Strength,toughness and R-curve behaviour of SiC whisker-reinforced composite Si3N4 with reference to monolithic Si3N4

The flexural strength and fracture toughness of 30 vol% SiC whisker-reinforced Si₃N₄ material were determined as a function of temperature from 25 to 1400°C in an air environment. It was found that both strength and toughness of the composite material were almost the same as those of the monolithic counterpart. The room-temperature strength was retained up to 1100°C; however, appreciable strength degradation started at 1200°C and reached a maximum at 1400°C due to stable crack growth. In contrast, the fracture toughness of the two materials was independent of temperature with an average value of 5.66 MPam^1/2. It was also observed that the composite material exhibited no rising R-curve behaviour at room temperature, as was the case for the monolithic material. These results indicate that SiC whisker addition to the Si₃N₄ matrix did not provide any favourable effects on strength, toughness and R-curve behaviour.     

Non-linear properties of polymer cellular materials with a negative Poisson's ratio

Negative Poisson's ratio polymeric cellular solids (re-entrant foams) were studied to ascertain the optimal processing procedures which give rise to the smallest value of Poisson's ratio. The non-linear stress-strain relationship was determined for both conventional and re-entrant foams; it depended upon the permanent volumetric compression achieved during the processing procedure. Poisson's ratio of re-entrant foam measured as a function of strain was found to have a relative minimum at small strains. The toughness of re-entrant foam increased with permanent volumetric compression, and hence with density.     

Computer interface design: A user-centered approach

Enhancing the way people use computers to perform tasks has become a very important issue in interface design and human-computer interactions. When the concept of human-computer interaction first began to emerge it was commonly understood as the hardware and software through which a human and computer could effectively communicate (Laurel, 1990). This effective communication is also know as user-friendliness. The concept of user friendliness has recently been expanded to include various attributes and cognitive aspects of the user's needs and experiences. Focus should be on the user's experiences, expectations, preferences, and cognitive aspects in developing efficient and effective computer interface designs. It is the basic premise of this paper to emphasize using a user-centered design in developing computer interfaces.     

Effects of category prototypes on performance-rating accuracy.

Two studies examined whether the accessibility of performance prototypes influences performance appraisals. Pilot studies revealed students used performance prototypes when rating instructor performance. Study 1 manipulated the accessibility of these prototypes and the time delay of performance ratings. Results showed no effect of the prime on rating error and accuracy; however, discrimination accuracy decreased over time and recognition bias became more conservative. Study 2 manipulated prototype accessibility and type of rating stimuli (videotape vs. vignette). Rating accuracy and recall were higher for vignette than videotape stimuli, and only those participants exposed to the vignette exhibited priming effects. Results supported transfer-appropriate processing and implied that cognitive primes may have a stronger effect on performance ratings based on "paper-people" than videotaped stimuli. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Dusts,scale, slags,sludges... Not wastes,but sources of profits

Historically, the steel industry has focused on the need for and the many benefits of recycling steel that is discarded either in its own or in its customers’ manufacturing processes, as well as in recovery and reuse of steel scrap that arises after the product has served its intended purpose. In fact, modern steelmaking relies on the use of recycled iron units for at least half of its production. The other side of the story is the fate of the non-steel by-products (e.g., oxide dusts, sludges, scales, slags, spent refractories and the contained “low grade” energy units that are generated as natural adjuncts to iron and steelmaking processes). These valuable by-products often are classified as “wastes” and are discarded to landfills, at significant cost, although in reality they offer significant potential for cost savings or profit if reintroduced into the industrial arena via well planned programs. Examples of such instances will be presented, including energy credit issues, in the hope of pointing the way for future expansion of benefits from these opportunities. Preparing for a challenge and honor such as the Howe Memorial Lecture, one has to stand in awe of the accomplishments of the predecessor we honor in this forum. He worked in the early days of our industry without the benefits of the many technological improvements he and his successors brought to play as the years went by. John Stubbles, in his Howe Memorial Lecture in 1997,_[1] presented a masterful and entertaining biography of Howe and his very active and prolific life. Perhaps the most telling quotation he attributed to Howe is very pertinent to the topic we will address presently: “Metallurgy lives by profit, not logic,” to which I would like to add a comment that bears on the topic of this lecture from the 1991 Howe lecturer, my friend and mentor Bill Dennis, “Where there is muck, there is money.” There are numerous examples of “one hand washes the other” in this business; that is, of the synergism between needs and capabilities. We will address some of these situations, such as in a new process under development for dezincing of post consumer scrap, and in the use of iron units in by-product oxides and recycling of ladle slags and of spent refractories. Peter J. Koros, the Iron and Steel Society’s 77th Howe Memorial Lecturer (2001), is Principal of Koros Associates, Inc. (Pittsburgh, PA), a consultancy he founded following retirement from the former LTV Steel Company where he worked for nearly 41 years, retiring as Senior Research Consultant. He earned the Bachelor of Science degree in Metallurgical Engineering from Drexel University, and his master’s and doctoral degrees in Metallurgy from the Massachusetts Institute of Technology (MIT). In 1958, he joined Jones and Laughlin Steel (which became LTV Steel Company), where he held positions in research (Director, Process Metallurgy), Technical Services and Quality Control, with most activities focused on steelmaking and related areas. He was responsible for J&L’s development work in injection technology for desulfurization of hot metal and steel, was the inventor of the patented co-injection concept now in use worldwide, and had the lead role in LTV Steel’s programs for degalvanizing scrap and for recovery and utilization of by-product oxides. He led the AISI Opt-In program for degalvanizing scrap and the LTV-USS pilot program for processing “by-product” oxides. Koros has authored more than 75 publications and presentations, and holds eight U.S. patents, the latest issued in 2000. Dr. Koros was elected a Distinguished Member and Fellow of the ISS in 1984 and a Fellow of ASM International in 1988. Other honors include the ISS Distinguished Service Award (1998), ISS Electric Furnace Honorable Mention Citation (1987), International Magnesium Association Design and Applications Award (1978), AISI Gold (1977) and Silver (1969) Medals, ISS Herty (1963), McKune (1963), and Toy (1962) Awards. Koros served on the Technical Advisory Committee of the AISI-DOE Direct Steelmaking Program and its follow-on Waste Oxide Recycling Program. He was chairman of the AISI Task Force on Degalvanizing Steel Scrap and of the Industrial Advisory Panel to the Argonne Lab-MRI Program on Dezincing Steel Scrap. The 2001 Howe Memorial Lecture, titled “Dusts, Scale, Slags, Sludges ... Not Wastes But Sources of Profits,” as well as an invited Keynote Lecture for an International Recycling Conference in Sweden (June 2002, “Iron Units in Search of a Home: New Steel”) were based on the experience from these programs. Koros has been an active member of the ISS Advanced Technology Committee for which he participated in and chaired several symposia, including New Melting Technologies II (October 2002) and the first New Melting Technologies Symposium (1997). He was Director of the ISS 2000 Short Course on Injection Technology, a lecturer in the 2000 ISS/AISI Course on BOF Steelmaking, lead Co-chairman for the Elliott Symposium (1990), and Chairman of the Program Committee for the Fifth International Iron and Steel Congress (1986). Dr. Koros served on the Industrial Advisory Board of MIT’s Materials Processing Center (1995–98) and the AISI’s Iron and Steel Research Subcommittee (1976–86.) He was chairman of the ISS National Science Foundation Advisory Committee, the Advisory Council of the U.S. Bureau of Mines Generic Minerals Technology Center for Pyrometallurgy Research (1983–85), and of the Advisory Board for Carnegie Mellon University’s Center for Iron and Steel Research, for which he served as chairman (1991–1992). Service included participation in the NRC-NAS Alternative Energy and Development Strategy Study (1989–90.) Koros was very active in the creation of the ISS, having served as Chairman of the predecessor TMS Iron and Steel Division in 1972–73 and on the AIME Board of Directors (1974). Professional Society memberships: ISS (elected Distinguished Member and Fellow, Life Member), TMS (Senior or Life Member), ASM International (elected Fellow, Life Member), and AISE.     

Development of brief scales to monitor clients' constructions of change.

This article describes the development and validation of scales to measure clients' outcome optimism, perceived progress, and self-agency related to change in problems presented in therapy. In Study 1, initial confirmatory and subsequent exploratory factor analyses (N?=?257) identified effort and persistence as an additional unique factor and guided selection of items to measure the 4 constructs. In Study 2, confirmatory factor analysis of the revised scales with a new sample (N?=?93) confirmed the measurement model. Results of convergent and discriminant validity analyses generally were in the predicted directions. The Perceived Progress scale demonstrated criterion validity with changes in dyadic adjustment and family functioning. The Outcome Optimism and Self-Agency scales showed variability in their relationship to the Perceived Progress scale over the first 3 sessions of therapy. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Possibility of sewage and combined sewer overflow reuse with biological aerated filters.

The secondary effluent from municipal plants in Korea generally represents higher BOD with lower SS. Therefore, more soluble forms of organics and NH4-N need to be removed to improve its effluent for reuse. In this study reuse possibility of secondary effluent and CSO (combined sewer overflow) using BAF (biological aerated filter) was evaluated. The tertiary application with 1.2 h EBCT, SS, BOD and COD showed stable concentrations less than 1.3, 1.3 and 6.2 mg/L, respectively. Nitrogen could be nitrified even at 7 degrees suggesting BAF can be used for a water reuse method as well as an effective add-on facility in cold regions. However, BAF was not stable with CSO application at increased flow rates suggesting CSO must be equalised prior to application. Disinfection was necessary even during normal weather conditions.