cholesterol were investigated. The DP milk diet significantly increased the number of BMCD34⁺ stem cells compared with commercial UHT milk. Allopurinol given alone also increased the number of BMCD34⁺. Hyperuricemia caused a significant increase in all plasma enzyme markers for myocardial damage (CPK, LDH, and AST). A cardioprotective effect was achieved with allopurinol but almost equally with DP milk and more than with commercial milk. Regarding plasma AOPP, TBARS, and cholesterol levels, the most effective treatment was DP milk. In conclusion, the protective role of a milk diet on cardiovascular function may be enhanced through the new depurinized milk diet, which may improve cardiovascular system function via increased bone marrow stem cell regenerative potential, decreased plasma oxidative stress parameters, and decreased levels of myocardial damage markers and cholesterol. New dairy technology strategies focused on eliminating harmful milk compounds should be completely nontoxic. Novel milk products should be tested for their ability to improve tissue repair and function.     

Integration and management of renewables into Total Sites with variable supply and demand

Reducing CO₂ emissions could be achieved by maximising heat recovery and increasing the share of renewables in the primary energy mix. Process Integration has developed over the years into a credible process system engineering tool. One of its important developments has been Total Site Heat Integration, which has combined the heating and cooling requirements of individual processes unlocking, allowing better integration. The current paper presents an extension of the Total Site methodology covering industrial, residential, service, business and agricultural customers and the incorporation of renewable energy sources (solar, wind, biomass, and some types of waste), accounting for the often substantial variability on the supply and demand sides and for the use of non-isothermal utilities. It further applies the extension of the heat cascade principle with inclusion of heat storage and minimises the heat waste and carbon footprint of the considered sites. This is illustrated with a comprehensive case study.     

Poly(ethoxytriethyleneglycol acrylate) cryogels as novel sustained drug release systems for oral application

Novel temperature sensitive cryogels of poly(ethoxytriethyleneglycol acrylate) (PETEGA), with in situ entrapped active substance, are synthesized employing the UV irradiation technique and tested as matrix for controlled release of the hydrophilic drug verapamil hydrochloride. PETEGA cryogels are non-toxic materials and, due to the macroporous structure, exhibit a reversible, ultra-rapid volume phase transition at temperature ca. 31 °C. Carriers based on PETEGA cryogels possess sustained release of verapamil hydrochloride over a period of more than 8 h, which is attributed to the hydrophobic state of the polymer network at physiological temperature and the method of drug immobilization. Drug release characteristics of PETEGA cryogels are compared with another cryogel systems, based on polyacrylamide (PAAm), poly(N-isopropylacrylamide) (PNIPAAm) and poly(2-hydroxyethyl methacrylate) (PHEMA), obtained via the same method.     

Effect of structural and acidity/basicity changes of CuO–CeO2 catalysts on their activity for water–gas shift reaction

The objective of this work was to investigate the influence of CuO loading and catalyst pretreatment procedure to derive an optimal CuO–CeO₂ catalyst for the water–gas shift reaction (WGS), and to study in detail structure– and surface acidity–activity relationships. Catalyst samples prepared by coprecipitation and a 10, 15 and 20 mol% CuO content were examined by XRD, BET and TPR/TPD analyses and subjected to pulse WGS activity tests in the temperature range of 180–400 °C. Strong structure–activity dependence in the WGS reaction was observed for all catalyst samples. It was established that increasing CuO content has a positive effect on H₂ production during the WGS reaction, due to favored CeO₂ reduction. Increasing calcination temperature on the other hand reduces the BET surface area, induced by CuO sintering and agglomeration of CeO₂ particles, resulting in a negative effect on H₂ production. Distinctive WGS activity dependence on surface acidity was observed and investigated.     

Occurrence and fate of emerging wastewater contaminants in Western Balkan Region

This paper reports on a comprehensive reconnaissance of over seventy individual wastewater contaminants in the region of Western Balkan (WB; Bosnia and Herzegovina, Croatia and Serbia), including some prominent classes of emerging contaminants such as pharmaceuticals and personal care products, surfactants and their degradation products, plasticizers, pesticides, insect repellents, and flame retardants. All determinations were carried out using a multiresidue analytical approach, based on the application of gas chromatographic and liquid chromatographic techniques coupled to mass spectrometric detection. The results confirmed a widespread occurrence of the emerging contaminants in municipal wastewaters of the region. The most prominent contaminant classes, determined in municipal wastewaters, were those derived from aromatic surfactants, including linear alkylbenzene sulphonates (LAS) and alkylphenol polyethoxylates (APEO), with the concentrations in raw wastewater reaching into the mg/l range. All other contaminants were present in much lower concentrations, rarely exceeding few microg/l. The most abundant individual compounds belonged to several classes of pharmaceuticals (antimicrobials, analgesics and antiinflammatories, beta-blockers and lipid regulators) and personal care products (fragrances). Due to the rather poor wastewater management practices in WB countries, with less than 5% of all wastewaters being biologically treated, most of the contaminants present in wastewaters reach ambient waters and may represent a significant environmental concern.     

Total Sites Integrating Renewables With Extended Heat Transfer and Recovery

The majority of industrial, residential, service, and business customers, as well as agriculture farms, are still dominated by fossil fuels as primary energy sources. They are mostly equipped with steam and/or gas turbines, steam boilers, and water heaters (running on electricity or gas) for conversion units. The challenge to increase the share of renewables in the primary energy mix could be met by integrating solar, wind, and biomass as well as some types of waste with the fossil fuels. This work analyzes some of the most common heat transfer applications at total sites comprising users of the types just mentioned. The energy demands, the local generation capacities, and the efficient integration of renewables into the corresponding total site CHP (combined heat and power) energy systems, based on efficient heat transfer, are optimized, minimizing heat waste and carbon footprint, and maximizing economic viability.     

Influence of oil phase concentration on droplet size distribution and stability of oil‐in‐water emulsions

The objective of this study was to investigate the effect of oil phase concentration, at different emulsification conditions concerning homogenization time and emulsifier content, on droplet size distribution and stability of corn oil‐in‐water emulsions. Emulsions were prepared with 3, 5, 10, and 20% w/w triethanolamine oleate (calculated on oil amount), 0.53% w/w carboxymethylcellulose (calculated on water amount), and 5, 10, 20, 30, or 40% w/w oil, and homogenized 5, 10, 20, and 60 min. It was found that increase in oil phase concentration led to decrease in specific surface area and increase in polydispersity of emulsion at lower emulsifier concentration and less intense homogenization. At emulsifier concentrations ≤10% and homogenization time ranges of 20–60 min the non‐monotonous variation in droplet size parameters with oil concentration was observed, as a result of the interaction between triethanolamine oleate and carboxymethylcellulose, which were confirmed by viscosity measurements. However, at emulsifier concentration of 20% an increase in specific surface area and decrease in polydispersity with the increase in oil concentration occurred due to an increase in equilibrium concentration of emulsifier in the continuous phase. Further, influence of oil concentration on emulsion creaming stability was found to be independent on emulsifier concentration and homogenization time. Therefore, a decrease in creaming with increase in oil concentration was observed in all the examined triethanolamine oleate (TEAO) concentration and homogenization time ranges. Practical applications: Emulsions are colloidal systems which can be encountered in different industrial sectors, such as food, pharmaceutical, cosmetics, oil industry, etc. Determination of the droplet size of emulsion is probably the most important way of their characterization, since it influences the properties of emulsion such as rheology, texture, shelf life stability, appearance, taste, etc. The size of the droplets depends on a wide range of parameters. One of them is certainly the concentration of the oil phase. However, since the impact of one parameter is often influenced with the intensity of the other variable involved in the emulsion generation, the aim of the present work was to examine the effect of corn oil concentration on droplet size parameters and stability of oil‐in‐water emulsions at different emulsification conditions. Therefore a step toward creation of emulsions with desired final properties was made.     

Synthesis and characterization of green urethane non-isocyanate from oleic acid for wood composite application

Conventional polyurethane (PU) is usually synthesized by a reaction between isocyanate and polyol. The use of isocyanate compounds is associated with significant health and environmental problems. Therefore, it is necessary to develop an environmentally friendly alternative method for manufacturing PUs without isocyanate routes. The aim of this research work was to synthesize green urethane from oleic acid, which included the following three stages: the synthesis of epoxidized oleic acid (EOA), the synthesis of carbonated oleic acid (COA), and the synthesis of green urethane from oleic acid (UOA). The resulting product was characterized by Fourier Transform Infrared Spectroscopy (FTIR) and Nuclear Magnetic Resonance (NMR) analyses, and by determining the iodine number, oxirane number, and hydroxyl value. The results of FTIR and NMR showed that EOA was successfully synthesized. The optimum COA synthesis process was obtained on TBAB catalyst usage of 1% (wt/wt) at 140°C for 48 h with a 500-rpm stirring rate and CO₂ gas flow rate of 0.2 mL/min with the resulting COA oxirane value of 0.00. The optimum condition of UOA synthesis through the aminolysis process resulted in the use of LiCl of 19.8% (wt/wt) at 70°C for 3 h with a stirring speed of 1200 rpm with a UOA hydroxyl number generated of 237.93 mg/mL.     

US-fluoroscopy registration for transcatheter aortic valve implantation

Transcatheter aortic valve implantation is a minimally invasive alternative to open-heart surgery for aortic stenosis in which a stent-based bioprosthetic valve is delivered into the heart on a catheter. Limited visualization during this procedure can lead to severe complications. Improved visualization can be provided by live registration of transesophageal echo (TEE) and fluoroscopy images intraoperatively. Since the TEE probe is always visible in the fluoroscopy image, it is possible to track it using fiducial-based single-perspective pose estimation. In this study, inherent probe tracking performance was assessed, and TEE to fluoroscopy registration accuracy and robustness were evaluated. Results demonstrated probe tracking errors of below 0.6 mm and 0.2°, a 2-D RMS registration error of 1.5 mm, and a tracking failure rate of below 1%. In addition to providing live registration and better accuracy and robustness compared to existing TEE probe tracking methods, this system is designed to be suitable for clinical use. It is fully automatic, requires no additional operating room hardware, does not require intraoperative calibration, maintains existing procedure and imaging workflow without modification, and can be implemented in all cardiac centers at extremely low cost.     

Measurement uncertainty of adaptive Chirp-z transform

In this paper analysis of measurement uncertainty of Adaptive Chirp-z transform (ACT) algorithm for power frequency measurement is presented. ACT is a new algorithm developed for real time monitoring of power frequency. Every element (hardware and software) of measurement chain is contributing to the total measurement uncertainty. The analysis of passive voltage dividers, analog-to-digital converters, numeric algorithms and processors (word length and type of arithmetic) are also presented. Estimated values of each contributing part of measurement chain are calculated to the final expression of measurement uncertainty.