Effects of the Use of Pore Formers on Performance of an Anode Supported Solid Oxide Fuel Cell

The effects of amount of pore former used to produce porosity in the anode of an anode supported planar solid oxide fuel cell were examined. The pore-forming material utilized was rice starch. The reduction rate of the anode material was measured by Thermogravimetric analysis to qualitatively characterize the gas transport within the porous anode materials. Fuel cells with varying amounts of porosity produced by using rice starch as a pore former were tested. The performance of the fuel cell was the greatest with an optimum amount of pore former used to create porosity in the anode. This optimum is believed to be related to a trade off between increasing gas diffusion to the active three-phase boundary region of the anode and the loss of performance because of the replacement of active three-phase boundary regions of the anode with porosity.     

Subunit‐Specific Labeling of Ubiquitin Chains by Using Sortase: Insights into the Selectivity of Deubiquitinases

Information embedded in different ubiquitin chains is transduced by proteins with ubiquitin‐binding domains (UBDs) and erased by a set of hydrolytic enzymes referred to as deubiquitinases (DUBs). Understanding the selectivity of UBDs and DUBs is necessary for decoding the functions of different ubiquitin chains. Critical to these efforts is the access to chemically defined ubiquitin chains bearing site‐specific fluorescent labels. One approach toward constructing such molecules involves peptide ligation by sortase (SrtA), a bacterial transpeptidase responsible for covalently attaching cell surface proteins to the cell wall. Here, we demonstrate the utility of SrtA in modifying individual subunits of ubiquitin chains. Using ubiquitin derivatives in which an N‐terminal glycine is unveiled after protease‐mediated digestion, we synthesized ubiquitin dimers, trimers, and tetramers with different isopeptide linkages. SrtA was then used in combination with fluorescent depsipeptide substrates to effect the modification of each subunit in a chain. By constructing branched ubiquitin chains with individual subunits tagged with a fluorophore, we provide evidence that the ubiquitin‐specific protease USP15 prefers ubiquitin trimers but has little preference for a particular isopeptide linkage. Our results emphasize the importance of subunit‐specific labeling of ubiquitin chains when studying how DUBs process these chains.     

Filler Wetting in Miscible ESBR/SSBR Blends and Its Effect on Mechanical Properties

The selective wetting behavior of silica in emulsion styrene butadiene rubber (ESBR)/solution styrene butadiene rubber (SSBR) blends is characterized by the wetting concept, which is further developed for filled blends based on miscible rubbers. It is found that not only the chemical rubber–filler affinity but also the topology of the filler surface significantly influences the selective filler wetting in rubber blends. The nanopore structure of the silica surface has been recognized as the main reason for the difference in the wetting behavior of the branched ESBR molecules and linear SSBR molecules. However, the effect of nanopore structure becomes more significant in the presence of silane. It is discussed that the adsorption of silane on silica surface constricts the nanopore to some extent that hinders effectively the space filling of the nanopores by the branched ESBR molecules but not by the linear SSBR molecules. As a result, in silanized ESBR/SSBR blends the dominant wetting of silica surface by the tightly bonded layer of SSBR molecules causes a low‐energy dissipation in the rubber–filler interphase. That imparts the low rolling resistance to the blends similar to that of a silica‐filled SSBR compound, while the ESBR‐rich matrix warrants the good tensile behavior, i.e., good abrasion and wear resistance of the blends.

     

Highly sensitive electrochemical sensor based on zirconium oxide-decorated gold nanoflakes nanocomposite 2,4-dichlorophenol detection

Journal of Applied Electrochemistry - In this study, a sensitive and selective electrochemical sensor based on a zirconia oxide-decorated gold nanoflake nanocomposite-modified glassy carbon...     

Towards the detection of human papillomavirus infection by a reagentless electrochemical peptide biosensor

In the present work, we report first results about a technology using a conjugated copolymer poly(5-hydroxy-1,4-naphthoquinone-co-5-hydroxy-2-carboxyethyl-1,4-naphthoquinone) acting both as immobilizing and transducing element for reagentless immunosensor, and its application for the detection of HPV infection. It was shown that the reagentless immunosensor was able to detect the interaction between antigenic peptide L1 from HPV-16 major capsid protein, a dominant epitope involved in viral infection as well as in prophylactic vaccine, and the relevant antibody.     

Influence of some vegetable oils on the photocrosslinking of coatings based on an o-cresol novolac epoxy resin and a bis-cycloaliphatic diepoxide

The influence of cashew nut shell oil (CNO), epoxidized soybean oil (ESO), castor oil (CO), and dioctyl phtalate (DOP) on the photocrosslinking kinetics of UV curable mixtures containing an o-cresol novolac epoxy resin (CNE), a bis-cycloaliphatic diepoxide monomer (BCDE), and a triarylsulfonium salt (TAS) as a cationic photoinitiator has been studied. The formulation with a weight ratio CNE/BCDE/TAS of 60/40/5 was found to have the highest cure rate and the greatest final conversion of epoxy groups upon UV exposure. The presence of an unsaturated oil or of DOP in the UV curable formulation, at a content ranging from 0.07 to 0.79 mol/kg, was shown to increase the initial polymerization rate of the epoxy groups from 12 up to 31 mol/kg s, and the epoxy conversion after 18 s UV exposure from 80 up to 95%. It was found that the UV cured coatings containing CNO or DOP at concentrations between 0.3 and 0.6 mol/kg and ESO at concentrations between 0.12 and 0.19 mol/kg exhibit the best performance. These results were explained by a number of competitive factors, mainly the effects of the chemical structure and content of the oils and of DOP on the polarity, viscosity, compatibility, and internal filter effect of the UV curable resins, as well as by the characteristics of the tridimensional polymer networks formed upon UV exposure. The materials produced under the optimal conditions determined in this study can be used as high performance decorative and protective coatings and also as adhesives in different sectors of applications.     

Vulcanized paper for separation of alcohol aqueous solutions by pervaporation

Paper membranes made from vulcanized cellulose were used for the pervaporation (PV) of aqueous solutions containing methanol, ethanol, and isopropanol. It was noted that the vulcanized cellulose paper membranes (VCPM) could effectively separate alcohol and water from the mixture solutions. To observe the effect of the separation of alcohol aqueous mixtures, the permeation behavior of water and alcohol was examined by means of the separation factor and the permeation flux. The values of the permeation flux in the ethanol/water mixtures were found to vary from 6.2 kg/m²h to 2.1 kg/m²h, as the concentration of ethanol increased from 8 to 87 wt %, and the separation factor (α) changed from α = 2.6 to 6.6, respectively. This showed that the VCPM enhanced the separation of water and alcohol. The highest value observed for the permeation flux was 11 kg/m²h at 87 wt % of methanol concentration and the separation factor at this condition was 4.1. It was shown also that an efficient separation was obtained in the isopropanol/water mixture with a separation factor of 16.6. The contact angles of alcohol/water droplets on the VCPM were measured as well as the wettability of the membrane. There was a tendency of decrease for the contact angle, as the alcohol concentration decreased. This suggested that the solvent wettability decreased in high alcohol concentrations. It was concluded that a high permeabilitty of water through the VCPM resulted in the separation of alcohols and water in the PV process. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and characterization of chitosan/poly(acrylic acid) polyelectrolyte complex

Polyelectrolyte complex based on chitosan and acrylic acid monomer by photoinitiated free‐radical polymerization in the absence of crosslinker showed a large transition in swelling in response to changes in pH of surrounding medium. Their ability to swell arises from polyelectrolyte interactions and molecular structure of the complex. The main properties of interest that related to the molecular structure, swelling volumes, glass transition temperature, and elastic modulus of the complex were investigated. The effect of water content, the only variable in the sample component, played an important role in molecular structure of the complex and as a consequence, the extent of intermolecular linkage, especially amide bonds which in turn governed the degree of swelling of the polyelectrolyte complex in this study. The decreased degree of swelling and higher temperature shift of glass transition temperature was found with increased water content, whereas increased modulus of elasticity of dry complex was found in lower water content of synthesis component. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1025–1035, 2002     

Synthesis and characterization of (co)polymers containing a phosphonate function for use in dental composites

Novel monomers 1a, 1b, in which a phosphonate function is incorporated in both aromatic rings, were synthesized from the addition reaction of tetraisopropyl [2,2′-disulfanyl-5,5′-thiodiphenyl]-1,1′-diphosphonate and diisopropyl (2-sulfanylphenyl)-1-phosphonate with the glycidylmethacrylate. Free radical homo- and copolymerizations of phosphonate monomers containing methacrylate groups were first carried out in bulk and in THF solution. They offered (co)polymers for potential use in dental resins, in high yields and moderate to high inherent viscosities. The components and structure of the (co)polymers were confirmed by FTIR, SEC, ¹H, ³¹P NMR spectra.

Thermal analysis by using differential scanning calorimetry indicated an amorphous structure of the (co)polymers obtained by polymerization in solution. Upon UV-radiation the composite resins have been synthesized by cross-linking reaction.