Microstructural and compositional aspects of ZnO-based varistor ceramics prepared by direct mixing of the constituent phases and high-energy milling

ZnO-based varistor samples were prepared by the direct mixing of the constituent phases (DMCP) and sintering at 1100 °C for 2 h. The influence of the starting powder mixture's composition – the amounts of the pre-reacted varistor compounds and their composition – and its preparation, either with or without mechano-chemical activation (MCA), on the microstructure, phase composition and electrical characteristics of the varistor samples was studied. It showed that MCA improved the density and microstructural homogeneity of the varistor samples. MCA strongly affected the grain growth: it enhanced the nucleation of inversion boundaries (IBs) in the ZnO grains and the IBs-induced grain-growth mechanism resulted in uniform grain growth and hence a microstructure with smaller ZnO grains and a narrower grain size distribution. The final phase composition of the samples prepared by the DMCP method mainly depended on the presence of varistor dopants that can prevent the formation of the pyrochlore phase, especially Cr₂O₃, while MCA can affect it mostly by providing a homogeneous distribution of those dopants. The DMCP varistor samples prepared with MCA had much better current–voltage characteristics than the samples of the same composition prepared from unactivated powders.     

An approach to efficient business intelligent system for financial prediction

A concept of business intelligent system for financial prediction is considered in this paper. It provides data needed for fast, precise and good business decision support to all levels of management. The aim of the project is the development of a new online analytical processing oriented on case-based reasoning (CBR) where a previous experience for every new problem is taken into account. Methodological aspects have been tested in practice as a part of the management information system development project of “Novi Sad Fair”. A case study of an improved application of CBR in prediction of future payments is discussed in the paper. This paper is originally presented at The International Conference on Hybrid Information Technology 2006, at the special session on “Intelligent Information Systems for Financial Engineering”, November 2006 in Cheju Island, Korea.     

Changes in polymer foils used in food packaging tested by using differential scanning calorimetry

This work is an experimental study of the differential scanning calorimetry characterisation of polymer materials used in food packaging materials, such as polypropylene (0.03 mm), polyethylene (0.1 and 0.03 mm), poly(D-(-)-Β-hydroxybutyrate) (powder), two-layered polypropylene (0.064 mm), and two-layered polypropylene with poly-vinylidene-chloride (0.012/0.021). The polymer stability was checked by simulation of conditions during food preparation in microwave ovens, sterilisation or rapid freezing. The materials were tested in the temperature range from 40 to 200‡C at different scan rates from 2 to 30°C min⁻¹ during heating or cooling. The enthalpies show a high correlation coefficient (0.964) with scan rate. All samples undergo phase change in the temperature range from 107 to 173°C during heating and enthalpies are in the range from 31.8 to 71.1Jg⁻¹. Upon subsequent cooling from 200°C, the temperature range of phase changes is shifted to lower temperatures from 86 to 102°C with enthalpies ranging from 30.4 to 57.8 J g⁻¹. Experiments with exposure of polymers to microwave radiation and freezing prove that the phase change considering the temperature range is very similar in all experiments.     

Vortices in anisotropic type-II superconductors

We present a generalized variational model of an isolated vortex, valid in the anisotropic case when the external magnetic field is along one of the symmetry directions. We discuss the effects of the field anisotropy on the core and magnetic pinning of individual vortices.     

How to Control Robots Interacting with Dynamic Environment

The goal of this paper is to shed light on the control problem of constrained robot motion from the aspect of the dynamical nature of the environment with which the robot is in contact. Therefore, the criticism of traditional hybrid control which allows position/force feedback loops to split into independent control with respect to position and force, is not the main point we want to make. Reference to the papers written by the founders of hybrid control and their numerous followers served only to better understand the reason and motivation for suggesting a different approach to control of robots interacting with environment.The paper has a predominantly review character, based on recently published work. It also contains some new, unpublished results in the framework of the unified approach to the position/force control of robots, proposed by the present author and his co-workers. By pointing to the possibility of introducing an environment dynamics in the contact tasks of the machining type, the author emphasizes that the proposed dynamically interactive control can be applied to a completely different class of tasks, in which a contact is made between the system (constructions or structure) and very specific kinds of dynamic environments.     

Quantum phase transitions in 2D antiferromagnets

Quantum Monte Carlo results for the T = 0 order-disorder transition of two-dimensional dimerized quantum Heisenberg antiferromagnets are presented. For a two-layer model, with the dimers having one member on each plane, the finite-size scaling of the staggered structure factor and the staggered susceptibility is consistent with the 3D classical Heisenberg universality class, as required if the transition is described by the 2+1-dimensional non-linear sigma-model. However, for models with the dimers in a single plane, the behavior does not appear to be consistent with this universality class.     

Subsecond thermophysics research at the Boris Kidrich Institute Vincha

In the early eighties, at the Boris Kidrich Institute Vincha, a method for measuring specific heat and electrical resistivity of electrical conductors in the millisecond resolution range was developed for measurements from room temperature to 1900 K. Over a period of nearly 10 years, the method was applied to different materials, including pure metals, ferrous, and nickel/ chromium alloys, and to the characterization of candidate materials for thermophysical property reference standards. This paper describes the method and reviews the results obtained in specific heat and electrical resistivity studies of ferromagnetic and other materials. The paper also demonstrates capabilities of the method for describing phase transitions or anomalies in pure metals (Fe, Co, Ni) or alloys (Nichrome, austenitic stainless steel).Paper presented at the Second Workshop on Subsecond Thermophysics, September 20–21, 1990, Torino, Italy.     

On some interval methods for algebraic,exponential and trigonometric polynomials

New inclusion methods for the simultaneous determination of the zeros of algebraic, exponential and trigonometric polynomials are presented. These methods are realized in real interval arithmetic and do not use any derivatives. Using Weierstrass' correction some modified methods with the increased convergence rate are constructed. Convergence analysis and numerical example are included.     

An approach to emulating separable graphs

A technique foremulating multicomputer interconnection networks that are based onseparable graphs (graphs having bounded degree and sublinear multicolor recursive bisectors) is presented. Efficient emulations among interconnection networks are necessary for porting programs designed for one network to another.Emulations are formalized asgraph embeddings, where the nodes (processors) of theguest graph (emulated network) are assigned to nodes of thehost graph (emulator), while the edges (communication links) of the guest are routed via paths in the host. The communication slowdown in an emulation depens on thedilation (length of the longest routing path) and thecongestion (number of paths that contend for a host edge) of the embedding. Theexpansion of the embedding (the ratio of the sizes of the host to guest) determines the inefficiency of processor utilization. Cell trees are introduced as interconnection networks whose special communication properties enable them to serve as intermediate devices in these emulations. Nodes in cell trees are organized into equinumerous parts calledcells; the cells are labeled by nodes of a complete binary tree. Communication in cell trees is restricted to two specific and distinct primitives:cell communication is confined within cells, whiletransfer communication occurs between adjacent cells. Rather than solved directly, the emulation problem for the original guest-host pair is decomposed into two independent parts: emulating the guest by the cell tree, and emulating the cell tree by the host.In emulations of separable graphs by cell trees, the node assignment that ensures small dilation is derived from the separator-based decomposition of guest graphs. The congestion-free edge routing is achieved by coordinatingglobal andlocal phases, which are based on two characteristic cell-tree communication primitives.The technique is instantiated by emulating cell trees on specific host graphs. Withshuffle-like hypercube-derivative networks as hosts new constant-expansion emulations are obtained that have both dilation and congestion logarithmic in the size of the multicolor bisector of guest graphs. These emulations are the first such to have optimal (up to constants)congestion; they provide the firstoptimal algorithm for emulating arbitrary separable graphs on shuffle-like networks. The application of the technique tohypercubes as hosts also produces optimal emulations that differ from those previously known by having smaller expansion constants.This research was supported in part by NSF Grants CCR-88-12567 and CCR-90-13184, and by the University of Massachusetts Graduate School Fellowship for the academic year 1991-92. A preliminary version of this paper was presented at the 3rd ACM Symposium on Parallel Algorithms and Architectures, July 22–24, 1991, in Hilton Head, South Carolina, USA.     

Scientometric analysis of the research activities of chemists from the “Rugjer Bošković” Institute (Yugoslavia), 1976–1985

The research activity of chemists from the Rugjer Bokovi Institute (RBI, Zagreb, Yugoslavia) was analyzed for the period 1976–1985, covering 2018 research years of scientific work, and 1149 SCI registered papers (0.57 publications per research year). At the average, one paper was published by 3.05 scientists. The papers were published in 235 different journals, most frequently is the nationalCroatica Chemica Acta (171 papers). The publications were divided into two groups: for the periods 1976–1980 and 1981–1985, and for each paper citations were collected in the respective time period. An average publication had 2.58 citations. Chemical papers from the second period had 2.73 citations per paper, which is 85% of the expected value, and this was considerably more than for Yugoslav papers (66%) in general. The papers were classified according to the subfields used in theJournal Citation Reports, and the results compared with the data published bySchubert, Glänzel andBraun. The distribution of citations was also analyzed.